Sliding Excavator Pallet Forks – 2 to 22 Tonne
2–3.5 tonne
£845.00 Ex. VAT
£1,014.00 Inc. VAT
Skip to product information
Sliding Excavator Pallet Forks – 2 to 22 Tonne
Delivery within 7–10 Working Days*
£845.00 Ex. VAT
£1,014.00 Inc. VAT
Sliding excavator pallet forks turn your excavator into a material handler for pallets, blocks, kerbs and pipes, without bringing a telehandler onto site. The Class 2A fork tines run on rails, so you can slide them left and right to suit the pallet and lock them in position.
Because the tines are held on the rails rather than hanging free, they stay vertical as you lift and place, which gives you precise control and a better feel for the load. They're made for 2 to 22 tonne excavators, and each set is finished with the linkage to suit your machine.
Key Features
- Class 2A fork tines on rails
- Tines slide left and right and lock in position
- Tines stay vertical for precise placing
- Adjust the width to suit different pallets
- Sizes for 2 to 22 tonne excavators, including a combi link for 65mm and 80mm pins
- Finished with the linkage to fit your excavator
Sliding Excavator Pallet Forks Sizes
| Excavator size | Model |
|---|---|
| 2–3.5 tonne | 020-PFS |
| 4–6 tonne | 040-PFS |
| 6–9 tonne | 060-PFS |
| 10–14 tonne | 100-PFS |
| 15–18 tonne | 150-PFS |
| 20 tonne | 200-PFS |
| 14–22 tonne combi link (65mm and 80mm pins) | 100-PFSC6580 |
| Tines | Class 2A |
|---|---|
| Tine mounting | Rails, with locking points |
| Excavator sizes | 2–22 tonnes |
| Linkage | Made to fit your excavator |
Where They Work Best
- Unloading and placing pallets of blocks and bricks
- Moving kerbs, slabs and pipes
- Sites without a telehandler
- Placing materials over trenches and walls
Sliding or Floating Forks?
Sliding forks hold the tines rigid on rails and lock them at the width you set, for precise placing. Floating forks hang on a round bar and settle level on uneven ground, which is more forgiving on rough sites. See our floating pallet forks.
Lifting Safely
In the UK, lifting a load with an excavator is a lifting operation under LOLER, so plan the lift, work within your excavator's rated lifting capacity, and keep people clear of the load. If you're not sure your machine is set up for lifting, check with your machine supplier before you use the forks. Our guide on how to use excavator pallet forks safely takes you through planning the lift step by step.
Fitting Them to Your Excavator
Choose your excavator size above. Each set is finished with the linkage to suit your machine, so when you order, send us your excavator make and model, operating weight, quick hitch make and model if you run one, pin diameter, pin centres and dipper width. Our guide on how to measure an excavator for a new bucket shows how to take the measurements.
Delivery and Ordering
Each set of forks is confirmed to suit your machine before it's supplied. Delivery is usually within 7 to 10 working days, although factory lead times can change this. If you need it for a fixed date, contact us before ordering so we can confirm the current lead time.
Sliding Excavator Pallet Forks FAQs
What can I lift with them?
Pallets, blocks, bricks, kerbs, pipes and other materials, within the rated capacity of the forks and your excavator. Ask us for the fork rating for your size.
Which size do I need?
Choose the option that matches your excavator's operating weight. The 14–22 tonne combi link version is made for 65mm and 80mm pins.
Do they need hydraulics?
No. They mount on your excavator's linkage and need no hydraulics.
Will they fit my excavator?
They're finished with the linkage to suit your machine. Send us your make, model, pin diameter, pin centres, dipper width and quick hitch details and we'll confirm them before they're supplied.
Compare both types in our excavator pallet forks, or browse all our excavator tools.