{"title":"Excavator Augers","description":"\u003cp\u003e\u003cstrong\u003eExcavator augers\u003c\/strong\u003e drill post holes, pile holes and tree pits with the excavator you already have. We supply the Auger Torque range: hydraulic earth drills for 0.75 to 50 tonne excavators, augers from 100mm to 2.4m across, and hitches made to fit your machine.\u003c\/p\u003e\n\n\u003cp\u003eA working setup has three parts: the earth drill, a hitch to mount it on your dipper and an auger in the diameter you need. Match them to your excavator here:\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eEarth drill\u003c\/th\u003e\n\u003cth\u003eAuger and hole sizes\u003c\/th\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e0.75–1 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-1200-earth-drill\"\u003eAuger Torque 1200\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2\u003c\/a\u003e, 100–300mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-1200-single-pin-hitch\"\u003e1200 single pin hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eAuger Torque X1500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4\u003c\/a\u003e, 100–400mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e1–2.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eAuger Torque X2000\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4\u003c\/a\u003e, 100–450mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e1.5–3 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eAuger Torque X2500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4\u003c\/a\u003e, 100–500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2–4 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003eAuger Torque 3000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4\u003c\/a\u003e, 100–600mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2.5–4.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003eAuger Torque 3500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4\u003c\/a\u003e, 100–750mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e3–5 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003eAuger Torque 4500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4\u003c\/a\u003e, 100–900mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4.5–6 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003eAuger Torque 5500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5\u003c\/a\u003e, 150–750mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e5–7 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003eAuger Torque 7000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5\u003c\/a\u003e, 150–900mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e6–8 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003eAuger Torque 8000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5\u003c\/a\u003e, 150–1,000mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e8–13 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003eAuger Torque 12000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6\u003c\/a\u003e, 150–1,000mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003e12000–15000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003eAuger Torque 15000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6\u003c\/a\u003e, 150–1,200mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003e12000–15000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e13–20 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003eAuger Torque 20000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6\u003c\/a\u003e, 150–1,000mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003e20000–25000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e15–22 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-25000-max-earth-drill\"\u003eAuger Torque 25000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6\u003c\/a\u003e, 150–1,500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003e20000–25000 MAX hitch\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 35,000–65,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-pa-auger\"\u003ePA\u003c\/a\u003e, 300–2,400mm\u003c\/td\u003e\n\u003ctd\u003eSingle pin or double pin cradle, quoted with the drive\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque 70,000–150,000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/auger-torque-pa-auger\"\u003ePA\u003c\/a\u003e, quoted to suit\u003c\/td\u003e\n\u003ctd\u003eDouble pin cradle, quoted with the drive\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eNot sure which you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e explains how to match an earth drill to your machine's weight and hydraulics, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll recommend a setup.\u003c\/p\u003e\n\n\u003cp\u003eDrilling hard or fractured rock? See the \u003ca href=\"\/products\/auger-torque-hard-rock-auger\"\u003eAuger Torque hard rock auger\u003c\/a\u003e for 10 to 50 tonne excavators. Drilling with a different machine? See the Auger Torque \u003ca href=\"\/products\/auger-torque-telehandler-auger\"\u003etelehandler auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-backhoe-auger\"\u003ebackhoe auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-skid-steer-auger\"\u003eskid steer auger\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-truck-crane-auger\"\u003etruck crane auger\u003c\/a\u003e. For deeper holes and spares, see \u003ca href=\"\/products\/auger-torque-auger-extensions\"\u003eauger extensions\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-auger-teeth-and-pilots\"\u003eauger teeth and pilots\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eShop by type: \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eauger drives\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eauger bits\u003c\/a\u003e, \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger hitches\u003c\/a\u003e and \u003ca href=\"\/collections\/auger-drive-attachments\"\u003eauger drive attachments\u003c\/a\u003e, or see our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e for 0.75 to 5 tonne machines. For everything else, browse all our \u003ca href=\"\/pages\/excavator-attachments\"\u003eexcavator attachments\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"auger-torque-1200-earth-drill","title":"Auger Torque 1200 Earth Drill for 0.75–1 Tonne Micro Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 1200 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 0.75–1 tonne micro excavators. It turns an auger with up to 1,164Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 300mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 15–32 l\/min of oil at 30–185 bar from your excavator's auxiliary circuit, and its 50mm round output shaft takes Auger Torque S2 augers. It's supplied with hoses and adaptors. Tell us your coupler type and size when you order.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-1200-single-pin-hitch\"\u003e1200 single pin hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e in the diameter you need, up to 300mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 1,164Nm of torque at 185 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 0.75–1 tonne micro excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 300mm across with S2 augers\u003c\/li\u003e\n  \u003cli\u003e50mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency planetary gearbox\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1200 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 1200\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-1010201000R2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e0.75–1 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e189–1,164Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e30–185 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e15–32 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e50mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S2 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eSingle pin hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 1200 needs a two-way auxiliary circuit that can supply 15–32 l\/min at up to 185 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003ePin diameter and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1200 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 1200 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 0.75–1 tonne micro excavators. Your machine's auxiliary circuit also needs to supply 15–32 l\/min at 30–185 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 300mm across with Auger Torque S2 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-1200-single-pin-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 15–32 l\/min at 30–185 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S2 augers with a 50mm round hub. See the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eX1500 earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104702927197,"sku":"21-1010201000R2000","price":1372.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-1200-earth-drill.png?v=1790925362"},{"product_id":"auger-torque-x1500-earth-drill","title":"Auger Torque X1500 Earth Drill for 1–2 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X1500 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 1–2 tonne mini diggers. It turns an auger with up to 1,496Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 400mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 20–45 l\/min of oil at 70–205 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 400mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 1,496Nm of torque at 205 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 1–2 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 400mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eX1500 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X1500\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2000501000R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e511–1,496Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e70–205 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e20–45 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e46kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e585mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe X1500 needs a two-way auxiliary circuit that can supply 20–45 l\/min at up to 205 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003eX1500 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the X1500 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 1–2 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 20–45 l\/min at 70–205 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 400mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 20–45 l\/min at 70–205 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-1200-earth-drill\"\u003e1200 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eX2000 earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104702959965,"sku":"21-2000501000R1000","price":1689.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x1500-earth-drill.png?v=1790925363"},{"product_id":"auger-torque-x2000-earth-drill","title":"Auger Torque X2000 Earth Drill for 1–2.5 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X2000 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 1–2.5 tonne mini diggers. It turns an auger with up to 2,190Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 450mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 25–57 l\/min of oil at 70–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 450mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 2,190Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 1–2.5 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 450mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eX2000 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2010501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e639–2,190Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e70–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e25–57 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e47kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e585mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe X2000 needs a two-way auxiliary circuit that can supply 25–57 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003eX2000 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the X2000 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 1–2.5 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 25–57 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 450mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 25–57 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eX1500 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eX2500 earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104702992733,"sku":"21-2010501100R1000","price":1815.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x2000-earth-drill.jpg?v=1790925363"},{"product_id":"auger-torque-x2500-earth-drill","title":"Auger Torque X2500 Earth Drill for 1.5–3 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X2500 earth drill\u003c\/strong\u003e is a hydraulic auger drive for 1.5–3 tonne mini diggers. It turns an auger with up to 2,847Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 500mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 27–65 l\/min of oil at 70–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003eX1500–X2500 hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 500mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 2,847Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 1.5–3 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 500mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003ePatented non-dislodgement shaft: a one-piece shaft assembled from the top down and locked into the gearbox housing, so it can't drop out\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eX2500 Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X2500\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1.5–3 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e830–2,847Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e70–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e27–65 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e48kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e585mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe X2500 needs a two-way auxiliary circuit that can supply 27–65 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003eX2500 Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the X2500 suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 1.5–3 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 27–65 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 500mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-x1500-x2500-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 27–65 l\/min at 70–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eX2000 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003e3000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104710496605,"sku":null,"price":1949.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x2500-earth-drill.webp?v=1790925449"},{"product_id":"auger-torque-3000-max-earth-drill","title":"Auger Torque 3000 MAX Earth Drill for 2–4 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 3000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 2–4 tonne mini diggers. It turns an auger with up to 2,877Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 600mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 27–75 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 600mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 2,877Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 2–4 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 600mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 3000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2320501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–4 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e959–2,877Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e27–75 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e71kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e665mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 3000 MAX needs a two-way auxiliary circuit that can supply 27–75 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e3000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 3000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 2–4 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 27–75 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 600mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 27–75 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eX2500 earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003e3500 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104710529373,"sku":"21-2320501100R1000","price":2194.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-3000-max-earth-drill.jpg?v=1790925449"},{"product_id":"auger-torque-3500-max-earth-drill","title":"Auger Torque 3500 MAX Earth Drill for 2.5–4.5 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 3500 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 2.5–4.5 tonne mini diggers. It turns an auger with up to 3,614Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 750mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 40–85 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 750mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 3,614Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 2.5–4.5 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 750mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3500 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 3500 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-2330501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2.5–4.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e1,205–3,614Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e40–85 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e73kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e665mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 3500 MAX needs a two-way auxiliary circuit that can supply 40–85 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e3500 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 3500 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 2.5–4.5 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 40–85 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 750mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 40–85 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003e3000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003e4500 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104710824285,"sku":"21-2330501100R1000","price":2321.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-3500-max-earth-drill.png?v=1790925451"},{"product_id":"auger-torque-4500-max-earth-drill","title":"Auger Torque 4500 MAX Earth Drill for 3–5 Tonne Mini Diggers","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 4500 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 3–5 tonne mini diggers. It turns an auger with up to 4,499Nm of torque to drill post holes, tree pits and foundation holes from 100mm to 900mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 50–95 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 65mm round output shaft takes Auger Torque S4 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003e3000–4500 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e in the diameter you need, up to 900mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 4,499Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 3–5 tonne mini diggers\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 100mm to 900mm across with S4 augers\u003c\/li\u003e\n  \u003cli\u003e65mm round output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4500 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 4500 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3350501100R1000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e3–5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e1,500–4,499Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e50–95 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e100–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e75kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e665mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFence posts and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree and hedge planting\u003c\/li\u003e\n  \u003cli\u003eFootings for decking, sheds and garden buildings\u003c\/li\u003e\n  \u003cli\u003eSign posts and small foundations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 4500 MAX needs a two-way auxiliary circuit that can supply 50–95 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4500 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 4500 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 3–5 tonne mini diggers. Your machine's auxiliary circuit also needs to supply 50–95 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 100mm to 900mm across with Auger Torque S4 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-3000-4500-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 50–95 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S4 augers with a 65mm round hub. See the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003e3500 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003e5500 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or see all our \u003ca href=\"\/collections\/mini-digger-augers\"\u003emini digger augers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104735891805,"sku":"21-3350501100R1000","price":2454.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-4500-max-earth-drill.png?v=1790925534"},{"product_id":"auger-torque-5500-max-earth-drill","title":"Auger Torque 5500 MAX Earth Drill for 4.5–6 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 5500 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 4.5–6 tonne excavators. It turns an auger with up to 5,477Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 750mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 40–115 l\/min of oil at 80–260 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S5 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e in the diameter you need, up to 750mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 5,477Nm of torque at 260 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 4.5–6 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 750mm across with S5 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e5500 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 5500 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3432201200S2000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4.5–6 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e1,685–5,477Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e40–115 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e108kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e780mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFencing and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree planting\u003c\/li\u003e\n  \u003cli\u003eFoundation and pile holes\u003c\/li\u003e\n  \u003cli\u003eLighting columns and sign posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 5500 MAX needs a two-way auxiliary circuit that can supply 40–115 l\/min at up to 260 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e5500 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 5500 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 4.5–6 tonne excavators. Your machine's auxiliary circuit also needs to supply 40–115 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 750mm across with Auger Torque S5 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 40–115 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S5 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003e4500 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003e7000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104736022877,"sku":"21-3432201200S2000","price":3121.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-5500-max-earth-drill.png?v=1790925535"},{"product_id":"auger-torque-7000-max-earth-drill","title":"Auger Torque 7000 MAX Earth Drill for 5–7 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 7000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 5–7 tonne excavators. It turns an auger with up to 6,931Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 900mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 60–135 l\/min of oil at 80–260 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S5 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e in the diameter you need, up to 900mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 6,931Nm of torque at 260 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 5–7 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 900mm across with S5 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e7000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 7000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3542201300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e5–7 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e2,133–6,931Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e60–135 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e112kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e780mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFencing and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree planting\u003c\/li\u003e\n  \u003cli\u003eFoundation and pile holes\u003c\/li\u003e\n  \u003cli\u003eLighting columns and sign posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 7000 MAX needs a two-way auxiliary circuit that can supply 60–135 l\/min at up to 260 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e7000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 7000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 5–7 tonne excavators. Your machine's auxiliary circuit also needs to supply 60–135 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 900mm across with Auger Torque S5 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 60–135 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S5 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003e5500 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003e8000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104736121181,"sku":"21-3542201300S2600","price":4002.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-7000-max-earth-drill.png?v=1790925536"},{"product_id":"auger-torque-8000-max-earth-drill","title":"Auger Torque 8000 MAX Earth Drill for 6–8 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 8000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 6–8 tonne excavators. It turns an auger with up to 8,152Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,200mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 70–150 l\/min of oil at 80–260 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S5 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003e5500–8000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e in the diameter you need. This drive can turn up to 1,200mm, and the S5 augers we supply go up to 1,000mm; ask us if you need a bigger hole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 8,152Nm of torque at 260 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 6–8 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,200mm across with S5 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e8000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 8000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-3552201300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–8 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e2,717–8,152Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–260 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e70–150 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e116kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e780mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFencing and gate posts\u003c\/li\u003e\n  \u003cli\u003eTree planting\u003c\/li\u003e\n  \u003cli\u003eFoundation and pile holes\u003c\/li\u003e\n  \u003cli\u003eLighting columns and sign posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 8000 MAX needs a two-way auxiliary circuit that can supply 70–150 l\/min at up to 260 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e8000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 8000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 6–8 tonne excavators. Your machine's auxiliary circuit also needs to supply 70–150 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,200mm across with Auger Torque S5 augers, depending on the ground. The S5 augers we supply go up to 1,000mm.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-5500-8000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 70–150 l\/min at 80–260 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S5 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003e7000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003e12000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104803819869,"sku":"21-3552201300S2600","price":4230.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-8000-max-earth-drill.png?v=1790925631"},{"product_id":"auger-torque-12000-max-earth-drill","title":"Auger Torque 12000 MAX Earth Drill for 8–13 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 12000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 8–13 tonne excavators. It turns an auger with up to 11,995Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,000mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003e12000–15000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,000mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 11,995Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 8–13 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,000mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 12000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4072201300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e8–13 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e3,998–11,995Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e172kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e930mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 12000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e12000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 12000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 8–13 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,000mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 80–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003e8000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003e15000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104804442461,"sku":"21-4072201300S2600","price":5334.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-12000-max-earth-drill.png?v=1790925632"},{"product_id":"auger-torque-15000-max-earth-drill","title":"Auger Torque 15000 MAX Earth Drill for 10–15 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 15000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 10–15 tonne excavators. It turns an auger with up to 15,071Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,200mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 80–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hoses and adaptors. Quick release couplers aren't included.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003e12000–15000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,200mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 15,071Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 10–15 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,200mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hoses and adaptors (quick release couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e15000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 15000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4040001300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e5,024–15,071Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e80–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e173kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e930mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHoses and adaptors included; quick release couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 15000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e15000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 15000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 10–15 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 80–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,200mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hoses and adaptors, and you choose the \u003ca href=\"\/products\/auger-torque-12000-15000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 80–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003e12000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003e20000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104805294429,"sku":"21-4040001300S2600","price":5499.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-15000-max-earth-drill.png?v=1790925632"},{"product_id":"auger-torque-20000-max-earth-drill","title":"Auger Torque 20000 MAX Earth Drill for 13–20 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 20000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 13–20 tonne excavators. It turns an auger with up to 19,564Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,000mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 160–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hydraulic hoses. Quick couplers aren't included, and Auger Torque recommends plumbing it in directly for the best flow.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003e20000–25000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,000mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 19,564Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 13–20 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,000mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hydraulic hoses (quick couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e20000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 20000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4530001300S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e13–20 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e13,043–19,564Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e160–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e268kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1,130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHydraulic hoses included; quick couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 20000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Quick couplers aren't included: Auger Torque recommends plumbing it in directly for the best flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e20000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 20000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 13–20 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 160–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,000mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hydraulic hoses, and you choose the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 160–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003e15000 MAX earth drill\u003c\/a\u003e or the \u003ca href=\"\/products\/auger-torque-25000-max-earth-drill\"\u003e25000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104889737565,"sku":"21-4530001300S2600","price":8585.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-20000-max-earth-drill.png?v=1790925846"},{"product_id":"auger-torque-25000-max-earth-drill","title":"Auger Torque 25000 MAX Earth Drill for 15–22 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 25000 MAX earth drill\u003c\/strong\u003e is a hydraulic auger drive for 15–22 tonne excavators. It turns an auger with up to 24,755Nm of torque to drill post holes, tree pits and foundation holes from 150mm to 1,500mm across.\u003c\/p\u003e\n\n\u003cp\u003eIt runs on 80–170 l\/min of oil at 160–240 bar from your excavator's auxiliary circuit, and its 75mm square output shaft takes Auger Torque S6 augers. It's supplied with hydraulic hoses. Quick couplers aren't included, and Auger Torque recommends plumbing it in directly for the best flow.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You Need to Start Drilling\u003c\/h2\u003e\n\n\u003cp\u003eThe earth drill is the hydraulic drive unit that turns the auger. To start drilling you'll also need:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eA hitch to mount it on your excavator: the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003e20000–25000 MAX hitch\u003c\/a\u003e, made to fit your machine's pins and dipper.\u003c\/li\u003e\n  \u003cli\u003eAn auger: the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e in the diameter you need, up to 1,500mm with this drive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUp to 24,755Nm of torque at 240 bar\u003c\/li\u003e\n  \u003cli\u003eRecommended for 15–22 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eDrills holes from 150mm to 1,500mm across with S6 augers\u003c\/li\u003e\n  \u003cli\u003e75mm square output shaft\u003c\/li\u003e\n  \u003cli\u003eEpicyclic (planetary) gearbox to multiply the motor's torque\u003c\/li\u003e\n  \u003cli\u003eHigh-quality hydraulic motor\u003c\/li\u003e\n  \u003cli\u003eNon-dislodgement shaft: a one-piece shaft that can't drop out of the drive\u003c\/li\u003e\n  \u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n  \u003cli\u003eForged hood ears for extra strength where the hood takes the most strain\u003c\/li\u003e\n  \u003cli\u003eSupplied with hydraulic hoses (quick couplers not included)\u003c\/li\u003e\n  \u003cli\u003eOptional 2-way valve to run it from a single-acting hammer circuit, and an optional pressure relief valve to protect the motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e25000 MAX Earth Drill Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 25000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e21-4540000500S2600\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e15–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003ctd\u003e16,503–24,755Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003ctd\u003e160–240 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003ctd\u003e80–170 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended hole diameter\u003c\/th\u003e\n\u003ctd\u003e150–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6 series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin or double pin cradle hitch (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e269kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1,130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHoses\u003c\/th\u003e\n\u003ctd\u003eHydraulic hoses included; quick couplers not included\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePile holes and foundations\u003c\/li\u003e\n  \u003cli\u003eLarge tree planting\u003c\/li\u003e\n  \u003cli\u003eLighting columns, gantries and large posts\u003c\/li\u003e\n  \u003cli\u003eCivil engineering and groundworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe 25000 MAX needs a two-way auxiliary circuit that can supply 80–170 l\/min at up to 240 bar. Oil flow sets how fast the auger turns and pressure sets the torque, so a machine at the low end of the range will drill more slowly. The circuit needs to run both ways so you can reverse the auger to free it. If your excavator only has a single-acting hammer circuit, the optional 2-way valve converts it to two-way flow. Quick couplers aren't included: Auger Torque recommends plumbing it in directly for the best flow. Check your machine's auxiliary flow and pressure before you order, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll check them for you.\u003c\/p\u003e\n\n\u003ch2\u003eFitting It to Your Excavator\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class use different pins, dippers and quick hitches, so the hitch is made to measure. When you order, send us:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eYour excavator make, model and operating weight\u003c\/li\u003e\n  \u003cli\u003eFront and rear pin diameters, pin centres and dipper width\u003c\/li\u003e\n  \u003cli\u003eYour quick hitch make and model, if you use one\u003c\/li\u003e\n  \u003cli\u003eYour auxiliary circuit's flow and pressure, if you know them\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, and they're the same for an auger hitch.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eWe confirm the earth drill, hitch and hydraulics suit your machine before anything is supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e25000 MAX Earth Drill FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat size excavator does the 25000 MAX suit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque recommends it for 15–22 tonne excavators. Your machine's auxiliary circuit also needs to supply 80–170 l\/min at 160–240 bar.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size holes can it drill?\u003c\/h3\u003e\n\u003cp\u003eFrom 150mm to 1,500mm across with Auger Torque S6 augers, depending on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it come with a hitch and auger?\u003c\/h3\u003e\n\u003cp\u003eNo. It comes with hydraulic hoses, and you choose the \u003ca href=\"\/products\/auger-torque-20000-25000-max-hitch\"\u003ehitch\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e separately, so you get the right pin size and hole diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA two-way auxiliary circuit that supplies 80–170 l\/min at 160–240 bar. A single-acting hammer circuit can be converted with the optional 2-way valve.\u003c\/p\u003e\n\n\u003ch3\u003eWhich augers fit it?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque S6 augers with a 75mm square hub. See the \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e for diameters and teeth.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003e20000 MAX earth drill\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which size you need? Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e matches earth drills, augers and hitches to excavator weight and hydraulics.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66104890032477,"sku":"21-4540000500S2600","price":8911.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-25000-max-earth-drill.png?v=1790925847"},{"product_id":"auger-torque-s2-auger","title":"Auger Torque S2 Auger for Micro Diggers – 100mm to 350mm","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque S2 auger\u003c\/strong\u003e is a 900mm-long auger with a 50mm round hub for the 1200 earth drill, on micro excavators from 0.75 to 1 tonne. Choose a diameter from 100mm to 350mm with earth or tungsten teeth.\u003c\/p\u003e\n\n\u003cp\u003eIt's built for soft soils and clay through to mixed and moderately rocky ground, and even frozen ground, with shallow pitch flights, the Shock Lock tooth locking system and a heavy-duty tube.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Earth Drills Does It Fit?\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eEarth drill\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eHole sizes with this auger\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-1200-earth-drill\"\u003eAuger Torque 1200\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75–1 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eEarth or Tungsten Teeth?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEarth teeth:\u003c\/strong\u003e for clay, topsoil and mixed ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTungsten teeth:\u003c\/strong\u003e for harder, abrasive and stony ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e50mm round hub to fit the Auger Torque 1200 earth drill\u003c\/li\u003e\n  \u003cli\u003e900mm long\u003c\/li\u003e\n  \u003cli\u003eDiameters from 100mm to 350mm\u003c\/li\u003e\n  \u003cli\u003eEarth or tungsten teeth\u003c\/li\u003e\n  \u003cli\u003eShallow pitch flights\u003c\/li\u003e\n  \u003cli\u003eShock Lock tooth locking system\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty tube construction and a precision constant spiral cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eS2 Auger Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003e50mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameters\u003c\/th\u003e\n\u003ctd\u003e100, 150, 200, 250, 300, 350mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTeeth\u003c\/th\u003e\n\u003ctd\u003eEarth or tungsten\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 1200 earth drill\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003eMicro excavators from 0.75 to 1 tonne\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing a Diameter\u003c\/h2\u003e\n\n\u003cp\u003eChoose the hole size the job needs, within your earth drill's recommended range in the table above. A wider auger needs more torque, so a bigger hole takes a bigger drive. The auger is 900mm long, which sets how deep you can drill in one go.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eDelivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eS2 Auger FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does the S2 auger fit?\u003c\/h3\u003e\n\u003cp\u003eThe Auger Torque 1200 earth drill, which has a 50mm round output shaft.\u003c\/p\u003e\n\n\u003ch3\u003eEarth or tungsten teeth?\u003c\/h3\u003e\n\u003cp\u003eEarth teeth suit clay, topsoil and mixed ground. Tungsten teeth last longer in harder, abrasive and stony ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat diameter can my earth drill turn?\u003c\/h3\u003e\n\u003cp\u003eThe 1200 earth drill is recommended for holes up to 300mm. Bigger holes need more torque, so stay within that range.\u003c\/p\u003e\n\n\u003ch3\u003eHow deep can it drill?\u003c\/h3\u003e\n\u003cp\u003eThe S2 auger is 900mm long, which sets how deep you can drill in one go. Ask us if you need to go deeper.\u003c\/p\u003e\n\n\u003ch2\u003eOther Augers\u003c\/h2\u003e\n\n\u003cp\u003eFor other earth drills, see the \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e, or compare them all in our \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eexcavator auger bits\u003c\/a\u003e. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e explains how to match an auger to your drive and the ground.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Earth \/ 100mm","offer_id":66104932696413,"sku":"30-20101100","price":269.56,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 150mm","offer_id":66104932729181,"sku":"30-20151100","price":305.12,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 200mm","offer_id":66104932761949,"sku":"30-20201100","price":320.1,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 250mm","offer_id":66104932794717,"sku":"30-20251100","price":366.9,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 300mm","offer_id":66104932827485,"sku":"30-20301100","price":385.62,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 350mm","offer_id":66104932860253,"sku":"30-20351100","price":440.92,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 100mm","offer_id":66104932893021,"sku":"30-20105100","price":293.89,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 150mm","offer_id":66104932925789,"sku":"30-20155100","price":340.69,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 200mm","offer_id":66104932958557,"sku":"30-20205100","price":357.54,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 250mm","offer_id":66104932991325,"sku":"30-20255100","price":409.96,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 300mm","offer_id":66104933024093,"sku":"30-20305100","price":436.16,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 350mm","offer_id":66104933056861,"sku":"30-20355100","price":512.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-s2-auger.png?v=1790925976"},{"product_id":"auger-torque-s4-auger","title":"Auger Torque S4 Auger for Mini Diggers – 100mm to 900mm","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque S4 auger\u003c\/strong\u003e is a 1,200mm-long auger with a 65mm round hub for X1500, X2000, X2500, 3000 MAX, 3500 MAX and 4500 MAX earth drills, on mini diggers from 1 to 5 tonnes. Choose a diameter from 100mm to 900mm with earth or tungsten teeth.\u003c\/p\u003e\n\n\u003cp\u003eIt's built for soft soils, clay and mixed ground, through to rocky or frozen conditions, with shallow pitch flights, the Shock Lock tooth locking system and a heavy-duty tube.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Earth Drills Does It Fit?\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eEarth drill\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eHole sizes with this auger\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eAuger Torque X1500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eAuger Torque X2000\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eAuger Torque X2500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5–3 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003eAuger Torque 3000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2–4 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003eAuger Torque 3500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5–4.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003eAuger Torque 4500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e3–5 tonnes\u003c\/td\u003e\n\u003ctd\u003e100–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eEarth or Tungsten Teeth?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEarth teeth:\u003c\/strong\u003e for clay, topsoil and mixed ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTungsten teeth:\u003c\/strong\u003e for harder, abrasive and stony ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e65mm round hub to fit Auger Torque X1500, X2000, X2500, 3000 MAX, 3500 MAX and 4500 MAX earth drills\u003c\/li\u003e\n  \u003cli\u003e1,200mm long\u003c\/li\u003e\n  \u003cli\u003eDiameters from 100mm to 900mm\u003c\/li\u003e\n  \u003cli\u003eEarth or tungsten teeth\u003c\/li\u003e\n  \u003cli\u003eShallow pitch flights\u003c\/li\u003e\n  \u003cli\u003eShock Lock tooth locking system\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty tube construction and a precision constant spiral cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eS4 Auger Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003e65mm round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameters\u003c\/th\u003e\n\u003ctd\u003e100, 150, 200, 225, 250, 300, 350, 400, 450, 500, 600, 750, 800, 900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTeeth\u003c\/th\u003e\n\u003ctd\u003eEarth or tungsten\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X1500, X2000, X2500, 3000 MAX, 3500 MAX and 4500 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003eMini diggers from 1 to 5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing a Diameter\u003c\/h2\u003e\n\n\u003cp\u003eChoose the hole size the job needs, within your earth drill's recommended range in the table above. A wider auger needs more torque, so a bigger hole takes a bigger drive. The auger is 1,200mm long, which sets how deep you can drill in one go.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eDelivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eS4 Auger FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does the S4 auger fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque X1500, X2000, X2500, 3000 MAX, 3500 MAX and 4500 MAX earth drills, which have a 65mm round output shaft.\u003c\/p\u003e\n\n\u003ch3\u003eEarth or tungsten teeth?\u003c\/h3\u003e\n\u003cp\u003eEarth teeth suit clay, topsoil and mixed ground. Tungsten teeth last longer in harder, abrasive and stony ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat diameter can my earth drill turn?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the drive: the X1500 up to 400mm; the X2000 up to 450mm; the X2500 up to 500mm; the 3000 MAX up to 600mm; the 3500 MAX up to 750mm; the 4500 MAX up to 900mm. Bigger holes need more torque, so stay within your drive's range.\u003c\/p\u003e\n\n\u003ch3\u003eHow deep can it drill?\u003c\/h3\u003e\n\u003cp\u003eThe S4 auger is 1,200mm long, which sets how deep you can drill in one go. Ask us if you need to go deeper.\u003c\/p\u003e\n\n\u003ch2\u003eOther Augers\u003c\/h2\u003e\n\n\u003cp\u003eFor other earth drills, see the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e, or compare them all in our \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eexcavator auger bits\u003c\/a\u003e. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e explains how to match an auger to your drive and the ground.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Earth \/ 100mm","offer_id":66104933253469,"sku":"30-40101200","price":283.43,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 150mm","offer_id":66104933286237,"sku":"30-40151200","price":348.98,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 200mm","offer_id":66104933319005,"sku":"30-40201200","price":399.12,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 225mm","offer_id":66104933351773,"sku":"30-40231200","price":416.47,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 250mm","offer_id":66104933384541,"sku":"30-40251200","price":429.96,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 300mm","offer_id":66104933417309,"sku":"30-40301200","price":445.39,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 350mm","offer_id":66104933450077,"sku":"30-40351200","price":487.81,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 400mm","offer_id":66104933482845,"sku":"30-40401200","price":532.15,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 450mm","offer_id":66104933515613,"sku":"30-40451200","price":611.21,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 500mm","offer_id":66104933548381,"sku":"30-40501200","price":661.33,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 600mm","offer_id":66104933581149,"sku":"30-40601200","price":773.16,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 750mm","offer_id":66104933613917,"sku":"30-40751200","price":987.18,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 800mm","offer_id":66104933646685,"sku":"30-40801200","price":1077.8,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 900mm","offer_id":66104933679453,"sku":"30-40901200","price":1197.35,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 100mm","offer_id":66104933712221,"sku":"30-40105200","price":337.42,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 150mm","offer_id":66104933744989,"sku":"30-40155200","price":437.68,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 200mm","offer_id":66104933777757,"sku":"30-40205200","price":487.81,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 225mm","offer_id":66104933810525,"sku":"30-40235200","price":505.16,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 250mm","offer_id":66104933843293,"sku":"30-40255200","price":534.08,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 300mm","offer_id":66104933876061,"sku":"30-40305200","price":568.79,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 350mm","offer_id":66104933908829,"sku":"30-40355200","price":609.28,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 400mm","offer_id":66104933941597,"sku":"30-40405200","price":672.9,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 450mm","offer_id":66104933974365,"sku":"30-40455200","price":767.38,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 500mm","offer_id":66104934007133,"sku":"30-40505200","price":817.51,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 600mm","offer_id":66104934039901,"sku":"30-40605200","price":964.04,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 750mm","offer_id":66104934072669,"sku":"30-40755200","price":1195.42,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 800mm","offer_id":66104934105437,"sku":"30-40805200","price":1303.39,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 900mm","offer_id":66104934138205,"sku":"30-40905200","price":1422.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-s4-auger.png?v=1790925976"},{"product_id":"auger-torque-s5-auger","title":"Auger Torque S5 Auger for 4.5–8 Tonne Excavators – 150mm to 1,000mm","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque S5 auger\u003c\/strong\u003e is a 1,500mm-long auger with a 75mm square hub for 5500 MAX, 7000 MAX and 8000 MAX earth drills, on excavators up to 8 tonnes. Choose a diameter from 150mm to 1,000mm with earth, tungsten or rock teeth.\u003c\/p\u003e\n\n\u003cp\u003eIt's built for soft ground and clay through to mixed and rocky ground, and even permafrost, with shallow pitch flights, the Shock Lock tooth locking system and a heavy-duty tube.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Earth Drills Does It Fit?\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eEarth drill\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eHole sizes with this auger\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003eAuger Torque 5500 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5–6 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003eAuger Torque 7000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e5–7 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003eAuger Torque 8000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6–8 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eEarth, Tungsten or Rock Teeth?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEarth teeth:\u003c\/strong\u003e for clay, topsoil and mixed ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTungsten teeth:\u003c\/strong\u003e for harder, abrasive and stony ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRock teeth:\u003c\/strong\u003e for very hard and fractured rock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e75mm square hub to fit Auger Torque 5500 MAX, 7000 MAX and 8000 MAX earth drills\u003c\/li\u003e\n  \u003cli\u003e1,500mm long\u003c\/li\u003e\n  \u003cli\u003eDiameters from 150mm to 1,000mm\u003c\/li\u003e\n  \u003cli\u003eEarth, tungsten or rock teeth\u003c\/li\u003e\n  \u003cli\u003eShallow pitch flights\u003c\/li\u003e\n  \u003cli\u003eShock Lock tooth locking system (not on rock augers)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty tube construction and a precision constant spiral cut\u003c\/li\u003e\n  \u003cli\u003eOptional hard-facing for extra wear resistance (ask us)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eS5 Auger Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameters\u003c\/th\u003e\n\u003ctd\u003e150, 200, 225, 250, 300, 350, 400, 450, 500, 600, 750, 800, 900, 1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTeeth\u003c\/th\u003e\n\u003ctd\u003eEarth, tungsten or rock\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 5500 MAX, 7000 MAX and 8000 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003eExcavators up to 8 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing a Diameter\u003c\/h2\u003e\n\n\u003cp\u003eChoose the hole size the job needs, within your earth drill's recommended range in the table above. A wider auger needs more torque, so a bigger hole takes a bigger drive. The auger is 1,500mm long, which sets how deep you can drill in one go.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eDelivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eS5 Auger FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does the S5 auger fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque 5500 MAX, 7000 MAX and 8000 MAX earth drills, which have a 75mm square output shaft.\u003c\/p\u003e\n\n\u003ch3\u003eEarth, tungsten or rock teeth?\u003c\/h3\u003e\n\u003cp\u003eEarth teeth suit clay, topsoil and mixed ground. Tungsten teeth last longer in harder, abrasive and stony ground. Rock teeth are for very hard and fractured rock.\u003c\/p\u003e\n\n\u003ch3\u003eWhat diameter can my earth drill turn?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the drive: the 5500 MAX up to 750mm; the 7000 MAX up to 900mm; the 8000 MAX up to 1,000mm. Bigger holes need more torque, so stay within your drive's range.\u003c\/p\u003e\n\n\u003ch3\u003eHow deep can it drill?\u003c\/h3\u003e\n\u003cp\u003eThe S5 auger is 1,500mm long, which sets how deep you can drill in one go. Ask us if you need to go deeper.\u003c\/p\u003e\n\n\u003ch2\u003eOther Augers\u003c\/h2\u003e\n\n\u003cp\u003eFor other earth drills, see the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s6-auger\"\u003eS6 auger\u003c\/a\u003e, or compare them all in our \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eexcavator auger bits\u003c\/a\u003e. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e explains how to match an auger to your drive and the ground.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Earth \/ 150mm","offer_id":66104982700381,"sku":"30-50151600","price":551.44,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 200mm","offer_id":66104982733149,"sku":"30-50201600","price":611.21,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 225mm","offer_id":66104982765917,"sku":"30-50231600","price":655.55,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 250mm","offer_id":66104982798685,"sku":"30-50251600","price":707.62,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 300mm","offer_id":66104982831453,"sku":"30-50301600","price":734.6,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 350mm","offer_id":66104982864221,"sku":"30-50351600","price":800.16,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 400mm","offer_id":66104982896989,"sku":"30-50401600","price":865.72,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 450mm","offer_id":66104982929757,"sku":"30-50451600","price":925.49,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 500mm","offer_id":66104982962525,"sku":"30-50501600","price":967.91,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 600mm","offer_id":66104982995293,"sku":"30-50601600","price":1174.21,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 750mm","offer_id":66104983028061,"sku":"30-50751600","price":1367.02,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 800mm","offer_id":66104983060829,"sku":"30-50801600","price":1474.99,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 900mm","offer_id":66104983093597,"sku":"30-50901600","price":1654.31,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 1,000mm","offer_id":66104983126365,"sku":"30-51001600","price":1939.67,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 150mm","offer_id":66104983159133,"sku":"30-50155600","price":636.28,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 200mm","offer_id":66104983191901,"sku":"30-50205600","price":688.33,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 225mm","offer_id":66104983224669,"sku":"30-50235600","price":732.67,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 250mm","offer_id":66104983257437,"sku":"30-50255600","price":800.16,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 300mm","offer_id":66104983290205,"sku":"30-50305600","price":842.58,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 350mm","offer_id":66104983322973,"sku":"30-50355600","price":908.14,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 400mm","offer_id":66104983355741,"sku":"30-50405600","price":989.11,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 450mm","offer_id":66104983388509,"sku":"30-50455600","price":1062.38,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 500mm","offer_id":66104983421277,"sku":"30-50505600","price":1106.72,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 600mm","offer_id":66104983454045,"sku":"30-50605600","price":1341.95,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 750mm","offer_id":66104983486813,"sku":"30-50755600","price":1552.12,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 800mm","offer_id":66104983519581,"sku":"30-50805600","price":1673.58,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 900mm","offer_id":66104983552349,"sku":"30-50905600","price":1852.9,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 1,000mm","offer_id":66104983585117,"sku":"30-51005600","price":2153.68,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 150mm","offer_id":66104983617885,"sku":"30-50156600","price":669.05,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 200mm","offer_id":66104983650653,"sku":"30-50206600","price":703.75,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 225mm","offer_id":66104983683421,"sku":"30-50236600","price":771.24,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 250mm","offer_id":66104983716189,"sku":"30-50256600","price":811.73,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 300mm","offer_id":66104983748957,"sku":"30-50306600","price":850.28,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 350mm","offer_id":66104983781725,"sku":"30-50356600","price":944.77,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 400mm","offer_id":66104983814493,"sku":"30-50406600","price":1019.96,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 450mm","offer_id":66104983847261,"sku":"30-50456600","price":1087.44,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 500mm","offer_id":66104983880029,"sku":"30-50506600","price":1156.86,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 600mm","offer_id":66104983912797,"sku":"30-50606600","price":1386.3,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 750mm","offer_id":66104983945565,"sku":"30-50756600","price":1629.24,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 800mm","offer_id":66104983978333,"sku":"30-50806600","price":1743.0,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 900mm","offer_id":66104984011101,"sku":"30-50906600","price":1982.08,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 1,000mm","offer_id":66104984043869,"sku":"30-51006600","price":2298.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-s5-auger.png?v=1790926046"},{"product_id":"auger-torque-s6-auger","title":"Auger Torque S6 Auger for 8–22 Tonne Excavators – 150mm to 1,500mm","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque S6 auger\u003c\/strong\u003e is a 1,875mm-long auger with a 75mm square hub for 12000 MAX, 15000 MAX, 20000 MAX and 25000 MAX earth drills, on excavators from 8 to 22 tonnes. Choose a diameter from 150mm to 1,500mm with earth, tungsten or rock teeth.\u003c\/p\u003e\n\n\u003cp\u003eIt's built for soft soils and mixed ground through to rocky ground, and even permafrost, with shallow pitch flights, the Shock Lock tooth locking system and a heavy-duty tube.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Earth Drills Does It Fit?\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eEarth drill\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eHole sizes with this auger\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003eAuger Torque 12000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8–13 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003eAuger Torque 15000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–1,200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003eAuger Torque 20000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e13–20 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/auger-torque-25000-max-earth-drill\"\u003eAuger Torque 25000 MAX\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e15–22 tonnes\u003c\/td\u003e\n\u003ctd\u003e150–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eEarth, Tungsten or Rock Teeth?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEarth teeth:\u003c\/strong\u003e for clay, topsoil and mixed ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTungsten teeth:\u003c\/strong\u003e for harder, abrasive and stony ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRock teeth:\u003c\/strong\u003e for very hard and fractured rock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e75mm square hub to fit Auger Torque 12000 MAX, 15000 MAX, 20000 MAX and 25000 MAX earth drills\u003c\/li\u003e\n  \u003cli\u003e1,875mm long\u003c\/li\u003e\n  \u003cli\u003eDiameters from 150mm to 1,500mm\u003c\/li\u003e\n  \u003cli\u003eEarth, tungsten or rock teeth\u003c\/li\u003e\n  \u003cli\u003eShallow pitch flights\u003c\/li\u003e\n  \u003cli\u003eShock Lock tooth locking system\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty tube construction and a precision constant spiral cut\u003c\/li\u003e\n  \u003cli\u003eOptional hard-facing for extra wear resistance (ask us)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eS6 Auger Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAuger Torque S6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003e75mm square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1,875mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDiameters\u003c\/th\u003e\n\u003ctd\u003e150, 200, 225, 250, 300, 350, 400, 450, 500, 600, 750, 800, 900, 1,000, 1,200, 1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTeeth\u003c\/th\u003e\n\u003ctd\u003eEarth, tungsten or rock\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 12000 MAX, 15000 MAX, 20000 MAX and 25000 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003eExcavators from 8 to 22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing a Diameter\u003c\/h2\u003e\n\n\u003cp\u003eChoose the hole size the job needs, within your earth drill's recommended range in the table above. A wider auger needs more torque, so a bigger hole takes a bigger drive. The auger is 1,875mm long, which sets how deep you can drill in one go.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eDelivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eS6 Auger FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does the S6 auger fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque 12000 MAX, 15000 MAX, 20000 MAX and 25000 MAX earth drills, which have a 75mm square output shaft.\u003c\/p\u003e\n\n\u003ch3\u003eEarth, tungsten or rock teeth?\u003c\/h3\u003e\n\u003cp\u003eEarth teeth suit clay, topsoil and mixed ground. Tungsten teeth last longer in harder, abrasive and stony ground. Rock teeth are for very hard and fractured rock.\u003c\/p\u003e\n\n\u003ch3\u003eWhat diameter can my earth drill turn?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the drive: the 12000 MAX up to 1,000mm; the 15000 MAX up to 1,200mm; the 20000 MAX up to 1,000mm; the 25000 MAX up to 1,500mm. Bigger holes need more torque, so stay within your drive's range.\u003c\/p\u003e\n\n\u003ch3\u003eHow deep can it drill?\u003c\/h3\u003e\n\u003cp\u003eThe S6 auger is 1,875mm long, which sets how deep you can drill in one go. Ask us if you need to go deeper.\u003c\/p\u003e\n\n\u003ch2\u003eOther Augers\u003c\/h2\u003e\n\n\u003cp\u003eFor other earth drills, see the \u003ca href=\"\/products\/auger-torque-s2-auger\"\u003eS2 auger\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-s4-auger\"\u003eS4 auger\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-s5-auger\"\u003eS5 auger\u003c\/a\u003e, or compare them all in our \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eexcavator auger bits\u003c\/a\u003e. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e explains how to match an auger to your drive and the ground.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Earth \/ 150mm","offer_id":66105012453725,"sku":"30-60151600","price":827.15,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 200mm","offer_id":66105012486493,"sku":"30-60201600","price":883.07,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 225mm","offer_id":66105012519261,"sku":"30-60231600","price":946.69,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 250mm","offer_id":66105012552029,"sku":"30-60251600","price":983.33,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 300mm","offer_id":66105012584797,"sku":"30-60301600","price":1023.82,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 350mm","offer_id":66105012617565,"sku":"30-60351600","price":1139.51,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 400mm","offer_id":66105012650333,"sku":"30-60401600","price":1253.26,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 450mm","offer_id":66105012683101,"sku":"30-60451600","price":1380.52,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 500mm","offer_id":66105012715869,"sku":"30-60501600","price":1507.76,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 600mm","offer_id":66105012748637,"sku":"30-60601600","price":1721.78,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 750mm","offer_id":66105012781405,"sku":"30-60751600","price":2032.21,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 800mm","offer_id":66105012814173,"sku":"30-60801600","price":2209.6,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 900mm","offer_id":66105012846941,"sku":"30-60901600","price":2533.51,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 1,000mm","offer_id":66105012879709,"sku":"30-61001600","price":2998.19,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 1,200mm","offer_id":66105012912477,"sku":"30-61201600","price":3609.4,"currency_code":"GBP","in_stock":true},{"title":"Earth \/ 1,500mm","offer_id":66105012945245,"sku":"30-61501600","price":5094.02,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 150mm","offer_id":66105012978013,"sku":"30-60155600","price":910.06,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 200mm","offer_id":66105013010781,"sku":"30-60205600","price":960.19,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 225mm","offer_id":66105013043549,"sku":"30-60235600","price":1023.82,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 250mm","offer_id":66105013076317,"sku":"30-60255600","price":1075.87,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 300mm","offer_id":66105013109085,"sku":"30-60305600","price":1129.86,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 350mm","offer_id":66105013141853,"sku":"30-60355600","price":1247.47,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 400mm","offer_id":66105013174621,"sku":"30-60405600","price":1374.73,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 450mm","offer_id":66105013207389,"sku":"30-60455600","price":1519.34,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 500mm","offer_id":66105013240157,"sku":"30-60505600","price":1644.66,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 600mm","offer_id":66105013272925,"sku":"30-60605600","price":1889.53,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 750mm","offer_id":66105013305693,"sku":"30-60755600","price":2215.38,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 800mm","offer_id":66105013338461,"sku":"30-60805600","price":2410.12,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 900mm","offer_id":66105013371229,"sku":"30-60905600","price":2732.11,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 1,000mm","offer_id":66105013403997,"sku":"30-61005600","price":3212.21,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 1,200mm","offer_id":66105013436765,"sku":"30-61205600","price":3885.11,"currency_code":"GBP","in_stock":true},{"title":"Tungsten \/ 1,500mm","offer_id":66105013469533,"sku":"30-61505600","price":5462.29,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 150mm","offer_id":66105013502301,"sku":"30-60156600","price":925.49,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 200mm","offer_id":66105013535069,"sku":"30-60206600","price":992.96,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 225mm","offer_id":66105013567837,"sku":"30-60236600","price":1079.74,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 250mm","offer_id":66105013600605,"sku":"30-60256600","price":1104.79,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 300mm","offer_id":66105013633373,"sku":"30-60306600","price":1158.78,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 350mm","offer_id":66105013666141,"sku":"30-60356600","price":1305.32,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 400mm","offer_id":66105013698909,"sku":"30-60406600","price":1434.5,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 450mm","offer_id":66105013731677,"sku":"30-60456600","price":1573.32,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 500mm","offer_id":66105013764445,"sku":"30-60506600","price":1723.72,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 600mm","offer_id":66105013797213,"sku":"30-60606600","price":1968.59,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 750mm","offer_id":66105013829981,"sku":"30-60756600","price":2331.06,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 800mm","offer_id":66105013862749,"sku":"30-60806600","price":2521.94,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 900mm","offer_id":66105013895517,"sku":"30-60906600","price":2909.5,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 1,000mm","offer_id":66105013928285,"sku":"30-61006600","price":3414.66,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 1,200mm","offer_id":66105013961053,"sku":"30-61206600","price":4108.76,"currency_code":"GBP","in_stock":true},{"title":"Rock \/ 1,500mm","offer_id":66105013993821,"sku":"30-61506600","price":5711.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-s6-auger.png?v=1790926138"},{"product_id":"auger-torque-1200-single-pin-hitch","title":"Auger Torque 1200 Earth Drill Single Pin Hitch","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 1200 single pin hitch\u003c\/strong\u003e mounts an Auger Torque 1200 earth drill on your excavator. It's made to measure for your machine's pins and dipper, so the drive is mounted securely with no universal brackets and no site modifications.\u003c\/p\u003e\n\n\u003cp\u003eIt's a single pin hitch for the 1200, the micro excavator drive for 0.75 to 1 tonne machines, available for 25mm or 30mm pins.\u003c\/p\u003e\n\n\u003ch2\u003eMeasurements We Need\u003c\/h2\u003e\n\n\u003cp\u003eChoose your pin diameter when you order, then send us the rest of your measurements and we'll confirm everything before the hitch is made:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePin diameter\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you use one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take them. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your dipper and pins\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHitch Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 1200 earth drill\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch type\u003c\/th\u003e\n\u003ctd\u003eSingle pin hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePin diameters\u003c\/th\u003e\n\u003ctd\u003e25, 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e0.75–1 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMade to measure\u003c\/th\u003e\n\u003ctd\u003eYes, to your pin diameter and dipper width\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eEach hitch is made to your measurements. Delivery is usually within 7 to 10 working days once we've confirmed them, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHitch FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque \u003ca href=\"\/products\/auger-torque-1200-earth-drill\"\u003e1200\u003c\/a\u003e earth drill.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if my pins are a different size?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us before ordering\u003c\/a\u003e and we'll check what's available for your machine.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hitch included with the earth drill?\u003c\/h3\u003e\n\u003cp\u003eNo. The earth drill and hitch are sold separately, because the hitch is made to fit your excavator.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger drive hitches\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"25mm","offer_id":66105014288733,"sku":"11-302500-1200-KIT","price":198.8,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":66105014321501,"sku":"11-303000-1200-KIT","price":200.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-1200-single-pin-hitch.png?v=1790926139"},{"product_id":"auger-torque-x1500-x2500-hitch","title":"Auger Torque X1500–X2500 Earth Drill Hitch – Double Pin or Cradle","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque X1500–X2500 hitch\u003c\/strong\u003e mounts an Auger Torque X1500, X2000 or X2500 earth drill on your excavator. It's made to measure for your machine's pins and dipper, so the drive is mounted securely with no universal brackets and no site modifications.\u003c\/p\u003e\n\n\u003cp\u003eChoose a standard double pin hitch or a double pin cradle hitch, for pins from 25mm to 40mm, to suit 1–3 tonne excavators.\u003c\/p\u003e\n\n\u003ch2\u003eDouble Pin or Cradle Hitch?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin hitch:\u003c\/strong\u003e a straightforward, rigid mount with minimal movement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin cradle hitch:\u003c\/strong\u003e gives you more control over the auger's position and angle on uneven ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurements We Need\u003c\/h2\u003e\n\n\u003cp\u003eChoose your pin diameter when you order, then send us the rest of your measurements and we'll confirm everything before the hitch is made:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFront and rear pin diameters\u003c\/li\u003e\n  \u003cli\u003ePin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you use one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take them. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your dipper and pins\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHitch Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque X1500, X2000 and X2500 earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch types\u003c\/th\u003e\n\u003ctd\u003eDouble pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePin diameters\u003c\/th\u003e\n\u003ctd\u003e25, 30, 32, 35, 40mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–3 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMade to measure\u003c\/th\u003e\n\u003ctd\u003eYes, to your pin diameters, pin centres and dipper width\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eEach hitch is made to your measurements. Delivery is usually within 7 to 10 working days once we've confirmed them, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHitch FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque \u003ca href=\"\/products\/auger-torque-x1500-earth-drill\"\u003eX1500\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-x2000-earth-drill\"\u003eX2000\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-x2500-earth-drill\"\u003eX2500\u003c\/a\u003e earth drills.\u003c\/p\u003e\n\n\u003ch3\u003eDouble pin or cradle hitch?\u003c\/h3\u003e\n\u003cp\u003eThe double pin hitch is the simpler, more rigid mount. The cradle hitch gives you more control over the auger's position and angle on uneven ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if my pins are a different size?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us before ordering\u003c\/a\u003e and we'll check what's available for your machine.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hitch included with the earth drill?\u003c\/h3\u003e\n\u003cp\u003eNo. The earth drill and hitch are sold separately, because the hitch is made to fit your excavator.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger drive hitches\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Double pin hitch \/ 25mm","offer_id":66105046860125,"sku":"13-302520","price":454.54,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 30mm","offer_id":66105046892893,"sku":"13-303020","price":490.96,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 32mm","offer_id":66105046925661,"sku":"13-303220","price":506.8,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 35mm","offer_id":66105046958429,"sku":"13-303520","price":516.92,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 40mm","offer_id":66105046991197,"sku":"13-304020","price":535.75,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 25mm","offer_id":66105047023965,"sku":"13-302520","price":577.84,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 30mm","offer_id":66105047056733,"sku":"13-303020","price":623.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 32mm","offer_id":66105047089501,"sku":"13-303220","price":629.93,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 35mm","offer_id":66105047122269,"sku":"13-303520","price":645.82,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 40mm","offer_id":66105047155037,"sku":"13-304020","price":668.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-x1500-x2500-hitch.png?v=1790926244"},{"product_id":"auger-torque-3000-4500-max-hitch","title":"Auger Torque 3000–4500 MAX Earth Drill Hitch – Double Pin or Cradle","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 3000–4500 MAX hitch\u003c\/strong\u003e mounts an Auger Torque 3000 MAX, 3500 MAX or 4500 MAX earth drill on your excavator. It's made to measure for your machine's pins and dipper, so the drive is mounted securely with no universal brackets and no site modifications.\u003c\/p\u003e\n\n\u003cp\u003eChoose a standard double pin hitch or a double pin cradle hitch, for pins from 30mm to 60mm, to suit 2–5 tonne excavators.\u003c\/p\u003e\n\n\u003ch2\u003eDouble Pin or Cradle Hitch?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin hitch:\u003c\/strong\u003e a straightforward, rigid mount with minimal movement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin cradle hitch:\u003c\/strong\u003e gives you more control over the auger's position and angle on uneven ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurements We Need\u003c\/h2\u003e\n\n\u003cp\u003eChoose your pin diameter when you order, then send us the rest of your measurements and we'll confirm everything before the hitch is made:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFront and rear pin diameters\u003c\/li\u003e\n  \u003cli\u003ePin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you use one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take them. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your dipper and pins\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHitch Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 3000 MAX, 3500 MAX and 4500 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch types\u003c\/th\u003e\n\u003ctd\u003eDouble pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePin diameters\u003c\/th\u003e\n\u003ctd\u003e30, 32, 35, 38, 40, 44, 45, 50, 55, 60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMade to measure\u003c\/th\u003e\n\u003ctd\u003eYes, to your pin diameters, pin centres and dipper width\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eEach hitch is made to your measurements. Delivery is usually within 7 to 10 working days once we've confirmed them, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHitch FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque \u003ca href=\"\/products\/auger-torque-3000-max-earth-drill\"\u003e3000 MAX\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-3500-max-earth-drill\"\u003e3500 MAX\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-4500-max-earth-drill\"\u003e4500 MAX\u003c\/a\u003e earth drills.\u003c\/p\u003e\n\n\u003ch3\u003eDouble pin or cradle hitch?\u003c\/h3\u003e\n\u003cp\u003eThe double pin hitch is the simpler, more rigid mount. The cradle hitch gives you more control over the auger's position and angle on uneven ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if my pins are a different size?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us before ordering\u003c\/a\u003e and we'll check what's available for your machine.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hitch included with the earth drill?\u003c\/h3\u003e\n\u003cp\u003eNo. The earth drill and hitch are sold separately, because the hitch is made to fit your excavator.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger drive hitches\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Double pin hitch \/ 30mm","offer_id":66105047253341,"sku":"12-303030","price":490.96,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 32mm","offer_id":66105047286109,"sku":"12-303230","price":506.8,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 35mm","offer_id":66105047318877,"sku":"12-303530","price":516.92,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 38mm","offer_id":66105047351645,"sku":"12-303830","price":454.54,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 40mm","offer_id":66105047384413,"sku":"12-304030","price":535.75,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 44mm","offer_id":66105047417181,"sku":"12-304430","price":589.33,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 45mm","offer_id":66105047449949,"sku":"12-304530","price":601.1,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 50mm","offer_id":66105047482717,"sku":"12-305030","price":629.08,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 55mm","offer_id":66105047515485,"sku":"12-305530","price":658.22,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 60mm","offer_id":66105047548253,"sku":"12-306030","price":697.46,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 30mm","offer_id":66105047581021,"sku":"13-303030","price":685.46,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 32mm","offer_id":66105047613789,"sku":"13-303230","price":719.74,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 35mm","offer_id":66105047646557,"sku":"13-303530","price":755.72,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 38mm","offer_id":66105047679325,"sku":"13-303830","price":793.5,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 40mm","offer_id":66105047712093,"sku":"13-304030","price":833.17,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 44mm","offer_id":66105047744861,"sku":"13-304430","price":916.49,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 45mm","offer_id":66105047777629,"sku":"13-304530","price":934.8,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 50mm","offer_id":66105047810397,"sku":"13-305030","price":961.7,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 55mm","offer_id":66105047843165,"sku":"13-305530","price":1006.73,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 60mm","offer_id":66105047875933,"sku":"13-306030","price":1050.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-3000-4500-max-hitch.png?v=1790926244"},{"product_id":"auger-torque-5500-8000-max-hitch","title":"Auger Torque 5500–8000 MAX Earth Drill Hitch – Double Pin or Cradle","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 5500–8000 MAX hitch\u003c\/strong\u003e mounts an Auger Torque 5500 MAX, 7000 MAX or 8000 MAX earth drill on your excavator. It's made to measure for your machine's pins and dipper, so the drive is mounted securely with no universal brackets and no site modifications.\u003c\/p\u003e\n\n\u003cp\u003eChoose a standard double pin hitch or a double pin cradle hitch, for pins from 40mm to 65mm, to suit 4.5–8 tonne excavators.\u003c\/p\u003e\n\n\u003ch2\u003eDouble Pin or Cradle Hitch?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin hitch:\u003c\/strong\u003e a straightforward, rigid mount with minimal movement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin cradle hitch:\u003c\/strong\u003e gives you more control over the auger's position and angle on uneven ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurements We Need\u003c\/h2\u003e\n\n\u003cp\u003eChoose your pin diameter when you order, then send us the rest of your measurements and we'll confirm everything before the hitch is made:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFront and rear pin diameters\u003c\/li\u003e\n  \u003cli\u003ePin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you use one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take them. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your dipper and pins\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHitch Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 5500 MAX, 7000 MAX and 8000 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch types\u003c\/th\u003e\n\u003ctd\u003eDouble pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePin diameters\u003c\/th\u003e\n\u003ctd\u003e40, 44, 45, 50, 55, 60, 65mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4.5–8 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMade to measure\u003c\/th\u003e\n\u003ctd\u003eYes, to your pin diameters, pin centres and dipper width\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eEach hitch is made to your measurements. Delivery is usually within 7 to 10 working days once we've confirmed them, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHitch FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque \u003ca href=\"\/products\/auger-torque-5500-max-earth-drill\"\u003e5500 MAX\u003c\/a\u003e, \u003ca href=\"\/products\/auger-torque-7000-max-earth-drill\"\u003e7000 MAX\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-8000-max-earth-drill\"\u003e8000 MAX\u003c\/a\u003e earth drills.\u003c\/p\u003e\n\n\u003ch3\u003eDouble pin or cradle hitch?\u003c\/h3\u003e\n\u003cp\u003eThe double pin hitch is the simpler, more rigid mount. The cradle hitch gives you more control over the auger's position and angle on uneven ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if my pins are a different size?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us before ordering\u003c\/a\u003e and we'll check what's available for your machine.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hitch included with the earth drill?\u003c\/h3\u003e\n\u003cp\u003eNo. The earth drill and hitch are sold separately, because the hitch is made to fit your excavator.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger drive hitches\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Double pin hitch \/ 40mm","offer_id":66105076711773,"sku":"13-304035","price":858.2,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 44mm","offer_id":66105076744541,"sku":"13-304435","price":867.74,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 45mm","offer_id":66105076777309,"sku":"13-304535","price":877.27,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 50mm","offer_id":66105076810077,"sku":"13-305035","price":919.36,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 55mm","offer_id":66105076842845,"sku":"13-305535","price":950.11,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 60mm","offer_id":66105076875613,"sku":"13-306035","price":988.96,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 65mm","offer_id":66105076908381,"sku":"13-306535","price":1079.6,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 40mm","offer_id":66105076941149,"sku":"13-304035","price":1070.38,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 44mm","offer_id":66105076973917,"sku":"13-304435","price":1076.33,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 45mm","offer_id":66105077006685,"sku":"13-304535","price":1082.28,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 50mm","offer_id":66105077039453,"sku":"13-305035","price":1094.17,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 55mm","offer_id":66105077072221,"sku":"13-305535","price":1150.82,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 60mm","offer_id":66105077104989,"sku":"13-306035","price":1215.56,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 65mm","offer_id":66105077137757,"sku":"13-306535","price":1264.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-5500-8000-max-hitch.png?v=1790926340"},{"product_id":"auger-torque-12000-15000-max-hitch","title":"Auger Torque 12000–15000 MAX Earth Drill Hitch – Double Pin or Cradle","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 12000–15000 MAX hitch\u003c\/strong\u003e mounts an Auger Torque 12000 MAX or 15000 MAX earth drill on your excavator. It's made to measure for your machine's pins and dipper, so the drive is mounted securely with no universal brackets and no site modifications.\u003c\/p\u003e\n\n\u003cp\u003eChoose a standard double pin hitch or a double pin cradle hitch, for pins from 44mm to 80mm, to suit 8–15 tonne excavators.\u003c\/p\u003e\n\n\u003ch2\u003eDouble Pin or Cradle Hitch?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin hitch:\u003c\/strong\u003e a straightforward, rigid mount with minimal movement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin cradle hitch:\u003c\/strong\u003e gives you more control over the auger's position and angle on uneven ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurements We Need\u003c\/h2\u003e\n\n\u003cp\u003eChoose your pin diameter when you order, then send us the rest of your measurements and we'll confirm everything before the hitch is made:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFront and rear pin diameters\u003c\/li\u003e\n  \u003cli\u003ePin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you use one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take them. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your dipper and pins\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHitch Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 12000 MAX and 15000 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch types\u003c\/th\u003e\n\u003ctd\u003eDouble pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePin diameters\u003c\/th\u003e\n\u003ctd\u003e44, 45, 50, 55, 60, 65, 70, 75, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e8–15 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMade to measure\u003c\/th\u003e\n\u003ctd\u003eYes, to your pin diameters, pin centres and dipper width\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eEach hitch is made to your measurements. Delivery is usually within 7 to 10 working days once we've confirmed them, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHitch FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque \u003ca href=\"\/products\/auger-torque-12000-max-earth-drill\"\u003e12000 MAX\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-15000-max-earth-drill\"\u003e15000 MAX\u003c\/a\u003e earth drills.\u003c\/p\u003e\n\n\u003ch3\u003eDouble pin or cradle hitch?\u003c\/h3\u003e\n\u003cp\u003eThe double pin hitch is the simpler, more rigid mount. The cradle hitch gives you more control over the auger's position and angle on uneven ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if my pins are a different size?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us before ordering\u003c\/a\u003e and we'll check what's available for your machine.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hitch included with the earth drill?\u003c\/h3\u003e\n\u003cp\u003eNo. The earth drill and hitch are sold separately, because the hitch is made to fit your excavator.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger drive hitches\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Double pin hitch \/ 44mm","offer_id":66105077530973,"sku":"12-454445","price":1078.56,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 45mm","offer_id":66105077563741,"sku":"12-454545","price":1084.45,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 50mm","offer_id":66105077596509,"sku":"12-455045","price":1137.86,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 55mm","offer_id":66105077629277,"sku":"12-455545","price":1192.9,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 60mm","offer_id":66105077662045,"sku":"12-456045","price":1254.41,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 65mm","offer_id":66105077694813,"sku":"12-456545","price":1336.96,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 70mm","offer_id":66105077727581,"sku":"12-457045","price":1390.37,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 75mm","offer_id":66105077760349,"sku":"12-457545","price":1511.76,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 80mm","offer_id":66105077793117,"sku":"12-458045","price":1633.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 44mm","offer_id":66105077825885,"sku":"13-454440","price":1347.4,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 45mm","offer_id":66105077858653,"sku":"13-454540","price":1347.4,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 50mm","offer_id":66105077891421,"sku":"13-455040","price":1413.4,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 55mm","offer_id":66105077924189,"sku":"13-455540","price":1484.23,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 60mm","offer_id":66105077956957,"sku":"13-456040","price":1559.89,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 65mm","offer_id":66105077989725,"sku":"13-456540","price":1637.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 70mm","offer_id":66105078022493,"sku":"13-457040","price":1720.87,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 75mm","offer_id":66105078055261,"sku":"13-457540","price":1769.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 80mm","offer_id":66105078088029,"sku":"13-458040","price":1804.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-12000-15000-max-hitch.png?v=1790926341"},{"product_id":"auger-torque-20000-25000-max-hitch","title":"Auger Torque 20000–25000 MAX Earth Drill Hitch – Double Pin or Cradle","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 20000–25000 MAX hitch\u003c\/strong\u003e mounts an Auger Torque 20000 MAX or 25000 MAX earth drill on your excavator. It's made to measure for your machine's pins and dipper, so the drive is mounted securely with no universal brackets and no site modifications.\u003c\/p\u003e\n\n\u003cp\u003eChoose a standard double pin hitch or a double pin cradle hitch, for pins from 44mm to 80mm, to suit 13–22 tonne excavators.\u003c\/p\u003e\n\n\u003ch2\u003eDouble Pin or Cradle Hitch?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin hitch:\u003c\/strong\u003e a straightforward, rigid mount with minimal movement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble pin cradle hitch:\u003c\/strong\u003e gives you more control over the auger's position and angle on uneven ground.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMeasurements We Need\u003c\/h2\u003e\n\n\u003cp\u003eChoose your pin diameter when you order, then send us the rest of your measurements and we'll confirm everything before the hitch is made:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFront and rear pin diameters\u003c\/li\u003e\n  \u003cli\u003ePin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you use one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take them. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your dipper and pins\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHitch Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 20000 MAX and 25000 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHitch types\u003c\/th\u003e\n\u003ctd\u003eDouble pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePin diameters\u003c\/th\u003e\n\u003ctd\u003e44, 45, 50, 55, 60, 65, 70, 75, 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e13–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMade to measure\u003c\/th\u003e\n\u003ctd\u003eYes, to your pin diameters, pin centres and dipper width\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\n\u003cp\u003eEach hitch is made to your measurements. Delivery is usually within 7 to 10 working days once we've confirmed them, although factory lead times can change this. If you need it for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHitch FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque \u003ca href=\"\/products\/auger-torque-20000-max-earth-drill\"\u003e20000 MAX\u003c\/a\u003e and \u003ca href=\"\/products\/auger-torque-25000-max-earth-drill\"\u003e25000 MAX\u003c\/a\u003e earth drills.\u003c\/p\u003e\n\n\u003ch3\u003eDouble pin or cradle hitch?\u003c\/h3\u003e\n\u003cp\u003eThe double pin hitch is the simpler, more rigid mount. The cradle hitch gives you more control over the auger's position and angle on uneven ground.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if my pins are a different size?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us before ordering\u003c\/a\u003e and we'll check what's available for your machine.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hitch included with the earth drill?\u003c\/h3\u003e\n\u003cp\u003eNo. The earth drill and hitch are sold separately, because the hitch is made to fit your excavator.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-hitches\"\u003eauger drive hitches\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Double pin hitch \/ 44mm","offer_id":66105101517149,"sku":"12-454445","price":1078.56,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 45mm","offer_id":66105101549917,"sku":"12-454545","price":1084.45,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 50mm","offer_id":66105101582685,"sku":"12-455045","price":1137.86,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 55mm","offer_id":66105101615453,"sku":"12-455545","price":1192.9,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 60mm","offer_id":66105101648221,"sku":"12-456045","price":1254.41,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 65mm","offer_id":66105101680989,"sku":"12-456545","price":1336.96,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 70mm","offer_id":66105101713757,"sku":"12-457045","price":1390.37,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 75mm","offer_id":66105101746525,"sku":"12-457545","price":1511.76,"currency_code":"GBP","in_stock":true},{"title":"Double pin hitch \/ 80mm","offer_id":66105101779293,"sku":"12-458045","price":1633.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 50mm","offer_id":66105101812061,"sku":"13-455045","price":1413.4,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 55mm","offer_id":66105101844829,"sku":"13-455545","price":1484.23,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 60mm","offer_id":66105101877597,"sku":"13-456045","price":1559.89,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 65mm","offer_id":66105101910365,"sku":"13-456545","price":1637.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 70mm","offer_id":66105101943133,"sku":"13-457045","price":1720.87,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 75mm","offer_id":66105101975901,"sku":"13-457545","price":1769.16,"currency_code":"GBP","in_stock":true},{"title":"Double pin cradle hitch \/ 80mm","offer_id":66105102008669,"sku":"13-458045","price":1804.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-20000-25000-max-hitch.png?v=1790926409"},{"product_id":"auger-torque-log-splitter","title":"Auger Torque Log Splitter for Earth Drills","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque log splitter\u003c\/strong\u003e fits your earth drill in place of an auger and splits logs as it turns. As it rotates, its self-guiding threaded cone bites into the timber and draws itself in, splitting the log in two. For bigger logs, reposition it to carry on the split along the length of the log.\u003c\/p\u003e\n\n\u003cp\u003eIt turns fallen trees into manageable pieces quickly, using the excavator and earth drill you already have.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Version Do I Need?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e65mm round:\u003c\/strong\u003e for earth drills with a 65mm round output shaft (X1500 to 4500 MAX).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e65mm round with locking strap:\u003c\/strong\u003e supplied with the strap for X1500 to X2500 drives, or for 3000 MAX to 4500 MAX drives.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75mm square:\u003c\/strong\u003e for earth drills with a 75mm square output shaft (5500 MAX and larger).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75mm square with locking strap:\u003c\/strong\u003e supplied with the strap for 5500 MAX to 8000 MAX drives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSelf-guiding threaded cone that draws itself into the timber\u003c\/li\u003e\n  \u003cli\u003eSplits logs in two as it turns\u003c\/li\u003e\n  \u003cli\u003eReposition it to split along the full length of bigger logs\u003c\/li\u003e\n  \u003cli\u003eFits your earth drill in place of an auger, with no extra hydraulics\u003c\/li\u003e\n  \u003cli\u003e65mm round or 75mm square fitting, with or without a locking strap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLog Splitter FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque drives with a 65mm round output shaft (X1500 to 4500 MAX) or a 75mm square output shaft (5500 MAX and larger). Choose the fitting that matches your drive.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it need its own hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It runs off your earth drill, which runs off your excavator's auxiliary circuit.\u003c\/p\u003e\n\n\u003ch3\u003eHow long is delivery?\u003c\/h3\u003e\n\u003cp\u003eUsually 7 to 10 working days. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e if you need it for a fixed date.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-attachments\"\u003eauger drive attachments\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"65mm round","offer_id":66105102336349,"sku":"37-1067-KIT","price":949.09,"currency_code":"GBP","in_stock":true},{"title":"65mm round + locking strap for X1500–X2500","offer_id":66105102369117,"sku":"37-1067-KIT \u0026 13-3903-L-S","price":1007.56,"currency_code":"GBP","in_stock":true},{"title":"65mm round + locking strap for 3000–4500 MAX","offer_id":66105102401885,"sku":"37-1067-KIT \u0026 13-3904-L-S","price":1009.15,"currency_code":"GBP","in_stock":true},{"title":"75mm square","offer_id":66105102434653,"sku":"37-1958","price":1117.46,"currency_code":"GBP","in_stock":true},{"title":"75mm square + locking strap for 5500–8000 MAX","offer_id":66105102467421,"sku":"37-1958 \u0026 13-3905-L-S","price":1178.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-log-splitter.png?v=1790926410"},{"product_id":"auger-torque-stump-planer-250mm","title":"Auger Torque Stump Planer – 250mm (10\")","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 250mm stump planer\u003c\/strong\u003e fits your earth drill in place of an auger and planes tree stumps away quietly, with far less clean-up than traditional methods that shower chippings over a wide area.\u003c\/p\u003e\n\n\u003cp\u003eHardened steel blades do the cutting, a hardened steel pilot keeps the cut accurate and built-in stability bars keep it steady. At 250mm (10\") across, it can take bigger stumps in several passes, working round in a spiral.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Hub Do I Need?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e65mm round:\u003c\/strong\u003e for earth drills with a 65mm round output shaft (X1500 to 4500 MAX).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75mm square:\u003c\/strong\u003e for earth drills with a 75mm square output shaft (5500 MAX and larger).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e250mm (10\") cutting diameter\u003c\/li\u003e\n  \u003cli\u003eHardened steel blades\u003c\/li\u003e\n  \u003cli\u003eHardened steel pilot for an accurate cut\u003c\/li\u003e\n  \u003cli\u003eBuilt-in stability bars\u003c\/li\u003e\n  \u003cli\u003eMulti-pass cutting for bigger stumps\u003c\/li\u003e\n  \u003cli\u003eQuiet, with limited clean-up afterwards\u003c\/li\u003e\n  \u003cli\u003e65mm round or 75mm square hub\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eHow quickly it cuts depends on your machine's hydraulic pressure and the type of wood.\u003c\/p\u003e\n\n\u003ch2\u003eStump Planer FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque drives with a 65mm round output shaft (X1500 to 4500 MAX) or a 75mm square output shaft (5500 MAX and larger).\u003c\/p\u003e\n\n\u003ch3\u003eCan it take stumps bigger than the planer?\u003c\/h3\u003e\n\u003cp\u003eYes. Make several passes, working round the stump in a spiral, until it's planed down.\u003c\/p\u003e\n\n\u003ch3\u003e250mm or 350mm?\u003c\/h3\u003e\n\u003cp\u003eThe 350mm planer cuts a wider path, so it covers a stump in fewer passes. The 250mm planer is the smaller choice.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-attachments\"\u003eauger drive attachments\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"65mm round","offer_id":66105118982493,"sku":"37-025035200","price":1206.91,"currency_code":"GBP","in_stock":true},{"title":"75mm square","offer_id":66105119015261,"sku":"37-025035600","price":1326.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-stump-planer-250mm.png?v=1790926454"},{"product_id":"auger-torque-stump-planer-350mm","title":"Auger Torque Stump Planer – 350mm (14\")","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 350mm stump planer\u003c\/strong\u003e fits your earth drill in place of an auger and planes tree stumps away quietly, with far less clean-up than traditional methods that shower chippings over a wide area.\u003c\/p\u003e\n\n\u003cp\u003eHardened steel blades do the cutting, a hardened steel pilot keeps the cut accurate and built-in stability bars keep it steady. At 350mm (14\") across, it can take bigger stumps in several passes, working round in a spiral.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Hub Do I Need?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e65mm round:\u003c\/strong\u003e for earth drills with a 65mm round output shaft (X1500 to 4500 MAX).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75mm square:\u003c\/strong\u003e for earth drills with a 75mm square output shaft (5500 MAX and larger).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e350mm (14\") cutting diameter\u003c\/li\u003e\n  \u003cli\u003eHardened steel blades\u003c\/li\u003e\n  \u003cli\u003eHardened steel pilot for an accurate cut\u003c\/li\u003e\n  \u003cli\u003eBuilt-in stability bars\u003c\/li\u003e\n  \u003cli\u003eMulti-pass cutting for bigger stumps\u003c\/li\u003e\n  \u003cli\u003eQuiet, with limited clean-up afterwards\u003c\/li\u003e\n  \u003cli\u003e65mm round or 75mm square hub\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eHow quickly it cuts depends on your machine's hydraulic pressure and the type of wood.\u003c\/p\u003e\n\n\u003ch2\u003eStump Planer FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque drives with a 65mm round output shaft (X1500 to 4500 MAX) or a 75mm square output shaft (5500 MAX and larger).\u003c\/p\u003e\n\n\u003ch3\u003eCan it take stumps bigger than the planer?\u003c\/h3\u003e\n\u003cp\u003eYes. Make several passes, working round the stump in a spiral, until it's planed down.\u003c\/p\u003e\n\n\u003ch3\u003e250mm or 350mm?\u003c\/h3\u003e\n\u003cp\u003eThe 350mm planer cuts a wider path, so it covers a stump in fewer passes. The 250mm planer is the smaller choice.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-attachments\"\u003eauger drive attachments\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"65mm round","offer_id":66105119277405,"sku":"37-035035200","price":1474.32,"currency_code":"GBP","in_stock":true},{"title":"75mm square","offer_id":66105119310173,"sku":"37-035035600","price":1623.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-stump-planer-350mm.jpg?v=1790926455"},{"product_id":"auger-torque-cement-mixer-bowl","title":"Auger Torque Cement Mixer Bowl for Earth Drills – 180 Litre","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque cement mixer bowl\u003c\/strong\u003e turns your earth drill into a concrete mixer, so you can mix on site for fencing, posts and small construction jobs without bringing in a separate mixer.\u003c\/p\u003e\n\n\u003cp\u003eIt holds 180 litres and has a mixer cradle hitch for quick attachment and removal. Choose the connection that matches your earth drill's output shaft.\u003c\/p\u003e\n\n\u003ch2\u003eWhich Connection Do I Need?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e65mm round:\u003c\/strong\u003e for earth drills with a 65mm round output shaft (X1500 to 4500 MAX).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75mm square:\u003c\/strong\u003e for earth drills with a 75mm square output shaft (5500 MAX and larger).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e180-litre capacity\u003c\/li\u003e\n  \u003cli\u003eDriven by your Auger Torque earth drill\u003c\/li\u003e\n  \u003cli\u003eMixer cradle hitch for quick attachment and removal\u003c\/li\u003e\n  \u003cli\u003eFor small to medium batches of concrete on site\u003c\/li\u003e\n  \u003cli\u003e65mm round or 75mm square connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMixer Bowl FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhich earth drills does it fit?\u003c\/h3\u003e\n\u003cp\u003eAuger Torque drives with a 65mm round output shaft (X1500 to 4500 MAX) or a 75mm square output shaft (5500 MAX and larger).\u003c\/p\u003e\n\n\u003ch3\u003eHow much does it hold?\u003c\/h3\u003e\n\u003cp\u003e180 litres.\u003c\/p\u003e\n\n\u003ch3\u003eHow long is delivery?\u003c\/h3\u003e\n\u003cp\u003eUsually 7 to 10 working days. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e if you need it for a fixed date.\u003c\/p\u003e\n\n\u003cp\u003eSee all our \u003ca href=\"\/collections\/auger-drive-attachments\"\u003eauger drive attachments\u003c\/a\u003e, or browse our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"65mm round","offer_id":66105119441245,"sku":"51-4916","price":512.62,"currency_code":"GBP","in_stock":true},{"title":"75mm square","offer_id":66105119474013,"sku":"51-4904-S5","price":594.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/auger-torque-cement-mixer-bowl.jpg?v=1790926456"},{"product_id":"auger-torque-35000-65000-max-earth-drills","title":"Auger Torque 35,000–65,000 MAX Earth Drills for 20–45 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque 35,000 MAX, 42,000 MAX and 65,000 MAX\u003c\/strong\u003e are heavy duty earth drills for 20 to 45 tonne excavators. With up to 66,589Nm of torque, they turn PA augers from 300mm to 2.4m across for foundation piles, poles and masts, and deep, large diameter holes.\u003c\/p\u003e\n\u003cp\u003eEach drive has Auger Torque's planetary gearbox, a single-piece non-dislodgement shaft and a 110mm square output shaft that takes PA augers. A case drain line is required, and an optional 2-way valve lets you run the drive from a single-acting hammer circuit.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eHole sizes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e35,000 MAX\u003c\/td\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e20,937–33,500Nm\u003c\/td\u003e\n\u003ctd\u003e100–225 l\/min\u003c\/td\u003e\n\u003ctd\u003e150–240 bar\u003c\/td\u003e\n\u003ctd\u003e11–26 rpm\u003c\/td\u003e\n\u003ctd\u003e442kg\u003c\/td\u003e\n\u003ctd\u003e300–1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42,000 MAX\u003c\/td\u003e\n\u003ctd\u003e20–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e24,925–42,729Nm\u003c\/td\u003e\n\u003ctd\u003e100–225 l\/min\u003c\/td\u003e\n\u003ctd\u003e140–240 bar\u003c\/td\u003e\n\u003ctd\u003e9–20 rpm\u003c\/td\u003e\n\u003ctd\u003e442kg\u003c\/td\u003e\n\u003ctd\u003e300–1,800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e33,295–66,589Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–320 bar\u003c\/td\u003e\n\u003ctd\u003e8–21 rpm\u003c\/td\u003e\n\u003ctd\u003e480kg\u003c\/td\u003e\n\u003ctd\u003e300–2,400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e110mm square (adaptors available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003eAuger Torque PA augers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eSingle pin hitch or double pin cradle hitch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1411mm (35,000 and 42,000 MAX), 1556mm (65,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e406mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase drain line\u003c\/th\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptions\u003c\/th\u003e\n\u003ctd\u003e2-way valve and pressure relief valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 66,589Nm of torque\u003c\/li\u003e\n\u003cli\u003eDrills holes up to 2.4m across with PA augers\u003c\/li\u003e\n\u003cli\u003ePlanetary gearbox to multiply the motor's torque\u003c\/li\u003e\n\u003cli\u003eSingle-piece non-dislodgement shaft, with a lifetime warranty against dislodgement\u003c\/li\u003e\n\u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than competing drives'\u003c\/li\u003e\n\u003cli\u003eForged hood ears with locked hood pins\u003c\/li\u003e\n\u003cli\u003eOptional 2-way valve and pressure relief valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eThese drives need a high flow two-way auxiliary circuit and a case drain line, so check your excavator's flow and pressure against the table. Send us your excavator make, model and weight, its pin sizes, and the hole diameters and depths you need.\u003c\/p\u003e\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e compares every drive from 0.75 to 50 tonnes. We'll quote the drive, hitch and \u003ca href=\"\/products\/auger-torque-pa-auger\"\u003ePA augers\u003c\/a\u003e together. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e to get started.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eNeed more torque? See the \u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque high torque earth drills\u003c\/a\u003e, from 70,000 to 150,000 MAX. Drilling rock? See the \u003ca href=\"\/products\/auger-torque-hard-rock-auger\"\u003eAuger Torque hard rock auger\u003c\/a\u003e. For excavators up to 22 tonnes, compare our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e, or browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66281687220573,"sku":"AT-35000-65000-MAX","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/20-45T-e1746541312363.png?v=1792596049"},{"product_id":"auger-torque-high-torque-earth-drills","title":"Auger Torque High Torque Earth Drills for 21–50 Tonne Excavators","description":"\u003cp\u003e\u003cstrong\u003eAuger Torque high torque earth drills\u003c\/strong\u003e are the heaviest drives in the range, for 21 to 50 tonne excavators. The 70,000 MAX and 80,000 MAX deliver up to 80,898Nm, and the 100,000 MAX and 150,000 MAX up to 152,319Nm, for large diameter and deep drilling, foundation piles, pole and mast installations, core barrel drilling and large screw piles.\u003c\/p\u003e\n\u003cp\u003eEach drive uses an axial piston motor and Auger Torque's planetary gearbox, with a single-piece non-dislodgement shaft that carries a lifetime warranty. The 70,000 and 80,000 MAX have a 130mm square output shaft, with 130mm hex as an option, and the 100,000 and 150,000 MAX have a 150mm hex shaft.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eTorque\u003c\/th\u003e\n\u003cth\u003eOil flow\u003c\/th\u003e\n\u003cth\u003eOil pressure\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e70,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e38,016–71,280Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–300 bar\u003c\/td\u003e\n\u003ctd\u003e7–19 rpm\u003c\/td\u003e\n\u003ctd\u003e750kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–45 tonnes\u003c\/td\u003e\n\u003ctd\u003e46,227–80,898Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–280 bar\u003c\/td\u003e\n\u003ctd\u003e9–15 rpm\u003c\/td\u003e\n\u003ctd\u003e760kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e45,746–100,069Nm\u003c\/td\u003e\n\u003ctd\u003e100–280 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–350 bar\u003c\/td\u003e\n\u003ctd\u003e5–15 rpm\u003c\/td\u003e\n\u003ctd\u003e1,061kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150,000 MAX\u003c\/td\u003e\n\u003ctd\u003e21–50 tonnes\u003c\/td\u003e\n\u003ctd\u003e71,680–152,319Nm\u003c\/td\u003e\n\u003ctd\u003e100–340 l\/min\u003c\/td\u003e\n\u003ctd\u003e160–340 bar\u003c\/td\u003e\n\u003ctd\u003e4–12 rpm\u003c\/td\u003e\n\u003ctd\u003e1,491kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput shaft\u003c\/th\u003e\n\u003ctd\u003e130mm square or hex (70,000 and 80,000 MAX), 150mm hex (100,000 and 150,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAugers\u003c\/th\u003e\n\u003ctd\u003ePA augers from 300mm to 2.4m on the 70,000 and 80,000 MAX; ask us for the 100,000 and 150,000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHitch\u003c\/th\u003e\n\u003ctd\u003eDouble pin cradle (double pin hitch also available on the 70,000 and 80,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize (height x diameter)\u003c\/th\u003e\n\u003ctd\u003e1625 x 524mm (70,000 and 80,000 MAX), 1623 x 636mm (100,000 MAX), 1863 x 766mm (150,000 MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCase drain line\u003c\/th\u003e\n\u003ctd\u003eRequired on the 70,000 and 80,000 MAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptions\u003c\/th\u003e\n\u003ctd\u003e2-way valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 152,319Nm of torque\u003c\/li\u003e\n\u003cli\u003eAxial piston motor and planetary gearbox\u003c\/li\u003e\n\u003cli\u003e130mm or 150mm drive shafts\u003c\/li\u003e\n\u003cli\u003eSingle-piece non-dislodgement shaft with a lifetime warranty\u003c\/li\u003e\n\u003cli\u003eOutput shaft bearings that Auger Torque says are up to 50% larger than its leading competitors'\u003c\/li\u003e\n\u003cli\u003eWorks with Auger Torque alignment monitors (100,000 and 150,000 MAX)\u003c\/li\u003e\n\u003cli\u003eOptional 2-way valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eCheck your excavator's auxiliary flow and pressure against the table. These drives need a two-way circuit, or the optional 2-way valve on a single-acting hammer circuit, and the 70,000 and 80,000 MAX need a case drain line.\u003c\/p\u003e\n\u003cp\u003eSend us your excavator make, model and weight, and tell us about the job: the hole diameter and depth, the ground, and whether you're drilling, coring or installing screw piles. We'll quote the drive, hitch and augers together, and our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e compares the whole range. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e to get started.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eFor less demanding work on 20 to 45 tonne excavators, see the \u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 35,000–65,000 MAX earth drills\u003c\/a\u003e. For the augers, see the \u003ca href=\"\/products\/auger-torque-pa-auger\"\u003eAuger Torque PA augers\u003c\/a\u003e and the \u003ca href=\"\/products\/auger-torque-hard-rock-auger\"\u003eAuger Torque hard rock auger\u003c\/a\u003e, or browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66281687253341,"sku":"AT-HIGH-TORQUE-DRILLS","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/21-45T-e1746541430176.png?v=1792596050"},{"product_id":"auger-torque-pa-auger","title":"Auger Torque PA Augers, 300mm to 2.4m, for 20–45 Tonne Excavators","description":"\u003cp\u003e\u003cstrong\u003eAuger Torque PA augers\u003c\/strong\u003e are large diameter augers for the 35,000 MAX to 80,000 MAX earth drills on 20 to 45 tonne excavators. They drill holes from 300mm to 2.4m across for foundation piles, poles and masts, and come in 2.3m and 3.3m lengths.\u003c\/p\u003e\n\u003cp\u003eThe extra long flighted sections have shallow pitch flights that keep the spoil on the auger, and the teeth use Auger Torque's Shock Lock tooth locking system. Choose earth, rock or TCH versions to suit the ground, with pilot and tooth options for anything from soft ground to rock and permafrost.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameters\u003c\/th\u003e\n\u003ctd\u003e300, 350, 400, 450, 500, 550, 600, 700, 750, 800 and 900mm, then 1m, 1.2m, 1.5m, 1.8m, 2m, 2.2m and 2.4m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOver 1.5m\u003c\/th\u003e\n\u003ctd\u003eConfirmed with your quote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003ctd\u003e2.3m or 3.3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersions\u003c\/th\u003e\n\u003ctd\u003eEarth, rock or TCH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003e110mm square as standard, other hubs available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAuger Torque 35,000 MAX to 80,000 MAX earth drills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtensions\u003c\/th\u003e\n\u003ctd\u003eFixed or telescopic, 2m or 3m long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtra long flighted sections with shallow pitch flights\u003c\/li\u003e\n\u003cli\u003eShock Lock tooth locking system\u003c\/li\u003e\n\u003cli\u003eHeavy duty tubes in high-grade steel\u003c\/li\u003e\n\u003cli\u003eConstant spiral cut teeth\u003c\/li\u003e\n\u003cli\u003ePilot and tooth options from soft ground to rock and permafrost\u003c\/li\u003e\n\u003cli\u003eHard facing on request\u003c\/li\u003e\n\u003cli\u003eFixed and telescopic extensions, supplied with a pin and clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eTell us the earth drill you're using, the hole diameter and depth, and the ground you're drilling. Telescopic extensions are only suitable for drives up to 42,000Nm, so we'll quote fixed extensions for bigger drives. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e shows which drive suits your excavator.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your drive and machine details, and we'll confirm the auger, teeth and extensions with your price.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eDrilling hard or fractured rock? See the \u003ca href=\"\/products\/auger-torque-hard-rock-auger\"\u003eAuger Torque hard rock auger\u003c\/a\u003e. For the drives, see the \u003ca href=\"\/products\/auger-torque-35000-65000-max-earth-drills\"\u003eAuger Torque 35,000–65,000 MAX earth drills\u003c\/a\u003e and the \u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque high torque earth drills\u003c\/a\u003e. For smaller machines, compare our \u003ca href=\"\/collections\/excavator-auger-bits\"\u003eexcavator auger bits\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66281690431837,"sku":"AT-PA-AUGER","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/augers-extensions-excavators-17T-45T-1.jpg?v=1792596082"},{"product_id":"auger-torque-hard-rock-auger","title":"Auger Torque Hard Rock Auger for 10–50 Tonne Excavators","description":"\u003cp\u003eThe \u003cstrong\u003eAuger Torque hard rock auger\u003c\/strong\u003e is built for fractured hard rock and extremely abrasive ground, to get the hole drilled when regular rock augers start to refuse. It suits excavators from 10 to 50 tonnes and drills holes from 300mm to 1m across.\u003c\/p\u003e\n\u003cp\u003eRotating rock picks sit on an aggressive tapered cutting head. Each tooth makes its own fresh cut on every turn and is angled to direct spoil towards the centre, breaking the rock into large pieces that come to the surface quickly without clogging. Only the rotating picks wear, not the pockets or holders. The heavy wall tube and 20mm starter flight give it the strength for the toughest ground.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameters\u003c\/th\u003e\n\u003ctd\u003e300mm to 1m, custom diameters on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003e75mm square (S6 earth drills) or 110mm square (PA earth drills)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e2.4m as standard, custom lengths available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlights\u003c\/th\u003e\n\u003ctd\u003e20mm starter flight, 12mm on the remaining flights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTeeth\u003c\/th\u003e\n\u003ctd\u003eRotating rock picks and rock pilot on a tapered cutting head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptions\u003c\/th\u003e\n\u003ctd\u003eHard facing, continuous flight, or fully flighted in timed sections (CFA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–50 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRotating rock picks on a tapered cutting head\u003c\/li\u003e\n\u003cli\u003eEach tooth makes a fresh cut on every turn\u003c\/li\u003e\n\u003cli\u003eBreaks rock into large pieces for faster spoil removal\u003c\/li\u003e\n\u003cli\u003eOnly the picks wear, not the pockets or holders\u003c\/li\u003e\n\u003cli\u003eHeavy wall tube and 20mm starter flight\u003c\/li\u003e\n\u003cli\u003eOptional hard facing for abrasive ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eTell us your earth drill model, the hole diameter and depth, and the rock you're drilling if you know it. Rock drilling takes a lot of torque, so we'll check your drive suits the diameter you need. Our guide on \u003ca href=\"\/blogs\/news\/what-size-auger-do-i-need\"\u003ewhat size auger you need\u003c\/a\u003e covers teeth and drive sizes.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote\u003c\/a\u003e with your machine and drive details.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eFor earth and mixed ground on large excavators, see the \u003ca href=\"\/products\/auger-torque-pa-auger\"\u003eAuger Torque PA augers\u003c\/a\u003e. For the drives, compare our \u003ca href=\"\/collections\/excavator-auger-drives\"\u003eexcavator auger drives\u003c\/a\u003e and the \u003ca href=\"\/products\/auger-torque-high-torque-earth-drills\"\u003eAuger Torque high torque earth drills\u003c\/a\u003e, or browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66281690464605,"sku":"AT-HARD-ROCK-AUGER","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/ATE-Hard-Rock-Augers-Thumbnail-Web-1.png?v=1792596082"},{"product_id":"auger-torque-clean-out-disc","title":"Auger Torque Clean Out Disc – 300mm to 1.2m, X1500 to 25,000 MAX","description":"\u003cp\u003eAn Auger Torque \u003cstrong\u003eclean out disc\u003c\/strong\u003e clears the loose spoil an auger leaves at the bottom of a hole, leaving a clean, flat and more compact base for the concrete and rebar in pier foundations. It runs on the same earth drill, straight after the auger.\u003c\/p\u003e\n\u003cp\u003eDiscs come in widths from 300mm to 1.2m to match the hole you've drilled. They fit earth drills from the X1500 to the 25,000 MAX on 1 to 22 tonne excavators, mini loaders and skid steers, with a 65mm round or 75mm square fitting.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWidths\u003c\/th\u003e\n\u003cth\u003eFits earth drills\u003c\/th\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003cth\u003eMachines\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e300mm to 1,200mm\u003c\/td\u003e\n\u003ctd\u003eX1500 to 25,000 MAX\u003c\/td\u003e\n\u003ctd\u003e65mm round or 75mm square\u003c\/td\u003e\n\u003ctd\u003eExcavators 1–22 tonnes, mini loaders, skid steers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eOn the same earth drill, straight after the auger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResult\u003c\/th\u003e\n\u003ctd\u003eA clean, flat and more compact base for concrete and rebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClears loose spoil from the bottom of the hole\u003c\/li\u003e\n\u003cli\u003eLeaves a flat, compact base for pier foundations\u003c\/li\u003e\n\u003cli\u003eRuns on the earth drill you already have\u003c\/li\u003e\n\u003cli\u003eWidths from 300mm to 1.2m\u003c\/li\u003e\n\u003cli\u003e65mm round or 75mm square fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eChoose the disc width to suit the holes you drill, and the fitting to match your earth drill's output shaft: 65mm round for X1500 to 4500 MAX drives, or 75mm square for 5500 MAX and larger. Tell us your drive and hole size, then \u003ca href=\"\/pages\/request-a-quote\"\u003erequest a quote\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eRelated Attachments\u003c\/h2\u003e\n\u003cp\u003eGet more from your drive with our other \u003ca href=\"\/collections\/auger-drive-attachments\"\u003eauger drive attachments\u003c\/a\u003e, including the log splitter, stump planers and cement mixer bowl. Browse all our \u003ca href=\"\/collections\/excavator-augers\"\u003eexcavator augers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Auger Torque","offers":[{"title":"Default Title","offer_id":66290460950877,"sku":"AT-CLEAN-OUT-DISC","price":0.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/Clean-Out-Disc.png?v=1792658044"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/collections\/drill-in-action.png?v=1790926669","url":"https:\/\/mammothattachments.com\/collections\/excavator-augers.oembed?page=2","provider":"Mammoth Attachments","version":"1.0","type":"link"}