Skid Steer Attachments

Skid steer attachments let one compact loader drill post holes, move pallets, dig trenches, trim hedges and crush rubble, so you get more work out of the machine you already have. Mammoth Attachments supplies Auger Torque and Kovaco attachments for skid steer loaders and mini loaders, with frames to suit your machine.

Every skid steer attachment is quoted to suit your loader and its hydraulics. Use the quote form on any product page, or request a quote here, and we'll come back with a price, lead time and delivery cost.

Our Skid Steer Attachments Range

Skid Steer Augers

Drill post holes, tree pits and foundation holes from 100mm to 1.2m across. The 3000 MAX, 3500 MAX and 4500 MAX suit standard flow skid steers up to 80hp, and the 5500 MAX, 7000 MAX and 8000 MAX suit high flow machines up to 150 l/min, on a fixed centre or side shift cradle. Add auger extensions for deeper holes, and keep spare auger teeth on site.

Mini Loader Augers

The ML1500, ML2000 and ML2500 run on 20 to 65 l/min and drill holes from 100mm to 500mm across from a 2 way or 4 way swing frame, for gardens and tight sites.

Skid Steer Pallet Forks

Move pallets on sites that are too rough for a forklift. The PF1500 and PF1800 carry 1500kg or 1800kg, with adjustable tines, a high visibility brick guard and a side step.

4 in 1 Buckets

Kovaco's 4 in 1 bucket opens and closes like a jaw, so one attachment levels, loads, digs and grips loose or awkward loads. Six widths run from 1440mm to 2200mm, with Hardox® edges and the option of teeth. Read what a 4 in 1 bucket does and how to choose one.

Skid Steer Sweepers and Angle Brushes

The Kovaco sweeper collector sweeps, collects and dumps debris in one operation, in widths from 1400mm to 2400mm. The sweeper with hydraulic waste collector cleans roads, car parks and sports courts, and the Kovaco angle brush pushes dirt, dried mud, sand and snow aside, in widths from 1500mm to 2600mm. Our guide to which skid steer sweeper you need compares all three.

Skid Steer Trenchers

Auger Torque's MT and XHD trenchers fit skid steers on a side shift frame and dig trenches up to 1.5m deep for cables, pipes, drainage and ground source heat pumps.

Skid Steer Hedge Trimmer

The T150 hedge trimmer fits skid steers as well as 1.5 to 8 tonne excavators, with a 1.5m blade, or 2.5m with the optional extension.

Cone Crusher Bucket

Crush concrete, brick and rubble on site so you can reuse it. Auger Torque's cone crusher bucket suits skid steers, mini loaders, backhoes, telehandlers and 3 to 10 tonne excavators.

Earth Drill Attachments

Swap the auger for a stump planer, log splitter, cement mixer bowl or clean out disc, and the same earth drill planes out stumps, splits logs, mixes concrete or clears the bottom of a hole.

How to Choose the Right Skid Steer Attachment

Check Your Hydraulic Flow

Hydraulic attachments run off your loader's auxiliary circuit, so the oil flow it delivers decides what you can run. Standard flow skid steers suit the 3000 to 4500 MAX augers, high flow machines suit the 5500 to 8000 MAX, and mini loaders from 20 l/min suit the ML augers. Each product page lists the flow it needs. Your loader's manual or spec sheet gives its auxiliary flow, or tell us the make and model and we'll check.

Check the Mounting

Augers hang in a fixed centre or side shift cradle, trenchers use a side shift frame, mini loader augers use a 2 way or 4 way swing frame, and Kovaco attachments are made to order to suit your loader's mounting. Tell us your loader make and model and we'll match the frame to it.

Work Within Your Rated Operating Capacity

Check the attachment's weight and the load you'll carry against your loader's rated operating capacity, especially with pallet forks. If you lift loads with a skid steer, LOLER applies, so have the machine and forks thoroughly examined as your examination scheme requires.

Common Uses for Skid Steer Attachments

  • Drilling fence post holes and tree pits
  • Drilling holes for signs, lighting columns and foundations
  • Moving pallets of blocks and bricks around rough sites
  • Levelling, loading and grabbing material with a 4 in 1 bucket
  • Sweeping yards, roads, car parks and sports courts
  • Trenching for cables, pipes and drainage
  • Trimming roadside and field hedges
  • Crushing concrete and rubble for reuse
  • Planing out tree stumps and splitting logs
  • Mixing concrete where a mixer lorry can't reach

Skid Steer Attachment Guides

Skid Steer Attachments FAQs

Will these attachments fit my skid steer?

We match the mounting frame to your machine. Tell us your skid steer or mini loader make, model and year when you request a quote, and we'll confirm the fit before you order.

What's the difference between standard flow and high flow?

A high flow skid steer's auxiliary circuit delivers more oil, so it can run bigger hydraulic drives. The 3000 to 4500 MAX skid steer augers need 27 to 95 l/min, and the 5500 to 8000 MAX need 40 to 150 l/min. If you're not sure which your loader has, check its spec sheet or ask us.

Why don't you show prices online?

The price depends on the attachment, its size and the frame your loader needs, so we quote each one to make sure you get the right setup at the right price.

Do you deliver across the UK?

Yes. We deliver skid steer attachments across the UK, and we'll include the delivery cost in your quote.

Looking for something else? See our excavator attachments, telehandler attachments and forklift attachments.