{"title":"Excavator Auger Drives","description":"\u003cp\u003e\u003cstrong\u003eExcavator auger drives\u003c\/strong\u003e, also called earth drills, are the hydraulic drive units that turn an auger. The Auger Torque range covers 0.75 to 50 tonne excavators, from 1,164Nm to 152,319Nm of torque, and drives up to the 25000 MAX come with hoses.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eEarth drill\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eMax torque\u003c\/th\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003cth\u003eHole sizes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-1200-earth-drill\"\u003eAuger Torque 1200\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75–1 tonnes\u003c\/td\u003e\n\u003ctd\u003e1,164Nm\u003c\/td\u003e\n\u003ctd\u003e15–32 l\/min\u003c\/td\u003e\n\u003ctd\u003e30–185 bar\u003c\/td\u003e\n\u003ctd\u003e50mm round\u003c\/td\u003e\n\u003ctd\u003e100–300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eAuger Torque X1500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003ctd\u003e1,496Nm\u003c\/td\u003e\n\u003ctd\u003e20–45 l\/min\u003c\/td\u003e\n\u003ctd\u003e70–205 bar\u003c\/td\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003ctd\u003e100–400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eAuger Torque X2000\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e2,190Nm\u003c\/td\u003e\n\u003ctd\u003e25–57 l\/min\u003c\/td\u003e\n\u003ctd\u003e70–240 bar\u003c\/td\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003ctd\u003e100–450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eAuger Torque X2500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5–3 tonnes\u003c\/td\u003e\n\u003ctd\u003e2,847Nm\u003c\/td\u003e\n\u003ctd\u003e27–65 l\/min\u003c\/td\u003e\n\u003ctd\u003e70–240 bar\u003c\/td\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003ctd\u003e100–500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003eAuger Torque 3000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2–4 tonnes\u003c\/td\u003e\n\u003ctd\u003e2,877Nm\u003c\/td\u003e\n\u003ctd\u003e27–75 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003ctd\u003e100–600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003eAuger Torque 3500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5–4.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e3,614Nm\u003c\/td\u003e\n\u003ctd\u003e40–85 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003ctd\u003e100–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003eAuger Torque 4500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3–5 tonnes\u003c\/td\u003e\n\u003ctd\u003e4,499Nm\u003c\/td\u003e\n\u003ctd\u003e50–95 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003ctd\u003e100–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003eAuger Torque 5500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5–6 tonnes\u003c\/td\u003e\n\u003ctd\u003e5,477Nm\u003c\/td\u003e\n\u003ctd\u003e40–115 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003eAuger Torque 7000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e5–7 tonnes\u003c\/td\u003e\n\u003ctd\u003e6,931Nm\u003c\/td\u003e\n\u003ctd\u003e60–135 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003eAuger Torque 8000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6–8 tonnes\u003c\/td\u003e\n\u003ctd\u003e8,152Nm\u003c\/td\u003e\n\u003ctd\u003e70–150 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003eAuger Torque 12000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8–13 tonnes\u003c\/td\u003e\n\u003ctd\u003e11,995Nm\u003c\/td\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003eAuger Torque 15000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003ctd\u003e15,071Nm\u003c\/td\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003eAuger Torque 20000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e13–20 tonnes\u003c\/td\u003e\n\u003ctd\u003e19,564Nm\u003c\/td\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–240 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-25000-max-earth-drill\"\u003eAuger Torque 25000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e15–22 tonnes\u003c\/td\u003e\n\u003ctd\u003e24,755Nm\u003c\/td\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–240 bar\u003c\/td\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003ctd\u003e150–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 35,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e33,500Nm\u003c\/td\u003e\n\u003ctd\u003e100–225 l\/min\u003c\/td\u003e\n\u003ctd\u003e150–240 bar\u003c\/td\u003e\n\u003ctd\u003e110mm square\u003c\/td\u003e\n\u003ctd\u003e300–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 42,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e42,729Nm\u003c\/td\u003e\n\u003ctd\u003e100–225 l\/min\u003c\/td\u003e\n\u003ctd\u003e140–240 bar\u003c\/td\u003e\n\u003ctd\u003e110mm square\u003c\/td\u003e\n\u003ctd\u003e300–1,800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 65,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e66,589Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–320 bar\u003c\/td\u003e\n\u003ctd\u003e110mm square\u003c\/td\u003e\n\u003ctd\u003e300–2,400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque 70,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e71,280Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–300 bar\u003c\/td\u003e\n\u003ctd\u003e130mm square or hex\u003c\/td\u003e\n\u003ctd\u003e300–2,400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque 80,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e80,898Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–280 bar\u003c\/td\u003e\n\u003ctd\u003e130mm square or hex\u003c\/td\u003e\n\u003ctd\u003e300–2,400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque 100,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e100,069Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–350 bar\u003c\/td\u003e\n\u003ctd\u003e150mm hex\u003c\/td\u003e\n\u003ctd\u003eQuoted to suit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque 150,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e152,319Nm\u003c\/td\u003e\n\u003ctd\u003e100–340 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–340 bar\u003c\/td\u003e\n\u003ctd\u003e150mm hex\u003c\/td\u003e\n\u003ctd\u003eQuoted to suit\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eEach drive also needs a \u003ca href=\"\/collections\/auger-drive-hitches\"\u003ehitch\u003c\/a\u003e made to fit your machine and an \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eauger\u003c\/a\u003e that matches its output shaft. Drives from the 35,000 MAX up are quoted with their hitch and augers. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e shows how to match all three, or browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eRunning a skid steer, backhoe or truck crane? See the Auger Torque \u003ca href=\"\/products\/auger-torque-skid-steer-auger\"\u003eskid steer auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-backhoe-auger\"\u003ebackhoe auger\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-truck-crane-auger\"\u003etruck crane auger\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"auger-torque-1200-earth-drill","title":"Auger Torque 1200 Earth Drill for 0.75–1 Tonne Micro Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 1200 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 0.75–1 tonne micro excavators. It turns an auger with up to 1,164Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 300mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 15–32 l\/min of oil at 30–185 bar from your excavator's auxiliary circuit, and its 50mm round output shaft takes Auger Torque S2 augers. It's supplied with hoses and adaptors. Tell us your coupler type and size when you order.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-1200-single-pin-hitch\"\u003e1200 single pin hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e in the diameter you need, up to 300mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 1,164Nm of torque at 185 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 0.75–1 tonne micro excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 300mm across with S2 augers\u003c\/li\u003e\n  \u003cli\u003e50mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency planetary gearbox\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1200 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 1200\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-1010201000R2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e0.75–1 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e189–1,164Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e30–185 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e15–32 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e50mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S2 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eSingle pin hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 1200 needs a two-way auxiliary circuit that can supply 15–32 l\/min at up to 185 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003ePin diameter and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1200 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 1200 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 0.75–1 tonne micro excavators. Your machine's auxiliary circuit also needs to supply 15–32 l\/min at 30–185 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 300mm across with Auger Torque S2 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-1200-single-pin-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 15–32 l\/min at 30–185 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S2 augers with a 50mm round hub. See the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eX1500 earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104702927197,"sku":"21-1010201000R2000","price":1372.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-1200-earth-drill.png?v=1790925362"},{"product_id":"auger-torque-x1500-earth-drill","title":"Auger Torque X1500 Earth Drill for 1–2 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X1500 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 1–2 tonne mini diggers. It turns an auger with up to 1,496Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 400mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 20–45 l\/min of oil at 70–205 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 400mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 1,496Nm of torque at 205 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 1–2 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 400mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eX1500 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X1500\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2000501000R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e511–1,496Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e70–205 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e20–45 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e585mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe X1500 needs a two-way auxiliary circuit that can supply 20–45 l\/min at up to 205 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003eX1500 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the X1500 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 1–2 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 20–45 l\/min at 70–205 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 400mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 20–45 l\/min at 70–205 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-1200-earth-drill\"\u003e1200 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eX2000 earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104702959965,"sku":"21-2000501000R1000","price":1689.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x1500-earth-drill.png?v=1790925363"},{"product_id":"auger-torque-x2000-earth-drill","title":"Auger Torque X2000 Earth Drill for 1–2.5 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X2000 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 1–2.5 tonne mini diggers. It turns an auger with up to 2,190Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 450mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 25–57 l\/min of oil at 70–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 450mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 2,190Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 1–2.5 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 450mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eX2000 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2010501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e639–2,190Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e70–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e25–57 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e47kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e585mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe X2000 needs a two-way auxiliary circuit that can supply 25–57 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003eX2000 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the X2000 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 1–2.5 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 25–57 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 450mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 25–57 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eX1500 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eX2500 earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104702992733,"sku":"21-2010501100R1000","price":1815.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x2000-earth-drill.jpg?v=1790925363"},{"product_id":"auger-torque-x2500-earth-drill","title":"Auger Torque X2500 Earth Drill for 1.5–3 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X2500 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 1.5–3 tonne mini diggers. It turns an auger with up to 2,847Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 500mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 27–65 l\/min of oil at 70–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 500mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 2,847Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 1.5–3 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 500mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eX2500 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X2500\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1.5–3 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e830–2,847Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e70–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e27–65 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e48kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e585mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe X2500 needs a two-way auxiliary circuit that can supply 27–65 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003eX2500 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the X2500 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 1.5–3 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 27–65 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 500mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 27–65 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eX2000 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003e3000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104710496605,"sku":null,"price":1949.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x2500-earth-drill.webp?v=1790925449"},{"product_id":"auger-torque-3000-max-earth-drill","title":"Auger Torque 3000 MAX Earth Drill for 2–4 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 3000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 2–4 tonne mini diggers. It turns an auger with up to 2,877Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 600mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 27–75 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 600mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 2,877Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 2–4 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 600mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 3000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2320501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–4 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e959–2,877Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e27–75 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e71kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e665mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 3000 MAX needs a two-way auxiliary circuit that can supply 27–75 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e3000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 3000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 2–4 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 27–75 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 600mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 27–75 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eX2500 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003e3500 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104710529373,"sku":"21-2320501100R1000","price":2194.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-3000-max-earth-drill.jpg?v=1790925449"},{"product_id":"auger-torque-3500-max-earth-drill","title":"Auger Torque 3500 MAX Earth Drill for 2.5–4.5 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 3500 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 2.5–4.5 tonne mini diggers. It turns an auger with up to 3,614Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 750mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 40–85 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 750mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 3,614Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 2.5–4.5 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 750mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3500 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 3500 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2330501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2.5–4.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e1,205–3,614Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e40–85 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e73kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e665mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 3500 MAX needs a two-way auxiliary circuit that can supply 40–85 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e3500 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 3500 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 2.5–4.5 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 40–85 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 750mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 40–85 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003e3000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003e4500 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104710824285,"sku":"21-2330501100R1000","price":2321.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-3500-max-earth-drill.png?v=1790925451"},{"product_id":"auger-torque-4500-max-earth-drill","title":"Auger Torque 4500 MAX Earth Drill for 3–5 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 4500 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 3–5 tonne mini diggers. It turns an auger with up to 4,499Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 900mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 50–95 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 900mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 4,499Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 3–5 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 900mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4500 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 4500 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3350501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e3–5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e1,500–4,499Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e50–95 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e75kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e665mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 4500 MAX needs a two-way auxiliary circuit that can supply 50–95 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4500 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 4500 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 3–5 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 50–95 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 900mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 50–95 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003e3500 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003e5500 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104735891805,"sku":"21-3350501100R1000","price":2454.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-4500-max-earth-drill.png?v=1790925534"},{"product_id":"auger-torque-5500-max-earth-drill","title":"Auger Torque 5500 MAX Earth Drill for 4.5–6 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 5500 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 4.5–6 tonne excavators. It turns an auger with up to 5,477Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 750mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 40–115 l\/min of oil at 80–260 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S5 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e in the diameter you need, up to 750mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 5,477Nm of torque at 260 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 4.5–6 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 750mm across with S5 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e5500 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 5500 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3432201200S2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4.5–6 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e1,685–5,477Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e40–115 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e108kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e780mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFencing and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree planting\u003c\/li\u003e\n  \u003cli\u003eFoundation and pile holes\u003c\/li\u003e\n  \u003cli\u003eLighting columns and sign posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 5500 MAX needs a two-way auxiliary circuit that can supply 40–115 l\/min at up to 260 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e5500 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 5500 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 4.5–6 tonne excavators. Your machine's auxiliary circuit also needs to supply 40–115 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 750mm across with Auger Torque S5 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 40–115 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S5 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003e4500 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003e7000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104736022877,"sku":"21-3432201200S2000","price":3121.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-5500-max-earth-drill.png?v=1790925535"},{"product_id":"auger-torque-7000-max-earth-drill","title":"Auger Torque 7000 MAX Earth Drill for 5–7 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 7000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 5–7 tonne excavators. It turns an auger with up to 6,931Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 900mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 60–135 l\/min of oil at 80–260 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S5 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e in the diameter you need, up to 900mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 6,931Nm of torque at 260 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 5–7 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 900mm across with S5 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e7000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 7000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3542201300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e5–7 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e2,133–6,931Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e60–135 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e112kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e780mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFencing and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree planting\u003c\/li\u003e\n  \u003cli\u003eFoundation and pile holes\u003c\/li\u003e\n  \u003cli\u003eLighting columns and sign posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 7000 MAX needs a two-way auxiliary circuit that can supply 60–135 l\/min at up to 260 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e7000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 7000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 5–7 tonne excavators. Your machine's auxiliary circuit also needs to supply 60–135 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 900mm across with Auger Torque S5 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 60–135 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S5 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003e5500 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003e8000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104736121181,"sku":"21-3542201300S2600","price":4002.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-7000-max-earth-drill.png?v=1790925536"},{"product_id":"auger-torque-8000-max-earth-drill","title":"Auger Torque 8000 MAX Earth Drill for 6–8 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 8000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 6–8 tonne excavators. It turns an auger with up to 8,152Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,200mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 70–150 l\/min of oil at 80–260 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S5 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e in the diameter you need. This drive can turn up to 1,200mm, and the S5 augers we supply go up to 1,000mm; ask us if you need a bigger hole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 8,152Nm of torque at 260 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 6–8 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,200mm across with S5 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e8000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 8000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3552201300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–8 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e2,717–8,152Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e70–150 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e116kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e780mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFencing and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree planting\u003c\/li\u003e\n  \u003cli\u003eFoundation and pile holes\u003c\/li\u003e\n  \u003cli\u003eLighting columns and sign posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 8000 MAX needs a two-way auxiliary circuit that can supply 70–150 l\/min at up to 260 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e8000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 8000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 6–8 tonne excavators. Your machine's auxiliary circuit also needs to supply 70–150 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,200mm across with Auger Torque S5 augers, depending on the ground. The S5 augers we supply go up to 1,000mm.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 70–150 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S5 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003e7000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003e12000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104803819869,"sku":"21-3552201300S2600","price":4230.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-8000-max-earth-drill.png?v=1790925631"},{"product_id":"auger-torque-12000-max-earth-drill","title":"Auger Torque 12000 MAX Earth Drill for 8–13 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 12000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 8–13 tonne excavators. It turns an auger with up to 11,995Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,000mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003e12000–15000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,000mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 11,995Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 8–13 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,000mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 12000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4072201300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e8–13 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e3,998–11,995Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e172kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e930mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 12000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e12000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 12000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 8–13 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,000mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 80–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003e8000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003e15000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104804442461,"sku":"21-4072201300S2600","price":5334.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-12000-max-earth-drill.png?v=1790925632"},{"product_id":"auger-torque-15000-max-earth-drill","title":"Auger Torque 15000 MAX Earth Drill for 10–15 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 15000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 10–15 tonne excavators. It turns an auger with up to 15,071Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,200mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003e12000–15000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,200mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 15,071Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 10–15 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,200mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e15000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 15000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4040001300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e5,024–15,071Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e173kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e930mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 15000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e15000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 15000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 10–15 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,200mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 80–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003e12000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003e20000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104805294429,"sku":"21-4040001300S2600","price":5499.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-15000-max-earth-drill.png?v=1790925632"},{"product_id":"auger-torque-20000-max-earth-drill","title":"Auger Torque 20000 MAX Earth Drill for 13–20 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 20000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 13–20 tonne excavators. It turns an auger with up to 19,564Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,000mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 160–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hydraulic hoses. Quick couplers aren't included, and Auger Torque recommends plumbing it in directly for the best flow.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003e20000–25000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,000mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 19,564Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 13–20 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,000mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hydraulic hoses (quick couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e20000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 20000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4530001300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e13–20 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e13,043–19,564Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e160–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e268kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1,130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHydraulic hoses included; quick couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 20000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Quick couplers aren't included: Auger Torque recommends plumbing it in directly for the best flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e20000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 20000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 13–20 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 160–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,000mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hydraulic hoses, and you choose the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 160–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003e15000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-25000-max-earth-drill\"\u003e25000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104889737565,"sku":"21-4530001300S2600","price":8585.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-20000-max-earth-drill.png?v=1790925846"},{"product_id":"auger-torque-25000-max-earth-drill","title":"Auger Torque 25000 MAX Earth Drill for 15–22 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 25000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 15–22 tonne excavators. It turns an auger with up to 24,755Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,500mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 160–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hydraulic hoses. Quick couplers aren't included, and Auger Torque recommends plumbing it in directly for the best flow.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003e20000–25000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,500mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 24,755Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 15–22 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,500mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hydraulic hoses (quick couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e25000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 25000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4540000500S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e15–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e16,503–24,755Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e160–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e269kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1,130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHydraulic hoses included; quick couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 25000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Quick couplers aren't included: Auger Torque recommends plumbing it in directly for the best flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e25000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 25000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 15–22 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 160–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,500mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hydraulic hoses, and you choose the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 160–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003e20000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104890032477,"sku":"21-4540000500S2600","price":8911.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-25000-max-earth-drill.png?v=1790925847"},{"product_id":"auger-torque-35000-65000-max-earth-drills","title":"Auger Torque 35,000–65,000 MAX Earth Drills for 20–45 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 35,000 MAX, 42,000 MAX and 65,000 MAX\u003c\/strong\u003e are heavy duty earth drills for 20 to 45 tonne excavators. With up to 66,589Nm of torque, they turn PA augers from 300mm to 2.4m across for foundation piles, poles and masts, and deep, large diameter holes.\u003c\/p\u003e\n\u003cp\u003eEach drive has Auger Torque's planetary gearbox, a single-piece non-dislodgement shaft and a 110mm square output shaft that takes PA augers. A case drain line is required, and an optional 2-way valve lets you run the drive from a single-acting hammer circuit.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eHole sizes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e35,000 MAX\u003c\/td\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e20,937–33,500Nm\u003c\/td\u003e\n\u003ctd\u003e100–225 l\/min\u003c\/td\u003e\n\u003ctd\u003e150–240 bar\u003c\/td\u003e\n\u003ctd\u003e11–26 rpm\u003c\/td\u003e\n\u003ctd\u003e442kg\u003c\/td\u003e\n\u003ctd\u003e300–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42,000 MAX\u003c\/td\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e24,925–42,729Nm\u003c\/td\u003e\n\u003ctd\u003e100–225 l\/min\u003c\/td\u003e\n\u003ctd\u003e140–240 bar\u003c\/td\u003e\n\u003ctd\u003e9–20 rpm\u003c\/td\u003e\n\u003ctd\u003e442kg\u003c\/td\u003e\n\u003ctd\u003e300–1,800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e33,295–66,589Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–320 bar\u003c\/td\u003e\n\u003ctd\u003e8–21 rpm\u003c\/td\u003e\n\u003ctd\u003e480kg\u003c\/td\u003e\n\u003ctd\u003e300–2,400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e110mm square (adaptors available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque PA augers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eSingle pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1411mm (35,000 and 42,000 MAX), 1556mm (65,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e406mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase drain line\u003c\/th\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptions\u003c\/th\u003e\n\u003ctd\u003e2-way valve and pressure relief valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 66,589Nm of torque\u003c\/li\u003e\n\u003cli\u003eDrills holes up to 2.4m across with PA augers\u003c\/li\u003e\n\u003cli\u003ePlanetary gearbox to multiply the motor's torque\u003c\/li\u003e\n\u003cli\u003eSingle-piece non-dislodgement shaft, with a lifetime warranty against dislodgement\u003c\/li\u003e\n\u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n\u003cli\u003eForged hood ears with locked hood pins\u003c\/li\u003e\n\u003cli\u003eOptional 2-way valve and pressure relief valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThese drives need a high flow two-way auxiliary circuit and a case drain line, so check your excavator's flow and pressure against the table. Send us your excavator make, model and weight, its pin sizes, and the hole diameters and depths you need.\u003c\/p\u003e\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e compares every drive from 0.75 to 50 tonnes. We'll quote the drive, hitch and \u003ca href=\"\/products\/auger-torque-pa-auger\"\u003ePA augers\u003c\/a\u003e together. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e to get started.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eNeed more torque? See the \u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque high torque earth drills\u003c\/a\u003e, from 70,000 to 150,000 MAX. Drilling rock? See the \u003ca href=\"\/products\/auger-torque-hard-rock-auger\"\u003eAuger Torque hard rock auger\u003c\/a\u003e. For excavators up to 22 tonnes, compare our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66281687220573,"sku":"AT-35000-65000-MAX","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/20-45T-e1746541312363.png?v=1792596049"},{"product_id":"auger-torque-high-torque-earth-drills","title":"Auger Torque High Torque Earth Drills for 21–50 Tonne Excavators","description":"\u003cp\u003e\u003cstrong\u003eAuger Torque high torque earth drills\u003c\/strong\u003e are the heaviest drives in the range, for 21 to 50 tonne excavators. The 70,000 MAX and 80,000 MAX deliver up to 80,898Nm, and the 100,000 MAX and 150,000 MAX up to 152,319Nm, for large diameter and deep drilling, foundation piles, pole and mast installations, core barrel drilling and large screw piles.\u003c\/p\u003e\n\u003cp\u003eEach drive uses an axial piston motor and Auger Torque's planetary gearbox, with a single-piece non-dislodgement shaft that carries a lifetime warranty. The 70,000 and 80,000 MAX have a 130mm square output shaft, with 130mm hex as an option, and the 100,000 and 150,000 MAX have a 150mm hex shaft.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e70,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e38,016–71,280Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–300 bar\u003c\/td\u003e\n\u003ctd\u003e7–19 rpm\u003c\/td\u003e\n\u003ctd\u003e750kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e46,227–80,898Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–280 bar\u003c\/td\u003e\n\u003ctd\u003e9–15 rpm\u003c\/td\u003e\n\u003ctd\u003e760kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e45,746–100,069Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–350 bar\u003c\/td\u003e\n\u003ctd\u003e5–15 rpm\u003c\/td\u003e\n\u003ctd\u003e1,061kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e71,680–152,319Nm\u003c\/td\u003e\n\u003ctd\u003e100–340 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–340 bar\u003c\/td\u003e\n\u003ctd\u003e4–12 rpm\u003c\/td\u003e\n\u003ctd\u003e1,491kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e130mm square or hex (70,000 and 80,000 MAX), 150mm hex (100,000 and 150,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003ePA augers from 300mm to 2.4m on the 70,000 and 80,000 MAX; ask us for the 100,000 and 150,000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin cradle (double pin hitch also available on the 70,000 and 80,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize (height x diameter)\u003c\/th\u003e\n\u003ctd\u003e1625 x 524mm (70,000 and 80,000 MAX), 1623 x 636mm (100,000 MAX), 1863 x 766mm (150,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase drain line\u003c\/th\u003e\n\u003ctd\u003eRequired on the 70,000 and 80,000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptions\u003c\/th\u003e\n\u003ctd\u003e2-way valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 152,319Nm of torque\u003c\/li\u003e\n\u003cli\u003eAxial piston motor and planetary gearbox\u003c\/li\u003e\n\u003cli\u003e130mm or 150mm drive shafts\u003c\/li\u003e\n\u003cli\u003eSingle-piece non-dislodgement shaft with a lifetime warranty\u003c\/li\u003e\n\u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than its leading competitors'\u003c\/li\u003e\n\u003cli\u003eWorks with Auger Torque alignment monitors (100,000 and 150,000 MAX)\u003c\/li\u003e\n\u003cli\u003eOptional 2-way valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eCheck your excavator's auxiliary flow and pressure against the table. These drives need a two-way circuit, or the optional 2-way valve on a single-acting hammer circuit, and the 70,000 and 80,000 MAX need a case drain line.\u003c\/p\u003e\n\u003cp\u003eSend us your excavator make, model and weight, and tell us about the job: the hole diameter and depth, the ground, and whether you're drilling, coring or installing screw piles. We'll quote the drive, hitch and augers together, and our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e compares the whole range. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e to get started.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eFor less demanding work on 20 to 45 tonne excavators, see the \u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 35,000–65,000 MAX earth drills\u003c\/a\u003e. For the augers, see the \u003ca href=\"\/products\/auger-torque-pa-auger\"\u003eAuger Torque PA augers\u003c\/a\u003e and the \u003ca href=\"\/products\/auger-torque-hard-rock-auger\"\u003eAuger Torque hard rock auger\u003c\/a\u003e, or browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66281687253341,"sku":"AT-HIGH-TORQUE-DRILLS","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/21-45T-e1746541430176.png?v=1792596050"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/collections\/augertorque-3500-max-earth-drill-2-5-ton-826-p.png?v=1790926825","url":"https:\/\/mammothattachments.com\/collections\/excavator-auger-drives.oembed","provider":"Mammoth Attachments","version":"1.0","type":"link"}