{"title":"Excavator Grabs \u0026 Grapples","description":"\u003cp\u003e\u003cstrong\u003eExcavator grabs and grapples\u003c\/strong\u003e let one machine sort, load, move and clear, whether you're handling demolition waste, logs and brash, stone or scrap. Our range covers 1 to 36 tonne excavators, from manual grapples that need no hydraulics and thumbs that turn your bucket into a grab, to fully hydraulic selector, timber and folding grabs with optional 360° rotation.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrab type\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eSelector grabs\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDemolition, waste, stone and scrap\u003c\/td\u003e\n\u003ctd\u003eFixed: one double-acting circuit. Rotating: two\u003c\/td\u003e\n\u003ctd\u003e1–36 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eTimber grabs\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLogs, stumps and forestry\u003c\/td\u003e\n\u003ctd\u003eOne double-acting circuit, two with the rotator\u003c\/td\u003e\n\u003ctd\u003e1–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eFolding grabs\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLogs, brash, stone and scrap\u003c\/td\u003e\n\u003ctd\u003eOne double-acting circuit, two with the rotator\u003c\/td\u003e\n\u003ctd\u003e2–16 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eManual grapples\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLand clearance and skip sorting\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e1–30 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/excavator-thumbs\"\u003eExcavator thumbs\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTurning your bucket into a grab\u003c\/td\u003e\n\u003ctd\u003eManual: none. Hydraulic: one double-acting service\u003c\/td\u003e\n\u003ctd\u003e1–25 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eNot sure which type suits your work? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares them side by side, or \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine details\u003c\/a\u003e and we'll recommend the right grab.\u003c\/p\u003e","products":[{"product_id":"2-3-5-tonne-excavator-selector-grab","title":"2–3.5 Tonne Excavator Selector Grab – 1,150mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne excavator selector grab\u003c\/strong\u003e is a heavy-duty hydraulic sorting grab for demolition, material and waste handling, and stone or rock processing. It opens to 1,150mm, weighs 205kg without the headstock, and runs off a single double-acting hydraulic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIts toeplates pinch together for a tight grip and keep meeting even as the cutting edges wear. The reversible, bolt-on hardened cutting edges and tine-style legs are built to stay rigid in harsh environments, a pressure relief valve stops the cylinder putting too much force on the edges and legs, and manual stoppers protect the cylinder from overextension.\u003c\/p\u003e\n\n\u003cp\u003eThis fixed model uses a 2-way crosslink instead of a 360° rotator, which keeps the cost down. If you want to turn the grab to any angle, the \u003ca href=\"\/products\/1-8-3-5-tonne-rotating-excavator-selector-grab\"\u003e1.8–3.5 tonne rotating selector grab\u003c\/a\u003e adds a hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 2–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e1,150mm maximum opening and 505mm width\u003c\/li\u003e\n  \u003cli\u003eTine-style legs with 8mm inner and 12mm outer tines\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep pinching together as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the cylinder overextending\u003c\/li\u003e\n  \u003cli\u003eRuns off a single double-acting hydraulic circuit\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-SG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e505mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg tine thickness\u003c\/th\u003e\n\u003ctd\u003e8mm inner, 12mm outer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight (excluding headstock)\u003c\/th\u003e\n\u003ctd\u003e205kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuit\u003c\/th\u003e\n\u003ctd\u003eSingle double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eNone (2-way crosslink)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed selector grab is the cost-effective choice when you can line the machine up with the material. A rotating selector grab turns through 360°, so you can work in tight spots and place material precisely without repositioning, but it needs a second double-acting circuit. Compare both in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab runs off a single double-acting hydraulic circuit, at a working pressure of 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a selector grab used for?\u003c\/h3\u003e\n\u003cp\u003eSelector grabs are built for demolition, sorting waste, material handling and processing stone or rock. The tine-style legs and hardened edges suit heavy-duty work as well as general material handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA single double-acting hydraulic circuit. The rotating selector grabs need two double-acting circuits, one more than this fixed model.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/4-6-tonne-excavator-selector-grab\"\u003e4–6 tonne selector grab\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097191125341,"sku":"020-SG","price":2868.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-excavator-selector-grab.png?v=1790864917"},{"product_id":"4-6-tonne-excavator-selector-grab","title":"4–6 Tonne Excavator Selector Grab – 1,500mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e4–6 tonne excavator selector grab\u003c\/strong\u003e is a heavy-duty hydraulic sorting grab for demolition, material and waste handling, and stone or rock processing. It opens to 1,500mm, weighs 315kg without the headstock, and runs off a single double-acting hydraulic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIts toeplates pinch together for a tight grip and keep meeting even as the cutting edges wear. The reversible, bolt-on hardened cutting edges and tine-style legs are built to stay rigid in harsh environments, a pressure relief valve stops the cylinder putting too much force on the edges and legs, and manual stoppers protect the cylinder from overextension.\u003c\/p\u003e\n\n\u003cp\u003eThis fixed model uses a 2-way crosslink instead of a 360° rotator, which keeps the cost down. If you want to turn the grab to any angle, the \u003ca href=\"\/products\/3-5-5-tonne-rotating-excavator-selector-grab\"\u003e3–5.5 tonne rotating selector grab\u003c\/a\u003e adds a hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 4–6 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e1,500mm maximum opening and 622mm width\u003c\/li\u003e\n  \u003cli\u003eTine-style legs with 10mm inner and 15mm outer tines\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep pinching together as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the cylinder overextending\u003c\/li\u003e\n  \u003cli\u003eRuns off a single double-acting hydraulic circuit\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–6 Tonne Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e040-SG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–6 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e622mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg tine thickness\u003c\/th\u003e\n\u003ctd\u003e10mm inner, 15mm outer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight (excluding headstock)\u003c\/th\u003e\n\u003ctd\u003e315kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuit\u003c\/th\u003e\n\u003ctd\u003eSingle double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eNone (2-way crosslink)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed selector grab is the cost-effective choice when you can line the machine up with the material. A rotating selector grab turns through 360°, so you can work in tight spots and place material precisely without repositioning, but it needs a second double-acting circuit. Compare both in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab runs off a single double-acting hydraulic circuit, at a working pressure of 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–6 Tonne Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a selector grab used for?\u003c\/h3\u003e\n\u003cp\u003eSelector grabs are built for demolition, sorting waste, material handling and processing stone or rock. The tine-style legs and hardened edges suit heavy-duty work as well as general material handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA single double-acting hydraulic circuit. The rotating selector grabs need two double-acting circuits, one more than this fixed model.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–6 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-selector-grab\"\u003e2–3.5 tonne selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/6-9-tonne-excavator-selector-grab\"\u003e6–9 tonne selector grab\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097191321949,"sku":"040-SG","price":3348.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-6-tonne-excavator-selector-grab.png?v=1790864917"},{"product_id":"6-9-tonne-excavator-selector-grab","title":"6–9 Tonne Excavator Selector Grab – 1,625mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e6–9 tonne excavator selector grab\u003c\/strong\u003e is a heavy-duty hydraulic sorting grab for demolition, material and waste handling, and stone or rock processing. It opens to 1,625mm, weighs 446kg without the headstock, and runs off a single double-acting hydraulic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIts toeplates pinch together for a tight grip and keep meeting even as the cutting edges wear. The reversible, bolt-on hardened cutting edges and tine-style legs are built to stay rigid in harsh environments, a pressure relief valve stops the cylinder putting too much force on the edges and legs, and manual stoppers protect the cylinder from overextension.\u003c\/p\u003e\n\n\u003cp\u003eThis fixed model uses a 2-way crosslink instead of a 360° rotator, which keeps the cost down. If you want to turn the grab to any angle, the \u003ca href=\"\/products\/5-9-tonne-rotating-excavator-selector-grab\"\u003e5–9 tonne rotating selector grab\u003c\/a\u003e adds a hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 6–9 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e1,625mm maximum opening and 722mm width\u003c\/li\u003e\n  \u003cli\u003eTine-style legs with 12mm inner and 15mm outer tines\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep pinching together as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the cylinder overextending\u003c\/li\u003e\n  \u003cli\u003eRuns off a single double-acting hydraulic circuit\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6–9 Tonne Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-SG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–9 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,625mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e722mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg tine thickness\u003c\/th\u003e\n\u003ctd\u003e12mm inner, 15mm outer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight (excluding headstock)\u003c\/th\u003e\n\u003ctd\u003e446kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuit\u003c\/th\u003e\n\u003ctd\u003eSingle double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eNone (2-way crosslink)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed selector grab is the cost-effective choice when you can line the machine up with the material. A rotating selector grab turns through 360°, so you can work in tight spots and place material precisely without repositioning, but it needs a second double-acting circuit. Compare both in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab runs off a single double-acting hydraulic circuit, at a working pressure of 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e6–9 Tonne Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a selector grab used for?\u003c\/h3\u003e\n\u003cp\u003eSelector grabs are built for demolition, sorting waste, material handling and processing stone or rock. The tine-style legs and hardened edges suit heavy-duty work as well as general material handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA single double-acting hydraulic circuit. The rotating selector grabs need two double-acting circuits, one more than this fixed model.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 6–9 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-6-tonne-excavator-selector-grab\"\u003e4–6 tonne selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/10-16-tonne-excavator-selector-grab\"\u003e10–16 tonne selector grab\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097191354717,"sku":"060-SG","price":3828.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/6-9-tonne-excavator-selector-grab.png?v=1790864917"},{"product_id":"10-16-tonne-excavator-selector-grab","title":"10–16 Tonne Excavator Selector Grab – 1,700mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e10–16 tonne excavator selector grab\u003c\/strong\u003e is a heavy-duty hydraulic sorting grab for demolition, material and waste handling, and stone or rock processing. It opens to 1,700mm, weighs 826kg without the headstock, and runs off a single double-acting hydraulic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIts toeplates pinch together for a tight grip and keep meeting even as the cutting edges wear. The reversible, bolt-on hardened cutting edges and tine-style legs are built to stay rigid in harsh environments, a pressure relief valve stops the cylinder putting too much force on the edges and legs, and manual stoppers protect the cylinder from overextension.\u003c\/p\u003e\n\n\u003cp\u003eThis fixed model uses a 2-way crosslink instead of a 360° rotator, which keeps the cost down. If you want to turn the grab to any angle, the \u003ca href=\"\/products\/12-15-tonne-rotating-excavator-selector-grab\"\u003e12–15 tonne rotating selector grab\u003c\/a\u003e adds a hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 10–16 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e1,700mm maximum opening and 900mm width\u003c\/li\u003e\n  \u003cli\u003eTine-style legs with 12mm inner and 20mm outer tines\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep pinching together as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the cylinder overextending\u003c\/li\u003e\n  \u003cli\u003eRuns off a single double-acting hydraulic circuit\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–16 Tonne Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-SG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–16 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,700mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg tine thickness\u003c\/th\u003e\n\u003ctd\u003e12mm inner, 20mm outer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight (excluding headstock)\u003c\/th\u003e\n\u003ctd\u003e826kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuit\u003c\/th\u003e\n\u003ctd\u003eSingle double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eNone (2-way crosslink)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed selector grab is the cost-effective choice when you can line the machine up with the material. A rotating selector grab turns through 360°, so you can work in tight spots and place material precisely without repositioning, but it needs a second double-acting circuit. Compare both in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab runs off a single double-acting hydraulic circuit, at a working pressure of 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–16 Tonne Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a selector grab used for?\u003c\/h3\u003e\n\u003cp\u003eSelector grabs are built for demolition, sorting waste, material handling and processing stone or rock. The tine-style legs and hardened edges suit heavy-duty work as well as general material handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA single double-acting hydraulic circuit. The rotating selector grabs need two double-acting circuits, one more than this fixed model.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–16 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/6-9-tonne-excavator-selector-grab\"\u003e6–9 tonne selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/16-26-tonne-excavator-selector-grab\"\u003e16–26 tonne selector grab\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097191453021,"sku":"100-SG","price":5508.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-16-tonne-excavator-selector-grab.png?v=1790864918"},{"product_id":"16-26-tonne-excavator-selector-grab","title":"16–26 Tonne Excavator Selector Grab – 1,900mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e16–26 tonne excavator selector grab\u003c\/strong\u003e is a heavy-duty hydraulic sorting grab for demolition, material and waste handling, and stone or rock processing. It opens to 1,900mm, weighs 1,115kg without the headstock, and runs off a single double-acting hydraulic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIts toeplates pinch together for a tight grip and keep meeting even as the cutting edges wear. The reversible, bolt-on hardened cutting edges and tine-style legs are built to stay rigid in harsh environments, a pressure relief valve stops the cylinder putting too much force on the edges and legs, and manual stoppers protect the cylinder from overextension.\u003c\/p\u003e\n\n\u003cp\u003eThis fixed model uses a 2-way crosslink instead of a 360° rotator, which keeps the cost down. If you want to turn the grab to any angle, the \u003ca href=\"\/products\/18-30-tonne-rotating-excavator-selector-grab\"\u003e18–30 tonne rotating selector grab\u003c\/a\u003e adds a hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 16–26 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e1,900mm maximum opening and 1,000mm width\u003c\/li\u003e\n  \u003cli\u003eTine-style legs with 20mm inner and 20mm outer tines\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep pinching together as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the cylinder overextending\u003c\/li\u003e\n  \u003cli\u003eRuns off a single double-acting hydraulic circuit\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e16–26 Tonne Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-SG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e16–26 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg tine thickness\u003c\/th\u003e\n\u003ctd\u003e20mm inner, 20mm outer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight (excluding headstock)\u003c\/th\u003e\n\u003ctd\u003e1,115kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuit\u003c\/th\u003e\n\u003ctd\u003eSingle double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eNone (2-way crosslink)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed selector grab is the cost-effective choice when you can line the machine up with the material. A rotating selector grab turns through 360°, so you can work in tight spots and place material precisely without repositioning, but it needs a second double-acting circuit. Compare both in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab runs off a single double-acting hydraulic circuit, at a working pressure of 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e16–26 Tonne Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a selector grab used for?\u003c\/h3\u003e\n\u003cp\u003eSelector grabs are built for demolition, sorting waste, material handling and processing stone or rock. The tine-style legs and hardened edges suit heavy-duty work as well as general material handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA single double-acting hydraulic circuit. The rotating selector grabs need two double-acting circuits, one more than this fixed model.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 16–26 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/10-16-tonne-excavator-selector-grab\"\u003e10–16 tonne selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/22-36-tonne-excavator-selector-grab\"\u003e22–36 tonne selector grab\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097191485789,"sku":"200-SG","price":6948.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/16-26-tonne-excavator-selector-grab.png?v=1790864918"},{"product_id":"22-36-tonne-excavator-selector-grab","title":"22–36 Tonne Excavator Selector Grab – 2,100mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e22–36 tonne excavator selector grab\u003c\/strong\u003e is a heavy-duty hydraulic sorting grab for demolition, material and waste handling, and stone or rock processing. It opens to 2,100mm and runs off a single double-acting hydraulic circuit.\u003c\/p\u003e\n\n\u003cp\u003eIts toeplates pinch together for a tight grip and keep meeting even as the cutting edges wear. The reversible, bolt-on hardened cutting edges and tine-style legs are built to stay rigid in harsh environments, a pressure relief valve stops the cylinder putting too much force on the edges and legs, and manual stoppers protect the cylinder from overextension.\u003c\/p\u003e\n\n\u003cp\u003eThis fixed model uses a 2-way crosslink instead of a 360° rotator, which keeps the cost down. If you want to turn the grab to any angle, the \u003ca href=\"\/products\/18-30-tonne-rotating-excavator-selector-grab\"\u003e18–30 tonne rotating selector grab\u003c\/a\u003e adds a hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 22–36 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e2,100mm maximum opening and 1,050mm width\u003c\/li\u003e\n  \u003cli\u003eTine-style legs with 20mm inner and 20mm outer tines\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep pinching together as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the cylinder overextending\u003c\/li\u003e\n  \u003cli\u003eRuns off a single double-acting hydraulic circuit\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e22–36 Tonne Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e300-SG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e22–36 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e2,100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1,050mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg tine thickness\u003c\/th\u003e\n\u003ctd\u003e20mm inner, 20mm outer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight (excluding headstock)\u003c\/th\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuit\u003c\/th\u003e\n\u003ctd\u003eSingle double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003eNone (2-way crosslink)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed selector grab is the cost-effective choice when you can line the machine up with the material. A rotating selector grab turns through 360°, so you can work in tight spots and place material precisely without repositioning, but it needs a second double-acting circuit. Compare both in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab runs off a single double-acting hydraulic circuit, at a working pressure of 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e22–36 Tonne Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is a selector grab used for?\u003c\/h3\u003e\n\u003cp\u003eSelector grabs are built for demolition, sorting waste, material handling and processing stone or rock. The tine-style legs and hardened edges suit heavy-duty work as well as general material handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eA single double-acting hydraulic circuit. The rotating selector grabs need two double-acting circuits, one more than this fixed model.\u003c\/p\u003e\n\n\u003ch3\u003eHow much does it weigh?\u003c\/h3\u003e\n\u003cp\u003eWe don't have a confirmed unit weight for this size yet, so \u003ca href=\"\/pages\/request-a-quote\"\u003eask us\u003c\/a\u003e and we'll get the figure for you.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 22–36 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/16-26-tonne-excavator-selector-grab\"\u003e16–26 tonne selector grab\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097214980445,"sku":"300-SG","price":8628.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/22-36-tonne-excavator-selector-grab.png?v=1790865211"},{"product_id":"1-2-2-tonne-rotating-excavator-selector-grab","title":"1–2.2 Tonne Rotating Excavator Selector Grab – 710mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e1–2.2 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 710mm, weighs 124kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. For a fixed selector grab, which needs only one circuit, see the full \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grab range\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 1–2.2 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e710mm maximum opening, 320mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1–2.2 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e010-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2.2 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e710mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e320mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e765mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e124kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.025m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1–2.2 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 1–2.2 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/1-8-3-5-tonne-rotating-excavator-selector-grab\"\u003e1.8–3.5 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097215177053,"sku":"010-RRG","price":3228.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/1-2-2-tonne-rotating-excavator-selector-grab.png?v=1790865212"},{"product_id":"1-8-3-5-tonne-rotating-excavator-selector-grab","title":"1.8–3.5 Tonne Rotating Excavator Selector Grab – 915mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e1.8–3.5 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 915mm, weighs 176kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/2-3-5-tonne-excavator-selector-grab\"\u003e2–3.5 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 1.8–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e915mm maximum opening, 400mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1.8–3.5 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1.8–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e915mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e990mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e176kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.06m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1.8–3.5 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 1.8–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/1-2-2-tonne-rotating-excavator-selector-grab\"\u003e1–2.2 tonne rotating selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/3-5-5-tonne-rotating-excavator-selector-grab\"\u003e3–5.5 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097215209821,"sku":"020-RRG","price":3708.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/1-8-3-5-tonne-rotating-excavator-selector-grab.png?v=1790865212"},{"product_id":"3-5-5-tonne-rotating-excavator-selector-grab","title":"3–5.5 Tonne Rotating Excavator Selector Grab – 1,175mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e3–5.5 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 1,175mm, weighs 272kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/4-6-tonne-excavator-selector-grab\"\u003e4–6 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 3–5.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e1,175mm maximum opening, 450mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e3–5.5 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e040-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e3–5.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,175mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,070mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e272kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.07m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e3–5.5 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 3–5.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/1-8-3-5-tonne-rotating-excavator-selector-grab\"\u003e1.8–3.5 tonne rotating selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/5-9-tonne-rotating-excavator-selector-grab\"\u003e5–9 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097215406429,"sku":"040-RRG","price":4548.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/3-5-5-tonne-rotating-excavator-selector-grab.png?v=1790865213"},{"product_id":"5-9-tonne-rotating-excavator-selector-grab","title":"5–9 Tonne Rotating Excavator Selector Grab – 1,280mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e5–9 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 1,280mm, weighs 412kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/6-9-tonne-excavator-selector-grab\"\u003e6–9 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 5–9 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e1,280mm maximum opening, 550mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e5–9 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e5–9 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,280mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e550mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,160mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e412kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.12m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e5–9 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 5–9 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/3-5-5-tonne-rotating-excavator-selector-grab\"\u003e3–5.5 tonne rotating selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/8-12-tonne-rotating-excavator-selector-grab\"\u003e8–12 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097215439197,"sku":"060-RRG","price":6588.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/5-9-tonne-rotating-excavator-selector-grab.png?v=1790865213"},{"product_id":"8-12-tonne-rotating-excavator-selector-grab","title":"8–12 Tonne Rotating Excavator Selector Grab – 1,400mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e8–12 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 1,400mm, weighs 600kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/10-16-tonne-excavator-selector-grab\"\u003e10–16 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 8–12 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e1,400mm maximum opening, 650mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e8–12 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e090-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e8–12 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e650mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,260mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e600kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.185m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e8–12 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 8–12 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/5-9-tonne-rotating-excavator-selector-grab\"\u003e5–9 tonne rotating selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/12-15-tonne-rotating-excavator-selector-grab\"\u003e12–15 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097226056029,"sku":"090-RRG","price":7548.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/8-12-tonne-rotating-excavator-selector-grab.png?v=1790865352"},{"product_id":"12-15-tonne-rotating-excavator-selector-grab","title":"12–15 Tonne Rotating Excavator Selector Grab – 1,550mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e12–15 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 1,550mm, weighs 862kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/10-16-tonne-excavator-selector-grab\"\u003e10–16 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 12–15 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e1,550mm maximum opening, 750mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12–15 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e12–15 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,550mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e862kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.27m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e12–15 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 12–15 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/8-12-tonne-rotating-excavator-selector-grab\"\u003e8–12 tonne rotating selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/15-20-tonne-rotating-excavator-selector-grab\"\u003e15–20 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097226088797,"sku":"100-RRG","price":9588.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/12-15-tonne-rotating-excavator-selector-grab.png?v=1790865352"},{"product_id":"15-20-tonne-rotating-excavator-selector-grab","title":"15–20 Tonne Rotating Excavator Selector Grab – 1,700mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e15–20 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 1,700mm, weighs 1,042kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/16-26-tonne-excavator-selector-grab\"\u003e16–26 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 15–20 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e1,700mm maximum opening, 850mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e15–20 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e150-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e15–20 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,700mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e850mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1,042kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.42m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e15–20 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 15–20 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/12-15-tonne-rotating-excavator-selector-grab\"\u003e12–15 tonne rotating selector grab\u003c\/a\u003e or the \u003ca href=\"\/products\/18-30-tonne-rotating-excavator-selector-grab\"\u003e18–30 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097226121565,"sku":"150-RRG","price":13188.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/15-20-tonne-rotating-excavator-selector-grab.png?v=1790865352"},{"product_id":"18-30-tonne-rotating-excavator-selector-grab","title":"18–30 Tonne Rotating Excavator Selector Grab – 1,960mm Opening","description":"\u003cp\u003eThe \u003cstrong\u003e18–30 tonne rotating excavator selector grab\u003c\/strong\u003e puts a 360° rotator on a heavy-duty sorting grab for demolition, waste handling, material processing and stone or rock handling. It opens to 1,960mm, weighs 1,560kg and turns to any angle, so you can work precisely in tight or awkward spots.\u003c\/p\u003e\n\n\u003cp\u003eReversible, bolt-on hardened cutting edges and perforated shell-style legs stand up to tough work, and the toeplates keep pinching together as the edges wear, so the grip stays consistent. A pressure relief valve stops excessive force damaging the cylinder, edges or legs, and manual stoppers stop the legs opening wider than the cylinder can safely take.\u003c\/p\u003e\n\n\u003cp\u003eIt needs two double-acting hydraulic circuits and comes with a headstock designed to fit your machine. If you don't need rotation, the \u003ca href=\"\/products\/16-26-tonne-excavator-selector-grab\"\u003e16–26 tonne selector grab\u003c\/a\u003e does the same job for less on a single circuit.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 18–30 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e360° hydraulic rotator for precise placement\u003c\/li\u003e\n  \u003cli\u003e1,960mm maximum opening, 1,000mm leg width\u003c\/li\u003e\n  \u003cli\u003ePerforated shell-style legs\u003c\/li\u003e\n  \u003cli\u003eReversible, bolt-on hardened cutting edges\u003c\/li\u003e\n  \u003cli\u003eToeplates that keep meeting as the edges wear\u003c\/li\u003e\n  \u003cli\u003ePressure relief valve protects the cylinder, edges and legs\u003c\/li\u003e\n  \u003cli\u003eManual stoppers stop the legs opening wider than the cylinder can safely take\u003c\/li\u003e\n  \u003cli\u003eRuns off two double-acting hydraulic circuits\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e18–30 Tonne Rotating Selector Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-RRG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e18–30 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,960mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg width\u003c\/th\u003e\n\u003ctd\u003e1,000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e1,600mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1,560kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eGrab area\u003c\/th\u003e\n\u003ctd\u003e0.61m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating pressure\u003c\/th\u003e\n\u003ctd\u003e150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotation\u003c\/th\u003e\n\u003ctd\u003e360° hydraulic rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eTwo double-acting\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDemolition and strip-out work\u003c\/li\u003e\n  \u003cli\u003eSorting mixed waste and loading skips\u003c\/li\u003e\n  \u003cli\u003eMaterial handling on construction and recycling sites\u003c\/li\u003e\n  \u003cli\u003eStone and rock handling\u003c\/li\u003e\n  \u003cli\u003eHandling scrap and bulky debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Selector Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed grab can only work at the angle the dipper presents it. The rotator turns the whole grab through 360°, which pays off when you're sorting mixed material, placing loads precisely, loading skips and wagons, or working around obstacles. Compare fixed and rotating models in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs two double-acting hydraulic circuits, and the operating pressure is 150 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach rotating selector grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e18–30 Tonne Rotating Selector Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 360° rotator lets you turn the grab to match the material, work in tight spots and place loads precisely without repositioning the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eTwo double-acting hydraulic circuits. Send us details of your machine's auxiliary hydraulics and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock designed to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 18–30 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and hydraulic setup, and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/15-20-tonne-rotating-excavator-selector-grab\"\u003e15–20 tonne rotating selector grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eexcavator selector grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097227006301,"sku":"200-RRG","price":16788.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/18-30-tonne-rotating-excavator-selector-grab.png?v=1790865352"},{"product_id":"1-2-tonne-excavator-timber-grab","title":"1–2 Tonne Excavator Timber Grab","description":"\u003cp\u003eThe \u003cstrong\u003e1–2 tonne excavator timber grab\u003c\/strong\u003e is a heavy-duty hydraulic log grab built to work under an excavator. Its two interlocking arms, with hardened steel legs and cutting edge, make it far tougher than a free-hanging crane log grab, and it handles stumps, stones and rocks as well as logs.\u003c\/p\u003e\n\n\u003cp\u003eA continuous radius inside the legs and an asymmetric design roll logs into the centre of the grip, and the leg geometry and cylinder stroke let it hold even the smallest limbs tight against the housing to stop them slipping. The legs open wide but close very tight to the body.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it's supplied with a headstock to fit your machine. Choose with or without the rotator when you order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 1–2 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eTwo interlocking arms with hardened steel legs and cutting edge\u003c\/li\u003e\n  \u003cli\u003eContinuous-radius, asymmetric legs roll logs into the centre of the grip\u003c\/li\u003e\n  \u003cli\u003eHolds even the smallest limbs tight against the housing\u003c\/li\u003e\n  \u003cli\u003eOpens wide and closes tight to the body\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1–2 Tonne Timber Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e010-TG (with rotator: 010-TGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e54kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e50 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can line the grab up with each log and stack timber neatly without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForestry and woodland work\u003c\/li\u003e\n  \u003cli\u003eLoading, sorting and stacking logs\u003c\/li\u003e\n  \u003cli\u003eHandling timber after felling or thinning\u003c\/li\u003e\n  \u003cli\u003eClearing stumps, brash and debris\u003c\/li\u003e\n  \u003cli\u003eMoving stones and rocks on land clearance jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and it's rated at 200 bar and 50 l\/min. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach timber grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1–2 Tonne Timber Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eCan it handle stumps and rocks?\u003c\/h3\u003e\n\u003cp\u003eYes. It's optimised for logs, but the timber grab is also very effective for handling stumps, stones and rocks.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the rotator?\u003c\/h3\u003e\n\u003cp\u003eNot for most jobs. The 360° rotator lets you line the grab up with each log and lay timber in neat stacks without moving the machine, but it needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the rotator. It's rated at 200 bar and 50 l\/min.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 1–2 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-timber-grab\"\u003e2–3.5 tonne timber grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grabs\u003c\/a\u003e range. Cutting the timber first? Our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e cut stems in one bite and hold them as they cut.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097227039069,"sku":"010-TG","price":1308.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097227071837,"sku":"010-TGR","price":2748.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/1-2-tonne-excavator-timber-grab.png?v=1790865349"},{"product_id":"2-3-5-tonne-excavator-timber-grab","title":"2–3.5 Tonne Excavator Timber Grab","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne excavator timber grab\u003c\/strong\u003e is a heavy-duty hydraulic log grab built to work under an excavator. Its two interlocking arms, with hardened steel legs and cutting edge, make it far tougher than a free-hanging crane log grab, and it handles stumps, stones and rocks as well as logs.\u003c\/p\u003e\n\n\u003cp\u003eA continuous radius inside the legs and an asymmetric design roll logs into the centre of the grip, and the leg geometry and cylinder stroke let it hold even the smallest limbs tight against the housing to stop them slipping. The legs open wide but close very tight to the body.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it's supplied with a headstock to fit your machine. Choose with or without the rotator when you order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 2–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eTwo interlocking arms with hardened steel legs and cutting edge\u003c\/li\u003e\n  \u003cli\u003eContinuous-radius, asymmetric legs roll logs into the centre of the grip\u003c\/li\u003e\n  \u003cli\u003eHolds even the smallest limbs tight against the housing\u003c\/li\u003e\n  \u003cli\u003eOpens wide and closes tight to the body\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Timber Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-TG-1 (with rotator: 020-TG-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e73kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e50 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can line the grab up with each log and stack timber neatly without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForestry and woodland work\u003c\/li\u003e\n  \u003cli\u003eLoading, sorting and stacking logs\u003c\/li\u003e\n  \u003cli\u003eHandling timber after felling or thinning\u003c\/li\u003e\n  \u003cli\u003eClearing stumps, brash and debris\u003c\/li\u003e\n  \u003cli\u003eMoving stones and rocks on land clearance jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and it's rated at 200 bar and 50 l\/min. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach timber grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Timber Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eCan it handle stumps and rocks?\u003c\/h3\u003e\n\u003cp\u003eYes. It's optimised for logs, but the timber grab is also very effective for handling stumps, stones and rocks.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the rotator?\u003c\/h3\u003e\n\u003cp\u003eNot for most jobs. The 360° rotator lets you line the grab up with each log and lay timber in neat stacks without moving the machine, but it needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the rotator. It's rated at 200 bar and 50 l\/min.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/1-2-tonne-excavator-timber-grab\"\u003e1–2 tonne timber grab\u003c\/a\u003e or the \u003ca href=\"\/products\/4-6-tonne-excavator-timber-grab\"\u003e4–6 tonne timber grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grabs\u003c\/a\u003e range. Cutting the timber first? Our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e cut stems in one bite and hold them as they cut.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097234805085,"sku":"020-TG-1","price":1788.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097234837853,"sku":"020-TG-2","price":4068.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-excavator-timber-grab.png?v=1790865470"},{"product_id":"4-6-tonne-excavator-timber-grab","title":"4–6 Tonne Excavator Timber Grab","description":"\u003cp\u003eThe \u003cstrong\u003e4–6 tonne excavator timber grab\u003c\/strong\u003e is a heavy-duty hydraulic log grab built to work under an excavator. Its two interlocking arms, with hardened steel legs and cutting edge, make it far tougher than a free-hanging crane log grab, and it handles stumps, stones and rocks as well as logs.\u003c\/p\u003e\n\n\u003cp\u003eA continuous radius inside the legs and an asymmetric design roll logs into the centre of the grip, and the leg geometry and cylinder stroke let it hold even the smallest limbs tight against the housing to stop them slipping. The legs open wide but close very tight to the body.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it's supplied with a headstock to fit your machine. Choose with or without the rotator when you order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 4–6 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eTwo interlocking arms with hardened steel legs and cutting edge\u003c\/li\u003e\n  \u003cli\u003eContinuous-radius, asymmetric legs roll logs into the centre of the grip\u003c\/li\u003e\n  \u003cli\u003eHolds even the smallest limbs tight against the housing\u003c\/li\u003e\n  \u003cli\u003eOpens wide and closes tight to the body\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–6 Tonne Timber Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e040-TG (with rotator: 040-TGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–6 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e176kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e50 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can line the grab up with each log and stack timber neatly without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForestry and woodland work\u003c\/li\u003e\n  \u003cli\u003eLoading, sorting and stacking logs\u003c\/li\u003e\n  \u003cli\u003eHandling timber after felling or thinning\u003c\/li\u003e\n  \u003cli\u003eClearing stumps, brash and debris\u003c\/li\u003e\n  \u003cli\u003eMoving stones and rocks on land clearance jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and it's rated at 200 bar and 50 l\/min. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach timber grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–6 Tonne Timber Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eCan it handle stumps and rocks?\u003c\/h3\u003e\n\u003cp\u003eYes. It's optimised for logs, but the timber grab is also very effective for handling stumps, stones and rocks.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the rotator?\u003c\/h3\u003e\n\u003cp\u003eNot for most jobs. The 360° rotator lets you line the grab up with each log and lay timber in neat stacks without moving the machine, but it needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the rotator. It's rated at 200 bar and 50 l\/min.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–6 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-timber-grab\"\u003e2–3.5 tonne timber grab\u003c\/a\u003e or the \u003ca href=\"\/products\/6-10-tonne-excavator-timber-grab\"\u003e6–10 tonne timber grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grabs\u003c\/a\u003e range. Cutting the timber first? Our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e cut stems in one bite and hold them as they cut.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097234936157,"sku":"040-TG","price":2148.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097234968925,"sku":"040-TGR","price":4548.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-6-tonne-excavator-timber-grab.png?v=1790865472"},{"product_id":"6-10-tonne-excavator-timber-grab","title":"6–10 Tonne Excavator Timber Grab","description":"\u003cp\u003eThe \u003cstrong\u003e6–10 tonne excavator timber grab\u003c\/strong\u003e is a heavy-duty hydraulic log grab built to work under an excavator. Its two interlocking arms, with hardened steel legs and cutting edge, make it far tougher than a free-hanging crane log grab, and it handles stumps, stones and rocks as well as logs.\u003c\/p\u003e\n\n\u003cp\u003eA continuous radius inside the legs and an asymmetric design roll logs into the centre of the grip, and the leg geometry and cylinder stroke let it hold even the smallest limbs tight against the housing to stop them slipping. The legs open wide but close very tight to the body.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it's supplied with a headstock to fit your machine. Choose with or without the rotator when you order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 6–10 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eTwo interlocking arms with hardened steel legs and cutting edge\u003c\/li\u003e\n  \u003cli\u003eContinuous-radius, asymmetric legs roll logs into the centre of the grip\u003c\/li\u003e\n  \u003cli\u003eHolds even the smallest limbs tight against the housing\u003c\/li\u003e\n  \u003cli\u003eOpens wide and closes tight to the body\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6–10 Tonne Timber Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-TG (with rotator: 060-TGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–10 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e350kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e50 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can line the grab up with each log and stack timber neatly without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForestry and woodland work\u003c\/li\u003e\n  \u003cli\u003eLoading, sorting and stacking logs\u003c\/li\u003e\n  \u003cli\u003eHandling timber after felling or thinning\u003c\/li\u003e\n  \u003cli\u003eClearing stumps, brash and debris\u003c\/li\u003e\n  \u003cli\u003eMoving stones and rocks on land clearance jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and it's rated at 200 bar and 50 l\/min. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach timber grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e6–10 Tonne Timber Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eCan it handle stumps and rocks?\u003c\/h3\u003e\n\u003cp\u003eYes. It's optimised for logs, but the timber grab is also very effective for handling stumps, stones and rocks.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the rotator?\u003c\/h3\u003e\n\u003cp\u003eNot for most jobs. The 360° rotator lets you line the grab up with each log and lay timber in neat stacks without moving the machine, but it needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the rotator. It's rated at 200 bar and 50 l\/min.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 6–10 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-6-tonne-excavator-timber-grab\"\u003e4–6 tonne timber grab\u003c\/a\u003e or the \u003ca href=\"\/products\/10-16-tonne-excavator-timber-grab\"\u003e10–16 tonne timber grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grabs\u003c\/a\u003e range. Cutting the timber first? Our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e cut stems in one bite and hold them as they cut.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097235001693,"sku":"060-TG","price":2988.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097235034461,"sku":"060-TGR","price":6588.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/6-10-tonne-excavator-timber-grab.png?v=1790865470"},{"product_id":"10-16-tonne-excavator-timber-grab","title":"10–16 Tonne Excavator Timber Grab","description":"\u003cp\u003eThe \u003cstrong\u003e10–16 tonne excavator timber grab\u003c\/strong\u003e is a heavy-duty hydraulic log grab built to work under an excavator. Its two interlocking arms, with hardened steel legs and cutting edge, make it far tougher than a free-hanging crane log grab, and it handles stumps, stones and rocks as well as logs.\u003c\/p\u003e\n\n\u003cp\u003eA continuous radius inside the legs and an asymmetric design roll logs into the centre of the grip, and the leg geometry and cylinder stroke let it hold even the smallest limbs tight against the housing to stop them slipping. The legs open wide but close very tight to the body.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it's supplied with a headstock to fit your machine. Choose with or without the rotator when you order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 10–16 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eTwo interlocking arms with hardened steel legs and cutting edge\u003c\/li\u003e\n  \u003cli\u003eContinuous-radius, asymmetric legs roll logs into the centre of the grip\u003c\/li\u003e\n  \u003cli\u003eHolds even the smallest limbs tight against the housing\u003c\/li\u003e\n  \u003cli\u003eOpens wide and closes tight to the body\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–16 Tonne Timber Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-TG (with rotator: 100-TGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–16 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e514kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e50 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can line the grab up with each log and stack timber neatly without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForestry and woodland work\u003c\/li\u003e\n  \u003cli\u003eLoading, sorting and stacking logs\u003c\/li\u003e\n  \u003cli\u003eHandling timber after felling or thinning\u003c\/li\u003e\n  \u003cli\u003eClearing stumps, brash and debris\u003c\/li\u003e\n  \u003cli\u003eMoving stones and rocks on land clearance jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and it's rated at 200 bar and 50 l\/min. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach timber grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–16 Tonne Timber Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eCan it handle stumps and rocks?\u003c\/h3\u003e\n\u003cp\u003eYes. It's optimised for logs, but the timber grab is also very effective for handling stumps, stones and rocks.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the rotator?\u003c\/h3\u003e\n\u003cp\u003eNot for most jobs. The 360° rotator lets you line the grab up with each log and lay timber in neat stacks without moving the machine, but it needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the rotator. It's rated at 200 bar and 50 l\/min.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–16 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/6-10-tonne-excavator-timber-grab\"\u003e6–10 tonne timber grab\u003c\/a\u003e or the \u003ca href=\"\/products\/17-22-tonne-excavator-timber-grab\"\u003e17–22 tonne timber grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grabs\u003c\/a\u003e range. Cutting the timber first? Our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e cut stems in one bite and hold them as they cut.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097235132765,"sku":"100-TG","price":4188.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097235165533,"sku":"100-TGR","price":9228.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-16-tonne-excavator-timber-grab.png?v=1790865471"},{"product_id":"17-22-tonne-excavator-timber-grab","title":"17–22 Tonne Excavator Timber Grab","description":"\u003cp\u003eThe \u003cstrong\u003e17–22 tonne excavator timber grab\u003c\/strong\u003e is a heavy-duty hydraulic log grab built to work under an excavator. Its two interlocking arms, with hardened steel legs and cutting edge, make it far tougher than a free-hanging crane log grab, and it handles stumps, stones and rocks as well as logs.\u003c\/p\u003e\n\n\u003cp\u003eA continuous radius inside the legs and an asymmetric design roll logs into the centre of the grip, and the leg geometry and cylinder stroke let it hold even the smallest limbs tight against the housing to stop them slipping. The legs open wide but close very tight to the body.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it's supplied with a headstock to fit your machine. Choose with or without the rotator when you order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 17–22 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eTwo interlocking arms with hardened steel legs and cutting edge\u003c\/li\u003e\n  \u003cli\u003eContinuous-radius, asymmetric legs roll logs into the centre of the grip\u003c\/li\u003e\n  \u003cli\u003eHolds even the smallest limbs tight against the housing\u003c\/li\u003e\n  \u003cli\u003eOpens wide and closes tight to the body\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e17–22 Tonne Timber Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-TG (with rotator: 200-TGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e17–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e589kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e50 l\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can line the grab up with each log and stack timber neatly without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eForestry and woodland work\u003c\/li\u003e\n  \u003cli\u003eLoading, sorting and stacking logs\u003c\/li\u003e\n  \u003cli\u003eHandling timber after felling or thinning\u003c\/li\u003e\n  \u003cli\u003eClearing stumps, brash and debris\u003c\/li\u003e\n  \u003cli\u003eMoving stones and rocks on land clearance jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and it's rated at 200 bar and 50 l\/min. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach timber grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e17–22 Tonne Timber Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eCan it handle stumps and rocks?\u003c\/h3\u003e\n\u003cp\u003eYes. It's optimised for logs, but the timber grab is also very effective for handling stumps, stones and rocks.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the rotator?\u003c\/h3\u003e\n\u003cp\u003eNot for most jobs. The 360° rotator lets you line the grab up with each log and lay timber in neat stacks without moving the machine, but it needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the rotator. It's rated at 200 bar and 50 l\/min.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It's supplied with a headstock to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 17–22 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/10-16-tonne-excavator-timber-grab\"\u003e10–16 tonne timber grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grabs\u003c\/a\u003e range. Cutting the timber first? Our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e cut stems in one bite and hold them as they cut.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097235198301,"sku":"200-TG","price":5748.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097235231069,"sku":"200-TGR","price":11388.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/17-22-tonne-excavator-timber-grab.png?v=1790865472"},{"product_id":"2-3-5-tonne-excavator-folding-grab","title":"2–3.5 Tonne Excavator Folding Grab","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne excavator folding grab\u003c\/strong\u003e is a heavy-duty hydraulic grab with 7 interlocking HB400 steel tines, 3 on one side and 4 on the other. It sits between a manual grapple and a selector grab: fully hydraulic, so it moves more freely and accurately than a manual grapple, with more points of contact than a selector grab.\u003c\/p\u003e\n\n\u003cp\u003eThe interlocking tines work together to hold material tight against the grab housing, which cuts the risk of slippage. That makes it ideal for logs, stumps, brash and forest debris, and it also handles heavy material like stone and scrap metal.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it comes with a headstock tailored to fit your machine.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 2–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e7 interlocking HB400 abrasion-resistant tines, 3 on one side and 4 on the other\u003c\/li\u003e\n  \u003cli\u003ePulls material in tight against the grab body to stop it slipping\u003c\/li\u003e\n  \u003cli\u003e875mm maximum opening\u003c\/li\u003e\n  \u003cli\u003eFull hydraulic control, unlike a manual grapple\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Folding Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-FG (with rotator: 020-FGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e875mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e630mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e735mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e200kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTines\u003c\/th\u003e\n\u003ctd\u003e7 interlocking HB400 abrasion-resistant tines (3 + 4)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can place material precisely without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHandling logs, stumps and forest debris\u003c\/li\u003e\n  \u003cli\u003eMoving brash and timber on land clearance jobs\u003c\/li\u003e\n  \u003cli\u003eHandling stone and rocks\u003c\/li\u003e\n  \u003cli\u003eMoving scrap and other bulky debris\u003c\/li\u003e\n  \u003cli\u003eLoading skips and trailers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and works at 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach folding grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Folding Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eHow is a folding grab different from a manual grapple?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple works off the dipper cylinder with its inner jaw locked in place, which limits how it moves. The folding grab uses your excavator's hydraulics, so it opens and closes independently and moves more freely and accurately.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it different from a selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 7 interlocking tines give it more points of contact than a selector grab, so it holds logs, brash and irregular material tight against its body.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the 360° rotator.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock tailored to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/4-6-tonne-excavator-folding-grab\"\u003e4–6 tonne folding grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097250664797,"sku":"020-FG","price":2988.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097250697565,"sku":"020-FGR","price":5268.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-excavator-folding-grab.png?v=1790865608"},{"product_id":"4-6-tonne-excavator-folding-grab","title":"4–6 Tonne Excavator Folding Grab","description":"\u003cp\u003eThe \u003cstrong\u003e4–6 tonne excavator folding grab\u003c\/strong\u003e is a heavy-duty hydraulic grab with 7 interlocking HB400 steel tines, 3 on one side and 4 on the other. It sits between a manual grapple and a selector grab: fully hydraulic, so it moves more freely and accurately than a manual grapple, with more points of contact than a selector grab.\u003c\/p\u003e\n\n\u003cp\u003eThe interlocking tines work together to hold material tight against the grab housing, which cuts the risk of slippage. That makes it ideal for logs, stumps, brash and forest debris, and it also handles heavy material like stone and scrap metal.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it comes with a headstock tailored to fit your machine.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 4–6 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e7 interlocking HB400 abrasion-resistant tines, 3 on one side and 4 on the other\u003c\/li\u003e\n  \u003cli\u003ePulls material in tight against the grab body to stop it slipping\u003c\/li\u003e\n  \u003cli\u003e875mm maximum opening\u003c\/li\u003e\n  \u003cli\u003eFull hydraulic control, unlike a manual grapple\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–6 Tonne Folding Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e040-FG (with rotator: 040-FGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–6 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e875mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e720mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e735mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e220kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTines\u003c\/th\u003e\n\u003ctd\u003e7 interlocking HB400 abrasion-resistant tines (3 + 4)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can place material precisely without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHandling logs, stumps and forest debris\u003c\/li\u003e\n  \u003cli\u003eMoving brash and timber on land clearance jobs\u003c\/li\u003e\n  \u003cli\u003eHandling stone and rocks\u003c\/li\u003e\n  \u003cli\u003eMoving scrap and other bulky debris\u003c\/li\u003e\n  \u003cli\u003eLoading skips and trailers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and works at 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach folding grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–6 Tonne Folding Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eHow is a folding grab different from a manual grapple?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple works off the dipper cylinder with its inner jaw locked in place, which limits how it moves. The folding grab uses your excavator's hydraulics, so it opens and closes independently and moves more freely and accurately.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it different from a selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 7 interlocking tines give it more points of contact than a selector grab, so it holds logs, brash and irregular material tight against its body.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the 360° rotator.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock tailored to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–6 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-folding-grab\"\u003e2–3.5 tonne folding grab\u003c\/a\u003e or the \u003ca href=\"\/products\/6-10-tonne-excavator-folding-grab\"\u003e6–10 tonne folding grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097250763101,"sku":"040-FG","price":3588.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097250795869,"sku":"040-FGR","price":5988.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-6-tonne-excavator-folding-grab.png?v=1790865607"},{"product_id":"6-10-tonne-excavator-folding-grab","title":"6–10 Tonne Excavator Folding Grab","description":"\u003cp\u003eThe \u003cstrong\u003e6–10 tonne excavator folding grab\u003c\/strong\u003e is a heavy-duty hydraulic grab with 7 interlocking HB400 steel tines, 3 on one side and 4 on the other. It sits between a manual grapple and a selector grab: fully hydraulic, so it moves more freely and accurately than a manual grapple, with more points of contact than a selector grab.\u003c\/p\u003e\n\n\u003cp\u003eThe interlocking tines work together to hold material tight against the grab housing, which cuts the risk of slippage. That makes it ideal for logs, stumps, brash and forest debris, and it also handles heavy material like stone and scrap metal.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it comes with a headstock tailored to fit your machine.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 6–10 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e7 interlocking HB400 abrasion-resistant tines, 3 on one side and 4 on the other\u003c\/li\u003e\n  \u003cli\u003ePulls material in tight against the grab body to stop it slipping\u003c\/li\u003e\n  \u003cli\u003e875mm maximum opening\u003c\/li\u003e\n  \u003cli\u003eFull hydraulic control, unlike a manual grapple\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6–10 Tonne Folding Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-FG (with rotator: 060-FGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–10 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e875mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e720mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e340kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTines\u003c\/th\u003e\n\u003ctd\u003e7 interlocking HB400 abrasion-resistant tines (3 + 4)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can place material precisely without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHandling logs, stumps and forest debris\u003c\/li\u003e\n  \u003cli\u003eMoving brash and timber on land clearance jobs\u003c\/li\u003e\n  \u003cli\u003eHandling stone and rocks\u003c\/li\u003e\n  \u003cli\u003eMoving scrap and other bulky debris\u003c\/li\u003e\n  \u003cli\u003eLoading skips and trailers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and works at 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach folding grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e6–10 Tonne Folding Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eHow is a folding grab different from a manual grapple?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple works off the dipper cylinder with its inner jaw locked in place, which limits how it moves. The folding grab uses your excavator's hydraulics, so it opens and closes independently and moves more freely and accurately.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it different from a selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 7 interlocking tines give it more points of contact than a selector grab, so it holds logs, brash and irregular material tight against its body.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the 360° rotator.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock tailored to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 6–10 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-6-tonne-excavator-folding-grab\"\u003e4–6 tonne folding grab\u003c\/a\u003e or the \u003ca href=\"\/products\/10-16-tonne-excavator-folding-grab\"\u003e10–16 tonne folding grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097250861405,"sku":"060-FG","price":3828.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097250894173,"sku":"060-FGR","price":7428.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/6-10-tonne-excavator-folding-grab.png?v=1790865608"},{"product_id":"10-16-tonne-excavator-folding-grab","title":"10–16 Tonne Excavator Folding Grab","description":"\u003cp\u003eThe \u003cstrong\u003e10–16 tonne excavator folding grab\u003c\/strong\u003e is a heavy-duty hydraulic grab with 7 interlocking HB400 steel tines, 3 on one side and 4 on the other. It sits between a manual grapple and a selector grab: fully hydraulic, so it moves more freely and accurately than a manual grapple, with more points of contact than a selector grab.\u003c\/p\u003e\n\n\u003cp\u003eThe interlocking tines work together to hold material tight against the grab housing, which cuts the risk of slippage. That makes it ideal for logs, stumps, brash and forest debris, and it also handles heavy material like stone and scrap metal.\u003c\/p\u003e\n\n\u003cp\u003eIt runs off one double-acting hydraulic circuit, or two if you add the 360° rotator, and it comes with a headstock tailored to fit your machine.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 10–16 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e7 interlocking HB400 abrasion-resistant tines, 3 on one side and 4 on the other\u003c\/li\u003e\n  \u003cli\u003ePulls material in tight against the grab body to stop it slipping\u003c\/li\u003e\n  \u003cli\u003e1,483mm maximum opening\u003c\/li\u003e\n  \u003cli\u003eFull hydraulic control, unlike a manual grapple\u003c\/li\u003e\n  \u003cli\u003eOptional 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eOne double-acting circuit, or two with the rotator\u003c\/li\u003e\n  \u003cli\u003eSupplied with a headstock to fit your machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–16 Tonne Folding Grab Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-FG (with rotator: 100-FGR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–16 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum opening\u003c\/th\u003e\n\u003ctd\u003e1,483mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e895mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1,055mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e770kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePressure\u003c\/th\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTines\u003c\/th\u003e\n\u003ctd\u003e7 interlocking HB400 abrasion-resistant tines (3 + 4)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic circuits\u003c\/th\u003e\n\u003ctd\u003eOne double-acting (two with the rotator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eOptional 360° rotator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSupplied with a headstock to fit your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWith or Without the Rotator?\u003c\/h2\u003e\n\n\u003cp\u003eWithout the rotator, the grab costs less and runs on one circuit. The rotator version turns through 360°, so you can place material precisely without repositioning the machine. It needs a second double-acting circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHandling logs, stumps and forest debris\u003c\/li\u003e\n  \u003cli\u003eMoving brash and timber on land clearance jobs\u003c\/li\u003e\n  \u003cli\u003eHandling stone and rocks\u003c\/li\u003e\n  \u003cli\u003eMoving scrap and other bulky debris\u003c\/li\u003e\n  \u003cli\u003eLoading skips and trailers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe grab needs one double-acting hydraulic circuit, or two with the rotator, and works at 200 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails of your auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach folding grab is supplied with a headstock to suit your confirmed machine and hitch. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grab for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–16 Tonne Folding Grab FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eHow is a folding grab different from a manual grapple?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple works off the dipper cylinder with its inner jaw locked in place, which limits how it moves. The folding grab uses your excavator's hydraulics, so it opens and closes independently and moves more freely and accurately.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it different from a selector grab?\u003c\/h3\u003e\n\u003cp\u003eThe 7 interlocking tines give it more points of contact than a selector grab, so it holds logs, brash and irregular material tight against its body.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic circuit, or two if you choose the 360° rotator.\u003c\/p\u003e\n\n\u003ch3\u003eIs the headstock included?\u003c\/h3\u003e\n\u003cp\u003eYes. It comes with a headstock tailored to fit your machine, so send us your excavator and hitch details when you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–16 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model and hitch details and we'll confirm fitment before the grab is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/6-10-tonne-excavator-folding-grab\"\u003e6–10 tonne folding grab\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Without rotator","offer_id":66097250959709,"sku":"100-FG","price":5388.0,"currency_code":"GBP","in_stock":true},{"title":"With 360° rotator","offer_id":66097250992477,"sku":"100-FGR","price":10428.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-16-tonne-excavator-folding-grab.png?v=1790865608"},{"product_id":"1-2-tonne-excavator-manual-grapple","title":"1–2 Tonne Excavator Manual Grapple","description":"\u003cp\u003eThe \u003cstrong\u003e1–2 tonne excavator manual grapple\u003c\/strong\u003e is a mechanical grab for land clearance, skip sorting and general forestry work. It uses your dipper cylinder to open and close, so it needs no hydraulics at all, which makes it a much more cost-effective way to start grabbing than a hydraulic grab.\u003c\/p\u003e\n\n\u003cp\u003eSolid tines give it the strength for timber, brash and bulky material, and with no hydraulic parts there's no risk of hydraulic failure or costly downtime. It's often one of the first attachments operators add after their bucket set.\u003c\/p\u003e\n\n\u003cp\u003eIt's supplied as a kit, with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs and delivered, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 1–2 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eNo hydraulics needed: opens and closes with the dipper cylinder\u003c\/li\u003e\n  \u003cli\u003eSolid tine construction for strength and durability\u003c\/li\u003e\n  \u003cli\u003eSupplied as a kit with a 3-position weld-on pad and a solid 16mm connecting bar\u003c\/li\u003e\n  \u003cli\u003eFitted with the brackets your machine needs before delivery\u003c\/li\u003e\n  \u003cli\u003eConnects to your machine or quick coupler once the pad is welded on\u003c\/li\u003e\n  \u003cli\u003eNo hydraulic parts to fail, so no hydraulic downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1–2 Tonne Manual Grapple Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e010-MG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e70kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone, uses the dipper cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupplied with\u003c\/th\u003e\n\u003ctd\u003e3-position pad to weld to your dipper arm and a solid 16mm connecting bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance\u003c\/li\u003e\n  \u003cli\u003eSkip sorting\u003c\/li\u003e\n  \u003cli\u003eGeneral forestry work\u003c\/li\u003e\n  \u003cli\u003eMoving timber and brash\u003c\/li\u003e\n  \u003cli\u003eHandling bulky material without hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManual Grapple or Hydraulic Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA manual grapple is the cost-effective choice and has nothing hydraulic to maintain, but its inner jaw is fixed, so it can't match the dexterity of a hydraulic grab. If you need to grip and release independently of the dipper, look at our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e or \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe 3-position pad needs welding to your dipper arm, so plan for a competent welder to fit it. Once the pad is on, the grapple connects to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003ePhotos of your dipper arm, if you can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach manual grapple is supplied as a kit, with brackets to suit your confirmed machine. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grapple for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1–2 Tonne Manual Grapple FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eDoes a manual grapple need hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It uses the dipper cylinder to open and close, so there are no hydraulic lines, valves or cylinders to fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eIt's supplied as a kit with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch3\u003eManual grapple or hydraulic grab?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple costs much less and has nothing hydraulic to go wrong, but its inner jaw is fixed, so it lacks some of the dexterity of a hydraulic grab. For full hydraulic control, see our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003efolding grabs\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 1–2 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your quick coupler details, and we'll confirm the right brackets before the grapple is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-manual-grapple\"\u003e2–3.5 tonne manual grapple\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eexcavator manual grapples\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097251025245,"sku":"010-MG","price":588.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/1-2-tonne-excavator-manual-grapple.png?v=1790865609"},{"product_id":"2-3-5-tonne-excavator-manual-grapple","title":"2–3.5 Tonne Excavator Manual Grapple","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne excavator manual grapple\u003c\/strong\u003e is a mechanical grab for land clearance, skip sorting and general forestry work. It uses your dipper cylinder to open and close, so it needs no hydraulics at all, which makes it a much more cost-effective way to start grabbing than a hydraulic grab.\u003c\/p\u003e\n\n\u003cp\u003eSolid tines give it the strength for timber, brash and bulky material, and with no hydraulic parts there's no risk of hydraulic failure or costly downtime. It's often one of the first attachments operators add after their bucket set.\u003c\/p\u003e\n\n\u003cp\u003eIt's supplied as a kit, with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs and delivered, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 2–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eNo hydraulics needed: opens and closes with the dipper cylinder\u003c\/li\u003e\n  \u003cli\u003eSolid tine construction for strength and durability\u003c\/li\u003e\n  \u003cli\u003eSupplied as a kit with a 3-position weld-on pad and a solid 16mm connecting bar\u003c\/li\u003e\n  \u003cli\u003eFitted with the brackets your machine needs before delivery\u003c\/li\u003e\n  \u003cli\u003eConnects to your machine or quick coupler once the pad is welded on\u003c\/li\u003e\n  \u003cli\u003eNo hydraulic parts to fail, so no hydraulic downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Manual Grapple Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-MG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e106kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone, uses the dipper cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupplied with\u003c\/th\u003e\n\u003ctd\u003e3-position pad to weld to your dipper arm and a solid 16mm connecting bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance\u003c\/li\u003e\n  \u003cli\u003eSkip sorting\u003c\/li\u003e\n  \u003cli\u003eGeneral forestry work\u003c\/li\u003e\n  \u003cli\u003eMoving timber and brash\u003c\/li\u003e\n  \u003cli\u003eHandling bulky material without hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManual Grapple or Hydraulic Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA manual grapple is the cost-effective choice and has nothing hydraulic to maintain, but its inner jaw is fixed, so it can't match the dexterity of a hydraulic grab. If you need to grip and release independently of the dipper, look at our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e or \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe 3-position pad needs welding to your dipper arm, so plan for a competent welder to fit it. Once the pad is on, the grapple connects to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003ePhotos of your dipper arm, if you can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach manual grapple is supplied as a kit, with brackets to suit your confirmed machine. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grapple for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Manual Grapple FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eDoes a manual grapple need hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It uses the dipper cylinder to open and close, so there are no hydraulic lines, valves or cylinders to fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eIt's supplied as a kit with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch3\u003eManual grapple or hydraulic grab?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple costs much less and has nothing hydraulic to go wrong, but its inner jaw is fixed, so it lacks some of the dexterity of a hydraulic grab. For full hydraulic control, see our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003efolding grabs\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your quick coupler details, and we'll confirm the right brackets before the grapple is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/1-2-tonne-excavator-manual-grapple\"\u003e1–2 tonne manual grapple\u003c\/a\u003e or the \u003ca href=\"\/products\/4-5-5-tonne-excavator-manual-grapple\"\u003e4–5.5 tonne manual grapple\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eexcavator manual grapples\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097269178717,"sku":"020-MG","price":792.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-excavator-manual-grapple.png?v=1790865731"},{"product_id":"4-5-5-tonne-excavator-manual-grapple","title":"4–5.5 Tonne Excavator Manual Grapple","description":"\u003cp\u003eThe \u003cstrong\u003e4–5.5 tonne excavator manual grapple\u003c\/strong\u003e is a mechanical grab for land clearance, skip sorting and general forestry work. It uses your dipper cylinder to open and close, so it needs no hydraulics at all, which makes it a much more cost-effective way to start grabbing than a hydraulic grab.\u003c\/p\u003e\n\n\u003cp\u003eSolid tines give it the strength for timber, brash and bulky material, and with no hydraulic parts there's no risk of hydraulic failure or costly downtime. It's often one of the first attachments operators add after their bucket set.\u003c\/p\u003e\n\n\u003cp\u003eIt's supplied as a kit, with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs and delivered, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 4–5.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eNo hydraulics needed: opens and closes with the dipper cylinder\u003c\/li\u003e\n  \u003cli\u003eSolid tine construction for strength and durability\u003c\/li\u003e\n  \u003cli\u003eSupplied as a kit with a 3-position weld-on pad and a solid 16mm connecting bar\u003c\/li\u003e\n  \u003cli\u003eFitted with the brackets your machine needs before delivery\u003c\/li\u003e\n  \u003cli\u003eConnects to your machine or quick coupler once the pad is welded on\u003c\/li\u003e\n  \u003cli\u003eNo hydraulic parts to fail, so no hydraulic downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–5.5 Tonne Manual Grapple Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e040-MG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–5.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e158kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone, uses the dipper cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupplied with\u003c\/th\u003e\n\u003ctd\u003e3-position pad to weld to your dipper arm and a solid 16mm connecting bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance\u003c\/li\u003e\n  \u003cli\u003eSkip sorting\u003c\/li\u003e\n  \u003cli\u003eGeneral forestry work\u003c\/li\u003e\n  \u003cli\u003eMoving timber and brash\u003c\/li\u003e\n  \u003cli\u003eHandling bulky material without hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManual Grapple or Hydraulic Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA manual grapple is the cost-effective choice and has nothing hydraulic to maintain, but its inner jaw is fixed, so it can't match the dexterity of a hydraulic grab. If you need to grip and release independently of the dipper, look at our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e or \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe 3-position pad needs welding to your dipper arm, so plan for a competent welder to fit it. Once the pad is on, the grapple connects to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003ePhotos of your dipper arm, if you can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach manual grapple is supplied as a kit, with brackets to suit your confirmed machine. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grapple for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–5.5 Tonne Manual Grapple FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eDoes a manual grapple need hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It uses the dipper cylinder to open and close, so there are no hydraulic lines, valves or cylinders to fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eIt's supplied as a kit with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch3\u003eManual grapple or hydraulic grab?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple costs much less and has nothing hydraulic to go wrong, but its inner jaw is fixed, so it lacks some of the dexterity of a hydraulic grab. For full hydraulic control, see our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003efolding grabs\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–5.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your quick coupler details, and we'll confirm the right brackets before the grapple is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-manual-grapple\"\u003e2–3.5 tonne manual grapple\u003c\/a\u003e or the \u003ca href=\"\/products\/6-10-tonne-excavator-manual-grapple\"\u003e6–10 tonne manual grapple\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eexcavator manual grapples\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097269244253,"sku":"040-MG","price":948.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-5-5-tonne-excavator-manual-grapple.png?v=1790865732"},{"product_id":"6-10-tonne-excavator-manual-grapple","title":"6–10 Tonne Excavator Manual Grapple","description":"\u003cp\u003eThe \u003cstrong\u003e6–10 tonne excavator manual grapple\u003c\/strong\u003e is a mechanical grab for land clearance, skip sorting and general forestry work. It uses your dipper cylinder to open and close, so it needs no hydraulics at all, which makes it a much more cost-effective way to start grabbing than a hydraulic grab.\u003c\/p\u003e\n\n\u003cp\u003eSolid tines give it the strength for timber, brash and bulky material, and with no hydraulic parts there's no risk of hydraulic failure or costly downtime. It's often one of the first attachments operators add after their bucket set.\u003c\/p\u003e\n\n\u003cp\u003eIt's supplied as a kit, with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs and delivered, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 6–10 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eNo hydraulics needed: opens and closes with the dipper cylinder\u003c\/li\u003e\n  \u003cli\u003eSolid tine construction for strength and durability\u003c\/li\u003e\n  \u003cli\u003eSupplied as a kit with a 3-position weld-on pad and a solid 16mm connecting bar\u003c\/li\u003e\n  \u003cli\u003eFitted with the brackets your machine needs before delivery\u003c\/li\u003e\n  \u003cli\u003eConnects to your machine or quick coupler once the pad is welded on\u003c\/li\u003e\n  \u003cli\u003eNo hydraulic parts to fail, so no hydraulic downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6–10 Tonne Manual Grapple Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-MG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–10 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e288kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone, uses the dipper cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupplied with\u003c\/th\u003e\n\u003ctd\u003e3-position pad to weld to your dipper arm and a solid 16mm connecting bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance\u003c\/li\u003e\n  \u003cli\u003eSkip sorting\u003c\/li\u003e\n  \u003cli\u003eGeneral forestry work\u003c\/li\u003e\n  \u003cli\u003eMoving timber and brash\u003c\/li\u003e\n  \u003cli\u003eHandling bulky material without hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManual Grapple or Hydraulic Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA manual grapple is the cost-effective choice and has nothing hydraulic to maintain, but its inner jaw is fixed, so it can't match the dexterity of a hydraulic grab. If you need to grip and release independently of the dipper, look at our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e or \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe 3-position pad needs welding to your dipper arm, so plan for a competent welder to fit it. Once the pad is on, the grapple connects to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003ePhotos of your dipper arm, if you can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach manual grapple is supplied as a kit, with brackets to suit your confirmed machine. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grapple for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e6–10 Tonne Manual Grapple FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eDoes a manual grapple need hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It uses the dipper cylinder to open and close, so there are no hydraulic lines, valves or cylinders to fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eIt's supplied as a kit with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch3\u003eManual grapple or hydraulic grab?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple costs much less and has nothing hydraulic to go wrong, but its inner jaw is fixed, so it lacks some of the dexterity of a hydraulic grab. For full hydraulic control, see our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003efolding grabs\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 6–10 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your quick coupler details, and we'll confirm the right brackets before the grapple is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-5-5-tonne-excavator-manual-grapple\"\u003e4–5.5 tonne manual grapple\u003c\/a\u003e or the \u003ca href=\"\/products\/10-14-tonne-excavator-manual-grapple\"\u003e10–14 tonne manual grapple\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eexcavator manual grapples\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097269309789,"sku":"060-MG","price":1476.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/6-10-tonne-excavator-manual-grapple.png?v=1790865732"},{"product_id":"10-14-tonne-excavator-manual-grapple","title":"10–14 Tonne Excavator Manual Grapple","description":"\u003cp\u003eThe \u003cstrong\u003e10–14 tonne excavator manual grapple\u003c\/strong\u003e is a mechanical grab for land clearance, skip sorting and general forestry work. It uses your dipper cylinder to open and close, so it needs no hydraulics at all, which makes it a much more cost-effective way to start grabbing than a hydraulic grab.\u003c\/p\u003e\n\n\u003cp\u003eSolid tines give it the strength for timber, brash and bulky material, and with no hydraulic parts there's no risk of hydraulic failure or costly downtime. It's often one of the first attachments operators add after their bucket set.\u003c\/p\u003e\n\n\u003cp\u003eIt's supplied as a kit, with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs and delivered, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 10–14 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eNo hydraulics needed: opens and closes with the dipper cylinder\u003c\/li\u003e\n  \u003cli\u003eSolid tine construction for strength and durability\u003c\/li\u003e\n  \u003cli\u003eSupplied as a kit with a 3-position weld-on pad and a solid 16mm connecting bar\u003c\/li\u003e\n  \u003cli\u003eFitted with the brackets your machine needs before delivery\u003c\/li\u003e\n  \u003cli\u003eConnects to your machine or quick coupler once the pad is welded on\u003c\/li\u003e\n  \u003cli\u003eNo hydraulic parts to fail, so no hydraulic downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–14 Tonne Manual Grapple Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-MG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–14 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e615kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone, uses the dipper cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupplied with\u003c\/th\u003e\n\u003ctd\u003e3-position pad to weld to your dipper arm and a solid 16mm connecting bar\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance\u003c\/li\u003e\n  \u003cli\u003eSkip sorting\u003c\/li\u003e\n  \u003cli\u003eGeneral forestry work\u003c\/li\u003e\n  \u003cli\u003eMoving timber and brash\u003c\/li\u003e\n  \u003cli\u003eHandling bulky material without hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManual Grapple or Hydraulic Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA manual grapple is the cost-effective choice and has nothing hydraulic to maintain, but its inner jaw is fixed, so it can't match the dexterity of a hydraulic grab. If you need to grip and release independently of the dipper, look at our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e or \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe 3-position pad needs welding to your dipper arm, so plan for a competent welder to fit it. Once the pad is on, the grapple connects to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003ePhotos of your dipper arm, if you can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach manual grapple is supplied as a kit, with brackets to suit your confirmed machine. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grapple for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–14 Tonne Manual Grapple FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eDoes a manual grapple need hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It uses the dipper cylinder to open and close, so there are no hydraulic lines, valves or cylinders to fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eIt's supplied as a kit with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch3\u003eManual grapple or hydraulic grab?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple costs much less and has nothing hydraulic to go wrong, but its inner jaw is fixed, so it lacks some of the dexterity of a hydraulic grab. For full hydraulic control, see our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003efolding grabs\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–14 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your quick coupler details, and we'll confirm the right brackets before the grapple is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/6-10-tonne-excavator-manual-grapple\"\u003e6–10 tonne manual grapple\u003c\/a\u003e or the \u003ca href=\"\/products\/15-30-tonne-excavator-manual-grapple\"\u003e15–30 tonne manual grapple\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eexcavator manual grapples\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66097269342557,"sku":"100-MG","price":2628.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-14-tonne-excavator-manual-grapple.webp?v=1790865735"},{"product_id":"15-30-tonne-excavator-manual-grapple","title":"15–30 Tonne Excavator Manual Grapple","description":"\u003cp\u003eThe \u003cstrong\u003e15–30 tonne excavator manual grapple\u003c\/strong\u003e is a mechanical grab for land clearance, skip sorting and general forestry work. It uses your dipper cylinder to open and close, so it needs no hydraulics at all, which makes it a much more cost-effective way to start grabbing than a hydraulic grab.\u003c\/p\u003e\n\n\u003cp\u003eSolid tines give it the strength for timber, brash and bulky material, and with no hydraulic parts there's no risk of hydraulic failure or costly downtime. It's often one of the first attachments operators add after their bucket set.\u003c\/p\u003e\n\n\u003cp\u003eIt's supplied as a kit, with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs and delivered, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 15–30 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eNo hydraulics needed: opens and closes with the dipper cylinder\u003c\/li\u003e\n  \u003cli\u003eSolid tine construction for strength and durability\u003c\/li\u003e\n  \u003cli\u003eSupplied as a kit with a 3-position weld-on pad and a solid 16mm connecting bar\u003c\/li\u003e\n  \u003cli\u003eFitted with the brackets your machine needs before delivery\u003c\/li\u003e\n  \u003cli\u003eConnects to your machine or quick coupler once the pad is welded on\u003c\/li\u003e\n  \u003cli\u003eNo hydraulic parts to fail, so no hydraulic downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e15–30 Tonne Manual Grapple Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-MG-WP \/ 200-MG-DM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e15–30 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLeg thickness\u003c\/th\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eAsk us\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone, uses the dipper cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSupplied with\u003c\/th\u003e\n\u003ctd\u003e3-position pad to weld to your dipper arm and a solid 16mm connecting bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLinkage options\u003c\/th\u003e\n\u003ctd\u003eWelded pins or direct mount\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance\u003c\/li\u003e\n  \u003cli\u003eSkip sorting\u003c\/li\u003e\n  \u003cli\u003eGeneral forestry work\u003c\/li\u003e\n  \u003cli\u003eMoving timber and brash\u003c\/li\u003e\n  \u003cli\u003eHandling bulky material without hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eManual Grapple or Hydraulic Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA manual grapple is the cost-effective choice and has nothing hydraulic to maintain, but its inner jaw is fixed, so it can't match the dexterity of a hydraulic grab. If you need to grip and release independently of the dipper, look at our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003eexcavator folding grabs\u003c\/a\u003e or \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe 3-position pad needs welding to your dipper arm, so plan for a competent welder to fit it. Once the pad is on, the grapple connects to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003ePhotos of your dipper arm, if you can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach manual grapple is supplied as a kit, with brackets to suit your confirmed machine. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the grapple for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e15–30 Tonne Manual Grapple FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eDoes a manual grapple need hydraulics?\u003c\/h3\u003e\n\u003cp\u003eNo. It uses the dipper cylinder to open and close, so there are no hydraulic lines, valves or cylinders to fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eIt's supplied as a kit with a 3-position pad to weld onto your dipper arm and a solid 16mm connecting bar. Once you've confirmed your machine details, the grab is fitted with the brackets it needs, so you just weld on the pad and connect it to your machine or quick coupler.\u003c\/p\u003e\n\n\u003ch3\u003eWelded pins or direct mount?\u003c\/h3\u003e\n\u003cp\u003eThis size is available with welded pins or as a direct mount, at the same price. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e which suits your machine and coupler before you order.\u003c\/p\u003e\n\n\u003ch3\u003eManual grapple or hydraulic grab?\u003c\/h3\u003e\n\u003cp\u003eA manual grapple costs much less and has nothing hydraulic to go wrong, but its inner jaw is fixed, so it lacks some of the dexterity of a hydraulic grab. For full hydraulic control, see our \u003ca href=\"\/collections\/excavator-folding-grabs\"\u003efolding grabs\u003c\/a\u003e, \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 15–30 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your quick coupler details, and we'll confirm the right brackets before the grapple is supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/10-14-tonne-excavator-manual-grapple\"\u003e10–14 tonne manual grapple\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-manual-grapples\"\u003eexcavator manual grapples\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Welded Pins","offer_id":66097269408093,"sku":"200-MG-WP","price":6780.0,"currency_code":"GBP","in_stock":true},{"title":"Direct Mount","offer_id":66097269440861,"sku":"200-MG-DM","price":6780.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/15-30-tonne-excavator-manual-grapple.webp?v=1790865734"},{"product_id":"1-2-tonne-excavator-thumb","title":"1–2 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e1–2 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (62kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (65kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 28° closed to 168° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e1–2 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e010-TH-M\u003c\/td\u003e\n\u003ctd\u003e010-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003ctd\u003e1–2 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e62kg\u003c\/td\u003e\n\u003ctd\u003e65kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 28° closed to 168° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e1–2 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 1–2 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-thumb\"\u003e2–3.5 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097283465565,"sku":"010-TH-M","price":354.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097283498333,"sku":"010-TH-H","price":660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/1-2-tonne-excavator-thumb.png?v=1790865844"},{"product_id":"2-3-5-tonne-excavator-thumb","title":"2–3.5 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (73kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (78kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 23° closed to 166° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-TH-M\u003c\/td\u003e\n\u003ctd\u003e020-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e73kg\u003c\/td\u003e\n\u003ctd\u003e78kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 23° closed to 166° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/1-2-tonne-excavator-thumb\"\u003e1–2 tonne excavator thumb\u003c\/a\u003e or the \u003ca href=\"\/products\/4-6-tonne-excavator-thumb\"\u003e4–6 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097283563869,"sku":"020-TH-M","price":516.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097283596637,"sku":"020-TH-H","price":900.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-excavator-thumb.png?v=1790865845"},{"product_id":"4-6-tonne-excavator-thumb","title":"4–6 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e4–6 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (98kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (97kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 23° closed to 173° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–6 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e040-TH-M\u003c\/td\u003e\n\u003ctd\u003e040-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–6 tonnes\u003c\/td\u003e\n\u003ctd\u003e4–6 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e98kg\u003c\/td\u003e\n\u003ctd\u003e97kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 23° closed to 173° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–6 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–6 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-thumb\"\u003e2–3.5 tonne excavator thumb\u003c\/a\u003e or the \u003ca href=\"\/products\/6-10-tonne-excavator-thumb\"\u003e6–10 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097283629405,"sku":"040-TH-M","price":660.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097283662173,"sku":"040-TH-H","price":1068.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-6-tonne-excavator-thumb.png?v=1790865846"},{"product_id":"6-10-tonne-excavator-thumb","title":"6–10 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e6–10 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (147kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (138kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 23° closed to 173° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e6–10 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-TH-M\u003c\/td\u003e\n\u003ctd\u003e060-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e6–10 tonnes\u003c\/td\u003e\n\u003ctd\u003e6–10 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e147kg\u003c\/td\u003e\n\u003ctd\u003e138kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 23° closed to 173° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e6–10 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 6–10 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-6-tonne-excavator-thumb\"\u003e4–6 tonne excavator thumb\u003c\/a\u003e or the \u003ca href=\"\/products\/10-15-tonne-excavator-thumb\"\u003e10–15 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097283924317,"sku":"060-TH-M","price":780.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097283957085,"sku":"060-TH-H","price":1380.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/6-10-tonne-excavator-thumb.png?v=1790865844"},{"product_id":"10-15-tonne-excavator-thumb","title":"10–15 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e10–15 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (299kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (277kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 21° closed to 171° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–15 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-TH-M\u003c\/td\u003e\n\u003ctd\u003e100-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003ctd\u003e10–15 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e299kg\u003c\/td\u003e\n\u003ctd\u003e277kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 21° closed to 171° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–15 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–15 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/6-10-tonne-excavator-thumb\"\u003e6–10 tonne excavator thumb\u003c\/a\u003e or the \u003ca href=\"\/products\/15-18-tonne-excavator-thumb\"\u003e15–18 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097298342237,"sku":"100-TH-M","price":1548.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097298375005,"sku":"100-TH-H","price":2268.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-15-tonne-excavator-thumb.png?v=1790865929"},{"product_id":"15-18-tonne-excavator-thumb","title":"15–18 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e15–18 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (326kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (313kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 21° closed to 174° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e15–18 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e150-TH-M\u003c\/td\u003e\n\u003ctd\u003e150-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e15–18 tonnes\u003c\/td\u003e\n\u003ctd\u003e15–18 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e326kg\u003c\/td\u003e\n\u003ctd\u003e313kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 21° closed to 174° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e15–18 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 15–18 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/10-15-tonne-excavator-thumb\"\u003e10–15 tonne excavator thumb\u003c\/a\u003e or the \u003ca href=\"\/products\/18-25-tonne-excavator-thumb\"\u003e18–25 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097298440541,"sku":"150-TH-M","price":1740.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097298473309,"sku":"150-TH-H","price":2508.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/15-18-tonne-excavator-thumb.png?v=1790865929"},{"product_id":"18-25-tonne-excavator-thumb","title":"18–25 Tonne Excavator Thumb – Manual or Hydraulic","description":"\u003cp\u003eThe \u003cstrong\u003e18–25 tonne excavator thumb\u003c\/strong\u003e turns your bucket into a grab, so you can pick up logs, stumps, boulders and debris without uncoupling for a dedicated grapple. It works with digging buckets, grading buckets and land rakes, and tucks neatly against the dipper arm when you don't need it. Choose a manual or hydraulic thumb.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManual thumb (367kg):\u003c\/strong\u003e no hydraulics needed. Release it from its idle position and lock it into one of three working positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydraulic thumb (377kg):\u003c\/strong\u003e runs off one double-acting hydraulic service and works from 20° closed to 174° open, so you can grip and release from the cab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so you can position the thumb to work with a deep digging bucket or a shallow grading bucket. The design has been stress-tested, with steel thicknesses chosen to balance strength and weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurns your bucket into a grab for logs, stumps, boulders and debris\u003c\/li\u003e\n  \u003cli\u003eWorks with digging buckets, grading buckets and land rakes\u003c\/li\u003e\n  \u003cli\u003eTucks neatly against the dipper arm when not in use\u003c\/li\u003e\n  \u003cli\u003eWeld-on pads let you position it to suit your attachments\u003c\/li\u003e\n  \u003cli\u003eManual version: three locking positions, no hydraulics\u003c\/li\u003e\n  \u003cli\u003eHydraulic version: one double-acting service, line-bored and fully bushed pivot points, hardened pivot pins\u003c\/li\u003e\n  \u003cli\u003eWide tine configuration with a serrated edge for grip (hydraulic version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e18–25 Tonne Excavator Thumb Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eManual thumb\u003c\/th\u003e\n\u003cth\u003eHydraulic thumb\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-TH-M\u003c\/td\u003e\n\u003ctd\u003e200-TH-H\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e18–25 tonnes\u003c\/td\u003e\n\u003ctd\u003e18–25 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e367kg\u003c\/td\u003e\n\u003ctd\u003e377kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulics\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne double-acting service\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWorking positions\u003c\/th\u003e\n\u003ctd\u003eThree locking positions\u003c\/td\u003e\n\u003ctd\u003eHydraulic, 20° closed to 174° open\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003ctd\u003eWeld-on pads on the dipper arm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand clearance with your existing bucket\u003c\/li\u003e\n  \u003cli\u003ePicking up logs, stumps and boulders\u003c\/li\u003e\n  \u003cli\u003eHandling debris and brash\u003c\/li\u003e\n  \u003cli\u003ePlacing rocks and kerbs\u003c\/li\u003e\n  \u003cli\u003eSorting material without changing attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThumb or Grab?\u003c\/h2\u003e\n\n\u003cp\u003eA thumb works with the bucket you already have, so you can dig and grab without changing attachments. If you're handling material all day, a dedicated grab gives a bigger, more secure grip. See our \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003etimber grabs\u003c\/a\u003e and \u003ca href=\"\/collections\/excavator-selector-grabs\"\u003eselector grabs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\n\u003cp\u003eThe weld-on pads need welding to your dipper arm, so plan for a competent welder to fit them. The hydraulic thumb also needs connecting to a double-acting service. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths, quick hitches and auxiliary hydraulics, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eYour bucket type and width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach thumb is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the thumb for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e18–25 Tonne Excavator Thumb FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eManual or hydraulic thumb?\u003c\/h3\u003e\n\u003cp\u003eA manual thumb costs less and needs no hydraulics: you lock it into one of three positions and grip against it with the bucket. A hydraulic thumb opens and closes from the cab on one double-acting service, which makes it quicker when you're grabbing all day.\u003c\/p\u003e\n\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBoth versions mount on weld-on pads on the dipper arm, so the pads need welding on by a competent welder. The pads let you position the thumb to suit a deep digging bucket or a shallow grading bucket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does the hydraulic thumb need?\u003c\/h3\u003e\n\u003cp\u003eOne double-acting hydraulic service. Send us your machine details and we'll confirm your setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it work with my bucket?\u003c\/h3\u003e\n\u003cp\u003eYes. Thumbs work with a wide range of attachments, including digging buckets, grading buckets and land rakes, and the weld-on pads let you set the position to suit them.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 18–25 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eSend us your machine make, model and operating weight, plus your dipper and bucket details, and we'll confirm the right thumb before it's supplied.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/15-18-tonne-excavator-thumb\"\u003e15–18 tonne excavator thumb\u003c\/a\u003e. Compare every size in our \u003ca href=\"\/collections\/excavator-thumbs\"\u003eexcavator thumbs\u003c\/a\u003e range, or browse all our \u003ca href=\"\/collections\/excavator-grabs\"\u003eexcavator grabs and grapples\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which type you need? Our guide to \u003ca href=\"\/blogs\/news\/which-excavator-grab-do-i-need\"\u003echoosing the right excavator grab\u003c\/a\u003e compares selector grabs, timber grabs, folding grabs, manual grapples and thumbs.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Manual","offer_id":66097298506077,"sku":"200-TH-M","price":1908.0,"currency_code":"GBP","in_stock":true},{"title":"Hydraulic","offer_id":66097298538845,"sku":"200-TH-H","price":2988.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/18-25-tonne-excavator-thumb.png?v=1790865929"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/collections\/100-RGR___02_3cb47b81-3c2e-4f48-8a8f-d72b1a030b1b.png?v=1790866113","url":"https:\/\/mammothattachments.com\/collections\/excavator-grabs.oembed?page=2","provider":"Mammoth Attachments","version":"1.0","type":"link"}