{"title":"Excavator Tree Shears","description":"\u003cp\u003e\u003cstrong\u003eExcavator tree shears\u003c\/strong\u003e cut through trunks, saplings and scrub in a single bite, then keep hold of the stem so you can lift it clear and lay it on the pile. Fit one to your excavator and you can clear trees, boundaries and overgrown land from the cab, without anyone working at the base of the tree with a chainsaw.\u003c\/p\u003e\n\n\u003cp\u003eOur hydraulic tree shears come in four sizes for 2 to 30 tonne machines, as a fixed shear or with a 360° rotator. Every shear has a bolt-on Hardox® HB500 blade and a single ram that runs off your excavator's double-acting hammer circuit.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTree shear\u003c\/th\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003cth\u003eMax cut diameter\u003c\/th\u003e\n\u003cth\u003eMax jaw opening\u003c\/th\u003e\n\u003cth\u003eWeight (fixed)\u003c\/th\u003e\n\u003cth\u003eRotating version\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/2-3-5-tonne-excavator-tree-shear\"\u003e2–3.5 tonne tree shear\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003ctd\u003e170mm\u003c\/td\u003e\n\u003ctd\u003e565mm\u003c\/td\u003e\n\u003ctd\u003e193kg\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/2-3-5-tonne-rotating-excavator-tree-shear\"\u003e2–3.5 tonne rotating\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/4-8-tonne-excavator-tree-shear\"\u003e4–8 tonne tree shear\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e4–8 tonnes\u003c\/td\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003ctd\u003e530mm\u003c\/td\u003e\n\u003ctd\u003e340kg\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/4-8-tonne-rotating-excavator-tree-shear\"\u003e4–8 tonne rotating\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/10-22-tonne-excavator-tree-shear\"\u003e10–22 tonne tree shear\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10–22 tonnes\u003c\/td\u003e\n\u003ctd\u003e350mm\u003c\/td\u003e\n\u003ctd\u003e820mm\u003c\/td\u003e\n\u003ctd\u003e850kg\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/10-22-tonne-rotating-excavator-tree-shear\"\u003e10–22 tonne rotating\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/18-30-tonne-excavator-tree-shear\"\u003e18–30 tonne tree shear\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e18–30 tonnes\u003c\/td\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003ctd\u003e1,153mm\u003c\/td\u003e\n\u003ctd\u003e1,520kg\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/18-30-tonne-rotating-excavator-tree-shear\"\u003e18–30 tonne rotating\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eShop by type: \u003ca href=\"\/collections\/fixed-excavator-tree-shears\"\u003efixed excavator tree shears\u003c\/a\u003e and \u003ca href=\"\/collections\/rotating-excavator-tree-shears\"\u003erotating excavator tree shears\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eEach shear is supplied to fit your quick hitch or to pin straight on. \u003ca href=\"\/pages\/request-a-quote\"\u003eSend us your excavator and hitch details\u003c\/a\u003e and we'll confirm the right size. New to tree shears? Read our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eMoving the timber once it's cut? An \u003ca href=\"\/collections\/excavator-timber-grabs\"\u003eexcavator timber grab\u003c\/a\u003e loads and stacks logs and brash. To clear the ground once the trees are down, a \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out roots and scrub, and our \u003ca href=\"\/collections\/excavator-flail-mowers\"\u003eexcavator flail mowers\u003c\/a\u003e cut back grass, brambles and hedges. Or browse all our \u003ca href=\"\/pages\/excavator-attachments\"\u003eexcavator attachments\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"2-3-5-tonne-excavator-tree-shear","title":"2–3.5 Tonne Excavator Tree Shear – 170mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne excavator tree shear\u003c\/strong\u003e lets a mini digger clear saplings, scrub and small trees up to 170mm across, with the operator in the cab instead of on the ground with a chainsaw. The jaw grips the stem, the blade cuts it in one bite and the shear keeps hold, so you can lift the stem clear and lay it on the pile.\u003c\/p\u003e\n\n\u003cp\u003eIt works with a single hydraulic ram and a simple grab-to-cut action, so lining up the blade is quick and forgiving and each cut takes seconds. The bolt-on Hardox® HB500 blade gives a sharp, long-lasting cut and can be removed and replaced when it wears. With few moving parts, there is little to maintain.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. If you're not sure what your machine needs, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 2–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003e170mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with an 18mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eSingle-service attachment that runs off a double-acting hammer circuit\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eOptional side brackets for mounting the blade vertically to de-limb branches\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-TSH (side bracket versions: 020-TSH-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eFixed hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e565mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e640mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e430mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e193kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 18mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eSingle service, runs off a double-acting hammer circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins; optional side brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHeadstock and Side Bracket Options\u003c\/h2\u003e\n\n\u003cp\u003eChoose the mounting option when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock only:\u003c\/strong\u003e the standard setup, with the blade running horizontally for cutting stems at the base.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock + single or double side bracket:\u003c\/strong\u003e adds welded-on side brackets so the shear can also be mounted with the blade running vertically rather than horizontally. Ideal for de-limbing branches. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e which suits your machine and work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eOn a mini digger, this size is ideal where access is tight and the trees are small:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClearing saplings, scrub and overgrown gardens\u003c\/li\u003e\n  \u003cli\u003eCutting back self-seeded trees along fences and boundaries\u003c\/li\u003e\n  \u003cli\u003eClearing small plots, paddocks and building plots before groundworks\u003c\/li\u003e\n  \u003cli\u003eThinning young plantations and shelter belts\u003c\/li\u003e\n  \u003cli\u003eMoving cut stems, poles and fence posts with the jaw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eThis fixed shear cuts with the blade running horizontally, which is all most clearance work needs, and it costs considerably less than the rotating version. With a side bracket fitted, it can also be mounted with the blade vertical for de-limbing. If you'll be cutting leaning stems, working in tight spots or changing the blade angle all day, the \u003ca href=\"\/products\/2-3-5-tonne-rotating-excavator-tree-shear\"\u003e2–3.5 tonne rotating tree shear\u003c\/a\u003e adds a 360° hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear is a single-service attachment: its one ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 170mm. For thicker stems, step up to the \u003ca href=\"\/products\/4-8-tonne-excavator-tree-shear\"\u003e4–8 tonne tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eIs it suitable for a mini digger?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for mini diggers in the 2 to 3.5 tonne class and weighs 193kg. As with any attachment, check your machine's attachment and lifting limits before use.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eIt is a single-service attachment that runs off your machine's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Send us details or photos of your hydraulic connections, and don't assume hoses or couplings are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the side bracket?\u003c\/h3\u003e\n\u003cp\u003eOnly if you want to mount the shear with the blade running vertically, which is ideal for de-limbing branches. For cutting stems at the base, the headstock-only version is all you need.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/4-8-tonne-excavator-tree-shear\"\u003e4–8 tonne tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Headstock only","offer_id":66094723858781,"sku":"020-TSH","price":3108.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + single side bracket","offer_id":66094723891549,"sku":"020-TSH-S1","price":3432.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + double side bracket","offer_id":66094723924317,"sku":"020-TSH-S2","price":3756.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-excavator-tree-shear.webp?v=1790843658"},{"product_id":"4-8-tonne-excavator-tree-shear","title":"4–8 Tonne Excavator Tree Shear – 250mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e4–8 tonne excavator tree shear\u003c\/strong\u003e is sized for midi excavators clearing trees, boundaries and overgrown ground. It cuts hardwood up to 230mm thick in one motion, with a 250mm maximum cut diameter, and holds each stem after the cut so you can place it exactly where you want it.\u003c\/p\u003e\n\n\u003cp\u003eIt works with a single hydraulic ram and a simple grab-to-cut action, so lining up the blade is quick and forgiving and each cut takes seconds. The bolt-on Hardox® HB500 blade gives a sharp, long-lasting cut and can be removed and replaced when it wears. With few moving parts, there is little to maintain.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. If you're not sure what your machine needs, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 4–8 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eCuts hardwood up to 230mm in one motion, 250mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with a 20mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eSingle-service attachment that runs off a double-acting hammer circuit\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eOptional side brackets for mounting the blade vertically to de-limb branches\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–8 Tonne Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-TSH (side bracket versions: 060-TSH-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eFixed hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–8 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardwood cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 230mm in one motion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e530mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e525mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e340kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 20mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eSingle service, runs off a double-acting hammer circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins; optional side brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHeadstock and Side Bracket Options\u003c\/h2\u003e\n\n\u003cp\u003eChoose the mounting option when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock only:\u003c\/strong\u003e the standard setup, with the blade running horizontally for cutting stems at the base.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock + single or double side bracket:\u003c\/strong\u003e adds welded-on side brackets so the shear can also be mounted with the blade running vertically rather than horizontally. Ideal for de-limbing branches. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e which suits your machine and work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eThis size suits midi excavators doing regular clearance work:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand and site clearance before groundworks\u003c\/li\u003e\n  \u003cli\u003eClearing boundaries, hedge lines and tracks\u003c\/li\u003e\n  \u003cli\u003eThinning plantations and woodland edges\u003c\/li\u003e\n  \u003cli\u003eClearing scrub and trees along ditches and drains\u003c\/li\u003e\n  \u003cli\u003eHandling cut timber, poles and fence posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eThis fixed shear cuts with the blade running horizontally, which is all most clearance work needs, and it costs considerably less than the rotating version. With a side bracket fitted, it can also be mounted with the blade vertical for de-limbing. If you'll be cutting leaning stems, working in tight spots or changing the blade angle all day, the \u003ca href=\"\/products\/4-8-tonne-rotating-excavator-tree-shear\"\u003e4–8 tonne rotating tree shear\u003c\/a\u003e adds a 360° hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear is a single-service attachment: its one ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–8 Tonne Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 250mm, and it cuts hardwood up to 230mm thick in one motion. For thicker stems, step up to the \u003ca href=\"\/products\/10-22-tonne-excavator-tree-shear\"\u003e10–22 tonne tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–8 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eIt is a single-service attachment that runs off your machine's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Send us details or photos of your hydraulic connections, and don't assume hoses or couplings are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the side bracket?\u003c\/h3\u003e\n\u003cp\u003eOnly if you want to mount the shear with the blade running vertically, which is ideal for de-limbing branches. For cutting stems at the base, the headstock-only version is all you need.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-excavator-tree-shear\"\u003e2–3.5 tonne tree shear\u003c\/a\u003e or the \u003ca href=\"\/products\/10-22-tonne-excavator-tree-shear\"\u003e10–22 tonne tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Headstock only","offer_id":66094724055389,"sku":"060-TSH","price":3588.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + single side bracket","offer_id":66094724088157,"sku":"060-TSH-S1","price":3996.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + double side bracket","offer_id":66094724120925,"sku":"060-TSH-S2","price":4404.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-8-tonne-excavator-tree-shear.webp?v=1790843658"},{"product_id":"10-22-tonne-excavator-tree-shear","title":"10–22 Tonne Excavator Tree Shear – 350mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e10–22 tonne excavator tree shear\u003c\/strong\u003e suits 13 to 14 tonne and 20 tonne class excavators on site clearance and forestry work. It cuts hardwood up to 330mm thick in one motion, with a 350mm maximum cut diameter and an 820mm jaw opening for larger trunks.\u003c\/p\u003e\n\n\u003cp\u003eIt works with a single hydraulic ram and a simple grab-to-cut action, so lining up the blade is quick and forgiving and each cut takes seconds. The bolt-on Hardox® HB500 blade gives a sharp, long-lasting cut and can be removed and replaced when it wears. With few moving parts, there is little to maintain.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. If you're not sure what your machine needs, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 10–22 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eCuts hardwood up to 330mm in one motion, 350mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with a 20mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eSingle-service attachment that runs off a double-acting hammer circuit\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eOptional side brackets for mounting the blade vertically to de-limb branches\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–22 Tonne Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-TSH (side bracket versions: 100-TSH-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eFixed hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e350mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardwood cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 330mm in one motion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e820mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e1100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e785mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e850kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 20mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eSingle service, runs off a double-acting hammer circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins; optional side brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHeadstock and Side Bracket Options\u003c\/h2\u003e\n\n\u003cp\u003eChoose the mounting option when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock only:\u003c\/strong\u003e the standard setup, with the blade running horizontally for cutting stems at the base.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock + single or double side bracket:\u003c\/strong\u003e adds welded-on side brackets so the shear can also be mounted with the blade running vertically rather than horizontally. Ideal for de-limbing branches. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e which suits your machine and work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eThis size covers the machines that take on bigger clearance and forestry jobs:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSite clearance on development and infrastructure projects\u003c\/li\u003e\n  \u003cli\u003eForestry thinning and woodland management\u003c\/li\u003e\n  \u003cli\u003eClearing trees along tracks, verges and drainage routes\u003c\/li\u003e\n  \u003cli\u003eRemoving trees and scrub ahead of earthworks\u003c\/li\u003e\n  \u003cli\u003eSorting and stacking cut timber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eThis fixed shear cuts with the blade running horizontally, which is all most clearance work needs, and it costs considerably less than the rotating version. With a side bracket fitted, it can also be mounted with the blade vertical for de-limbing. If you'll be cutting leaning stems, working in tight spots or changing the blade angle all day, the \u003ca href=\"\/products\/10-22-tonne-rotating-excavator-tree-shear\"\u003e10–22 tonne rotating tree shear\u003c\/a\u003e adds a 360° hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear is a single-service attachment: its one ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–22 Tonne Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 350mm, and it cuts hardwood up to 330mm thick in one motion. For thicker stems, step up to the \u003ca href=\"\/products\/18-30-tonne-excavator-tree-shear\"\u003e18–30 tonne tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–22 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eIt is a single-service attachment that runs off your machine's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Send us details or photos of your hydraulic connections, and don't assume hoses or couplings are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the side bracket?\u003c\/h3\u003e\n\u003cp\u003eOnly if you want to mount the shear with the blade running vertically, which is ideal for de-limbing branches. For cutting stems at the base, the headstock-only version is all you need.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-8-tonne-excavator-tree-shear\"\u003e4–8 tonne tree shear\u003c\/a\u003e or the \u003ca href=\"\/products\/18-30-tonne-excavator-tree-shear\"\u003e18–30 tonne tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Headstock only","offer_id":66094724153693,"sku":"100-TSH","price":5988.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + single side bracket","offer_id":66094724186461,"sku":"100-TSH-S1","price":6492.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + double side bracket","offer_id":66094724219229,"sku":"100-TSH-S2","price":6996.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-22-tonne-excavator-tree-shear.webp?v=1790843655"},{"product_id":"18-30-tonne-excavator-tree-shear","title":"18–30 Tonne Excavator Tree Shear – 450mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e18–30 tonne excavator tree shear\u003c\/strong\u003e is the largest in the range, built for heavy clearance with big crawler excavators. It cuts hardwood up to 440mm thick in one motion, with a 450mm maximum cut diameter and a jaw that opens to 1153mm.\u003c\/p\u003e\n\n\u003cp\u003eIt works with a single hydraulic ram and a simple grab-to-cut action, so lining up the blade is quick and forgiving and each cut takes seconds. The bolt-on Hardox® HB500 blade gives a sharp, long-lasting cut and can be removed and replaced when it wears. With few moving parts, there is little to maintain.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. If you're not sure what your machine needs, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 18–30 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eCuts hardwood up to 440mm in one motion, 450mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with a 25mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eSingle-service attachment that runs off a double-acting hammer circuit\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eOptional side brackets for mounting the blade vertically to de-limb branches\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e18–30 Tonne Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-TSH (side bracket versions: 200-TSH-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eFixed hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e18–30 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardwood cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 440mm in one motion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e1153mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e1563mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e920mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1,520kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 25mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eSingle service, runs off a double-acting hammer circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins; optional side brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHeadstock and Side Bracket Options\u003c\/h2\u003e\n\n\u003cp\u003eChoose the mounting option when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock only:\u003c\/strong\u003e the standard setup, with the blade running horizontally for cutting stems at the base.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadstock + single or double side bracket:\u003c\/strong\u003e adds welded-on side brackets so the shear can also be mounted with the blade running vertically rather than horizontally. Ideal for de-limbing branches. \u003ca href=\"\/pages\/request-a-quote\"\u003eAsk us\u003c\/a\u003e which suits your machine and work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eThis size is built for large machines and heavy timber:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLarge-scale land and site clearance\u003c\/li\u003e\n  \u003cli\u003eFelling larger trees within the shear's rated capacity\u003c\/li\u003e\n  \u003cli\u003eClearing heavy timber ahead of major earthworks\u003c\/li\u003e\n  \u003cli\u003eWoodland and forestry clearance\u003c\/li\u003e\n  \u003cli\u003eMoving and stacking heavy timber and poles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFixed or Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eThis fixed shear cuts with the blade running horizontally, which is all most clearance work needs, and it costs considerably less than the rotating version. With a side bracket fitted, it can also be mounted with the blade vertical for de-limbing. If you'll be cutting leaning stems, working in tight spots or changing the blade angle all day, the \u003ca href=\"\/products\/18-30-tonne-rotating-excavator-tree-shear\"\u003e18–30 tonne rotating tree shear\u003c\/a\u003e adds a 360° hydraulic rotator.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear is a single-service attachment: its one ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Connections vary between machines and quick hitches, so send us details or photos of yours before ordering. Don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e18–30 Tonne Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 450mm, and it cuts hardwood up to 440mm thick in one motion. For anything bigger, use a qualified tree surgeon.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 18–30 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eIt is a single-service attachment that runs off your machine's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. Send us details or photos of your hydraulic connections, and don't assume hoses or couplings are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need the side bracket?\u003c\/h3\u003e\n\u003cp\u003eOnly if you want to mount the shear with the blade running vertically, which is ideal for de-limbing branches. For cutting stems at the base, the headstock-only version is all you need.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/10-22-tonne-excavator-tree-shear\"\u003e10–22 tonne tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Headstock only","offer_id":66094724251997,"sku":"200-TSH","price":11388.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + single side bracket","offer_id":66094724284765,"sku":"200-TSH-S1","price":12180.0,"currency_code":"GBP","in_stock":true},{"title":"Headstock + double side bracket","offer_id":66094724317533,"sku":"200-TSH-S2","price":12972.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/18-30-tonne-excavator-tree-shear.webp?v=1790843655"},{"product_id":"2-3-5-tonne-rotating-excavator-tree-shear","title":"2–3.5 Tonne Rotating Excavator Tree Shear – 170mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e2–3.5 tonne rotating excavator tree shear\u003c\/strong\u003e gives a mini digger a shear that turns through a full 360°. A bolt-on, radial, piston-driven hydraulic rotator lets you set the blade to any angle, so you can cut leaning stems, work in tight spots and de-limb without moving the machine. It has a 170mm maximum cut diameter.\u003c\/p\u003e\n\n\u003cp\u003eLike the fixed version, it uses a single hydraulic ram with a grab-to-cut action and a bolt-on, replaceable Hardox® HB500 blade. The jaw keeps hold of each stem after the cut, and the rotator lets you lay it down exactly where you want it.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. Because the rotator needs its own hydraulic supply, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering and we'll confirm the setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 2–3.5 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eBolt-on, radial, piston-driven 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003e170mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with an 18mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eTurn the blade vertical to de-limb without remounting the shear\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e2–3.5 Tonne Rotating Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e020-TSH-R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eRotating hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eBolt-on, radial, piston-driven, 360° hydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e2–3.5 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e565mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e640mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e430mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e193kg for the fixed shear; the rotator adds to this, so ask us for the exact figure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 18mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eShear runs off a double-acting hammer circuit; the rotator also needs a hydraulic supply\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed shear can only cut at the angle the dipper presents it. The rotator turns the whole shear through 360°, which pays off when you are:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCutting leaning or angled stems\u003c\/li\u003e\n  \u003cli\u003eWorking in tight spots between trees, fences or buildings\u003c\/li\u003e\n  \u003cli\u003eDe-limbing branches with the blade turned vertical\u003c\/li\u003e\n  \u003cli\u003eLaying cut stems in line for stacking or collection\u003c\/li\u003e\n  \u003cli\u003eCutting along boundaries without constantly repositioning the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf most of your work is cutting at the base and you want to keep the cost down, the \u003ca href=\"\/products\/2-3-5-tonne-excavator-tree-shear\"\u003e2–3.5 tonne fixed tree shear\u003c\/a\u003e uses the same shear without the rotator.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eOn a mini digger, this size is ideal where access is tight and the trees are small:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClearing saplings, scrub and overgrown gardens\u003c\/li\u003e\n  \u003cli\u003eCutting back self-seeded trees along fences and boundaries\u003c\/li\u003e\n  \u003cli\u003eClearing small plots, paddocks and building plots before groundworks\u003c\/li\u003e\n  \u003cli\u003eThinning young plantations and shelter belts\u003c\/li\u003e\n  \u003cli\u003eMoving cut stems, poles and fence posts with the jaw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear's single ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and the way that is arranged depends on your machine and hitch. Send us details or photos of your hydraulic connections before ordering, and don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e2–3.5 Tonne Rotating Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating tree shear?\u003c\/h3\u003e\n\u003cp\u003eThe rotator turns the shear through 360°, so you can match the blade to leaning or angled stems, cut in tight spots and de-limb without repositioning the machine or remounting the shear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 170mm. For thicker stems, step up to the \u003ca href=\"\/products\/4-8-tonne-rotating-excavator-tree-shear\"\u003e4–8 tonne rotating tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eThe shear runs off a double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and how that is arranged depends on your machine, so send us your hydraulic details and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 2–3.5 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts, and the rotator makes it easy to lay timber in line for stacking.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a bigger machine, see the \u003ca href=\"\/products\/4-8-tonne-rotating-excavator-tree-shear\"\u003e4–8 tonne rotating tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66094731624797,"sku":"020-TSH-R","price":6228.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/2-3-5-tonne-rotating-excavator-tree-shear.webp?v=1790843778"},{"product_id":"4-8-tonne-rotating-excavator-tree-shear","title":"4–8 Tonne Rotating Excavator Tree Shear – 250mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e4–8 tonne rotating excavator tree shear\u003c\/strong\u003e puts a 360° hydraulic rotator on a shear that cuts hardwood up to 230mm thick in one motion. Turn the blade to match each stem, cut in tight spots and de-limb without repositioning your midi excavator.\u003c\/p\u003e\n\n\u003cp\u003eLike the fixed version, it uses a single hydraulic ram with a grab-to-cut action and a bolt-on, replaceable Hardox® HB500 blade. The jaw keeps hold of each stem after the cut, and the rotator lets you lay it down exactly where you want it.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. Because the rotator needs its own hydraulic supply, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering and we'll confirm the setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 4–8 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eBolt-on, radial, piston-driven 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eCuts hardwood up to 230mm in one motion, 250mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with a 20mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eTurn the blade vertical to de-limb without remounting the shear\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e4–8 Tonne Rotating Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e060-TSH-R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eRotating hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eBolt-on, radial, piston-driven, 360° hydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e4–8 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardwood cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 230mm in one motion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e530mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e525mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e340kg for the fixed shear; the rotator adds to this, so ask us for the exact figure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 20mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eShear runs off a double-acting hammer circuit; the rotator also needs a hydraulic supply\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed shear can only cut at the angle the dipper presents it. The rotator turns the whole shear through 360°, which pays off when you are:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCutting leaning or angled stems\u003c\/li\u003e\n  \u003cli\u003eWorking in tight spots between trees, fences or buildings\u003c\/li\u003e\n  \u003cli\u003eDe-limbing branches with the blade turned vertical\u003c\/li\u003e\n  \u003cli\u003eLaying cut stems in line for stacking or collection\u003c\/li\u003e\n  \u003cli\u003eCutting along boundaries without constantly repositioning the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf most of your work is cutting at the base and you want to keep the cost down, the \u003ca href=\"\/products\/4-8-tonne-excavator-tree-shear\"\u003e4–8 tonne fixed tree shear\u003c\/a\u003e uses the same shear without the rotator.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eThis size suits midi excavators doing regular clearance work:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLand and site clearance before groundworks\u003c\/li\u003e\n  \u003cli\u003eClearing boundaries, hedge lines and tracks\u003c\/li\u003e\n  \u003cli\u003eThinning plantations and woodland edges\u003c\/li\u003e\n  \u003cli\u003eClearing scrub and trees along ditches and drains\u003c\/li\u003e\n  \u003cli\u003eHandling cut timber, poles and fence posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear's single ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and the way that is arranged depends on your machine and hitch. Send us details or photos of your hydraulic connections before ordering, and don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e4–8 Tonne Rotating Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating tree shear?\u003c\/h3\u003e\n\u003cp\u003eThe rotator turns the shear through 360°, so you can match the blade to leaning or angled stems, cut in tight spots and de-limb without repositioning the machine or remounting the shear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 250mm, and it cuts hardwood up to 230mm thick in one motion. For thicker stems, step up to the \u003ca href=\"\/products\/10-22-tonne-rotating-excavator-tree-shear\"\u003e10–22 tonne rotating tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eThe shear runs off a double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and how that is arranged depends on your machine, so send us your hydraulic details and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 4–8 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts, and the rotator makes it easy to lay timber in line for stacking.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/2-3-5-tonne-rotating-excavator-tree-shear\"\u003e2–3.5 tonne rotating tree shear\u003c\/a\u003e or the \u003ca href=\"\/products\/10-22-tonne-rotating-excavator-tree-shear\"\u003e10–22 tonne rotating tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66094731657565,"sku":"060-TSH-R","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/4-8-tonne-rotating-excavator-tree-shear.webp?v=1790843778"},{"product_id":"10-22-tonne-rotating-excavator-tree-shear","title":"10–22 Tonne Rotating Excavator Tree Shear – 350mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e10–22 tonne rotating excavator tree shear\u003c\/strong\u003e combines a 350mm maximum cut diameter with a 360° hydraulic rotator, for 13 to 14 tonne and 20 tonne class excavators clearing sites and woodland. It cuts hardwood up to 330mm thick in one motion and lets you set the blade to any angle.\u003c\/p\u003e\n\n\u003cp\u003eLike the fixed version, it uses a single hydraulic ram with a grab-to-cut action and a bolt-on, replaceable Hardox® HB500 blade. The jaw keeps hold of each stem after the cut, and the rotator lets you lay it down exactly where you want it.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. Because the rotator needs its own hydraulic supply, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering and we'll confirm the setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 10–22 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eBolt-on, radial, piston-driven 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eCuts hardwood up to 330mm in one motion, 350mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with a 20mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eTurn the blade vertical to de-limb without remounting the shear\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10–22 Tonne Rotating Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e100-TSH-R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eRotating hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eBolt-on, radial, piston-driven, 360° hydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e10–22 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e350mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardwood cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 330mm in one motion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e820mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e1100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e785mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e850kg for the fixed shear; the rotator adds to this, so ask us for the exact figure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 20mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eShear runs off a double-acting hammer circuit; the rotator also needs a hydraulic supply\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed shear can only cut at the angle the dipper presents it. The rotator turns the whole shear through 360°, which pays off when you are:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCutting leaning or angled stems\u003c\/li\u003e\n  \u003cli\u003eWorking in tight spots between trees, fences or buildings\u003c\/li\u003e\n  \u003cli\u003eDe-limbing branches with the blade turned vertical\u003c\/li\u003e\n  \u003cli\u003eLaying cut stems in line for stacking or collection\u003c\/li\u003e\n  \u003cli\u003eCutting along boundaries without constantly repositioning the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf most of your work is cutting at the base and you want to keep the cost down, the \u003ca href=\"\/products\/10-22-tonne-excavator-tree-shear\"\u003e10–22 tonne fixed tree shear\u003c\/a\u003e uses the same shear without the rotator.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eThis size covers the machines that take on bigger clearance and forestry jobs:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSite clearance on development and infrastructure projects\u003c\/li\u003e\n  \u003cli\u003eForestry thinning and woodland management\u003c\/li\u003e\n  \u003cli\u003eClearing trees along tracks, verges and drainage routes\u003c\/li\u003e\n  \u003cli\u003eRemoving trees and scrub ahead of earthworks\u003c\/li\u003e\n  \u003cli\u003eSorting and stacking cut timber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear's single ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and the way that is arranged depends on your machine and hitch. Send us details or photos of your hydraulic connections before ordering, and don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e10–22 Tonne Rotating Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating tree shear?\u003c\/h3\u003e\n\u003cp\u003eThe rotator turns the shear through 360°, so you can match the blade to leaning or angled stems, cut in tight spots and de-limb without repositioning the machine or remounting the shear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 350mm, and it cuts hardwood up to 330mm thick in one motion. For thicker stems, step up to the \u003ca href=\"\/products\/18-30-tonne-rotating-excavator-tree-shear\"\u003e18–30 tonne rotating tree shear\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eThe shear runs off a double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and how that is arranged depends on your machine, so send us your hydraulic details and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 10–22 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts, and the rotator makes it easy to lay timber in line for stacking.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller or larger machine, see the \u003ca href=\"\/products\/4-8-tonne-rotating-excavator-tree-shear\"\u003e4–8 tonne rotating tree shear\u003c\/a\u003e or the \u003ca href=\"\/products\/18-30-tonne-rotating-excavator-tree-shear\"\u003e18–30 tonne rotating tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66094732509533,"sku":"100-TSH-R","price":11748.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/10-22-tonne-rotating-excavator-tree-shear.webp?v=1790843782"},{"product_id":"18-30-tonne-rotating-excavator-tree-shear","title":"18–30 Tonne Rotating Excavator Tree Shear – 450mm Cut","description":"\u003cp\u003eThe \u003cstrong\u003e18–30 tonne rotating excavator tree shear\u003c\/strong\u003e is the largest rotating shear in the range. It cuts hardwood up to 440mm thick in one motion, opens to 1153mm and turns through 360°, so you can handle big timber at any angle from the cab.\u003c\/p\u003e\n\n\u003cp\u003eLike the fixed version, it uses a single hydraulic ram with a grab-to-cut action and a bolt-on, replaceable Hardox® HB500 blade. The jaw keeps hold of each stem after the cut, and the rotator lets you lay it down exactly where you want it.\u003c\/p\u003e\n\n\u003cp\u003eThe shear is supplied to fit your quick hitch or to pin straight onto the dipper with removable pins. Because the rotator needs its own hydraulic supply, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us your machine, hitch and hydraulic details\u003c\/a\u003e before ordering and we'll confirm the setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt for 18–30 tonne excavators\u003c\/li\u003e\n  \u003cli\u003eBolt-on, radial, piston-driven 360° hydraulic rotator\u003c\/li\u003e\n  \u003cli\u003eCuts hardwood up to 440mm in one motion, 450mm maximum cut diameter\u003c\/li\u003e\n  \u003cli\u003eBolt-on, replaceable Hardox® HB500 blade with a 25mm cutting edge\u003c\/li\u003e\n  \u003cli\u003eSingle hydraulic ram with a quick, forgiving grab-to-cut action\u003c\/li\u003e\n  \u003cli\u003eTurn the blade vertical to de-limb without remounting the shear\u003c\/li\u003e\n  \u003cli\u003eDoubles as a hydraulic grab for timber, poles and fence posts\u003c\/li\u003e\n  \u003cli\u003eSupplied to fit your quick hitch or pin-on with removable pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e18–30 Tonne Rotating Tree Shear Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel \/ SKU\u003c\/th\u003e\n\u003ctd\u003e200-TSH-R\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShear type\u003c\/th\u003e\n\u003ctd\u003eRotating hydraulic tree shear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRotator\u003c\/th\u003e\n\u003ctd\u003eBolt-on, radial, piston-driven, 360° hydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExcavator size\u003c\/th\u003e\n\u003ctd\u003e18–30 tonnes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum cut diameter\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHardwood cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 440mm in one motion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum jaw opening\u003c\/th\u003e\n\u003ctd\u003e1153mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eClosed width\u003c\/th\u003e\n\u003ctd\u003e1563mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMast height\u003c\/th\u003e\n\u003ctd\u003e920mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1,520kg for the fixed shear; the rotator adds to this, so ask us for the exact figure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003eBolt-on, replaceable Hardox® HB500, 25mm cutting edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003ctd\u003e320 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHydraulic service\u003c\/th\u003e\n\u003ctd\u003eShear runs off a double-acting hammer circuit; the rotator also needs a hydraulic supply\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eQuick hitch or pin-on with removable pins\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Choose a Rotating Tree Shear?\u003c\/h2\u003e\n\n\u003cp\u003eA fixed shear can only cut at the angle the dipper presents it. The rotator turns the whole shear through 360°, which pays off when you are:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCutting leaning or angled stems\u003c\/li\u003e\n  \u003cli\u003eWorking in tight spots between trees, fences or buildings\u003c\/li\u003e\n  \u003cli\u003eDe-limbing branches with the blade turned vertical\u003c\/li\u003e\n  \u003cli\u003eLaying cut stems in line for stacking or collection\u003c\/li\u003e\n  \u003cli\u003eCutting along boundaries without constantly repositioning the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf most of your work is cutting at the base and you want to keep the cost down, the \u003ca href=\"\/products\/18-30-tonne-excavator-tree-shear\"\u003e18–30 tonne fixed tree shear\u003c\/a\u003e uses the same shear without the rotator.\u003c\/p\u003e\n\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\n\u003cp\u003eThis size is built for large machines and heavy timber:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLarge-scale land and site clearance\u003c\/li\u003e\n  \u003cli\u003eFelling larger trees within the shear's rated capacity\u003c\/li\u003e\n  \u003cli\u003eClearing heavy timber ahead of major earthworks\u003c\/li\u003e\n  \u003cli\u003eWoodland and forestry clearance\u003c\/li\u003e\n  \u003cli\u003eMoving and stacking heavy timber and poles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore You Cut\u003c\/h2\u003e\n\n\u003cp\u003eCheck whether the trees are covered by a Tree Preservation Order or sit in a conservation area, whether you need a felling licence, and that there are no active birds' nests before you start. Keep everyone well clear of the working area and watch for overhead lines. Our guide on \u003ca href=\"\/blogs\/news\/how-to-use-an-excavator-tree-shear\"\u003ehow to use an excavator tree shear\u003c\/a\u003e covers the checks and the cutting technique.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator and Quick-Hitch Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eMachine weight is only a starting point. Excavators in the same weight class can use different pin sizes, linkage widths and quick hitches, so please send us the following when you order:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcavator make and model\u003c\/li\u003e\n  \u003cli\u003eMachine operating weight\u003c\/li\u003e\n  \u003cli\u003eQuick hitch make and model, if you run one\u003c\/li\u003e\n  \u003cli\u003ePin diameter and pin centres\u003c\/li\u003e\n  \u003cli\u003eDipper width\u003c\/li\u003e\n  \u003cli\u003eDetails or photos of your hammer circuit connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur guide on \u003ca href=\"\/blogs\/news\/how-to-measure-an-excavator-for-a-new-bucket\"\u003ehow to measure an excavator for a new bucket\u003c\/a\u003e shows how to take the pin measurements, which are the same for a shear. If you can't measure, \u003ca href=\"\/pages\/request-a-quote\"\u003esend us photos of your hitch\u003c\/a\u003e and we'll help.\u003c\/p\u003e\n\n\u003ch2\u003eHydraulic Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe shear's single ram runs off your excavator's existing double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and the way that is arranged depends on your machine and hitch. Send us details or photos of your hydraulic connections before ordering, and don't assume hoses, couplings or installation parts are included unless they are listed on your quote.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery and Ordering\u003c\/h2\u003e\n\n\u003cp\u003eEach shear is supplied to suit your confirmed quick hitch or pins. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need the shear for a fixed date, \u003ca href=\"\/pages\/request-a-quote\"\u003econtact us before ordering\u003c\/a\u003e so we can confirm the current lead time.\u003c\/p\u003e\n\n\u003ch2\u003e18–30 Tonne Rotating Tree Shear FAQs\u003c\/h2\u003e\n\n\u003ch3\u003eWhy choose a rotating tree shear?\u003c\/h3\u003e\n\u003cp\u003eThe rotator turns the shear through 360°, so you can match the blade to leaning or angled stems, cut in tight spots and de-limb without repositioning the machine or remounting the shear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the maximum cut diameter?\u003c\/h3\u003e\n\u003cp\u003eThe maximum cut diameter is 450mm, and it cuts hardwood up to 440mm thick in one motion. For anything bigger, use a qualified tree surgeon.\u003c\/p\u003e\n\n\u003ch3\u003eWhat hydraulics does it need?\u003c\/h3\u003e\n\u003cp\u003eThe shear runs off a double-acting hammer circuit, with a maximum working pressure of 320 bar. The rotator also needs a hydraulic supply, and how that is arranged depends on your machine, so send us your hydraulic details and we'll confirm the setup before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my 18–30 tonne excavator?\u003c\/h3\u003e\n\u003cp\u003eMachine weight is the starting point, but excavators in the same class can use different pins, linkage widths and quick hitches. Send us your machine model, hitch details and pin measurements and we'll confirm fitment before the shear is supplied.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use it as a grab?\u003c\/h3\u003e\n\u003cp\u003eYes. It doubles as a hydraulic grab for moving cut timber, positioning poles and placing fence posts, and the rotator makes it easy to lay timber in line for stacking.\u003c\/p\u003e\n\n\u003ch2\u003eOther Sizes\u003c\/h2\u003e\n\n\u003cp\u003eFor a smaller machine, see the \u003ca href=\"\/products\/10-22-tonne-rotating-excavator-tree-shear\"\u003e10–22 tonne rotating tree shear\u003c\/a\u003e. Compare every size, fixed and rotating, in our \u003ca href=\"\/collections\/excavator-tree-shears\"\u003eexcavator tree shears\u003c\/a\u003e range. Clearing the ground afterwards? A \u003ca href=\"\/collections\/excavator-root-rakes\"\u003eroot rake\u003c\/a\u003e pulls out the roots and scrub once the stems are cut.\u003c\/p\u003e","brand":"Hardlife","offers":[{"title":"Default Title","offer_id":66094732542301,"sku":"200-TSH-R","price":19908.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/files\/18-30-tonne-rotating-excavator-tree-shear.webp?v=1790843778"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/9049\/8653\/collections\/100-TSH_mid___08.webp?v=1790844220","url":"https:\/\/mammothattachments.com\/collections\/excavator-tree-shears.oembed","provider":"Mammoth Attachments","version":"1.0","type":"link"}