Brick Pack Scissor Grab – Type 1311, Up to 2000kg

The brick pack scissor grab is our largest grab, made to lift whole packs of bricks, blocks, pavers and kerbs up to four layers high, or five layers with the taller Type 1311-60. Builders' merchants use it to unload lorries and move stock around the yard without pallets.

As the crane takes the weight, the scissor action squeezes the jaws onto the pack, and an automatic lock helps keep it secure. The free height adjusts to suit your packs, the pivot points are greasable, and there are hooks for a safety net. The jaws are 1200mm long as standard and can be swapped for other lengths. Hang it from a crane hook, or use it on a forklift with our scissor grab yoke.

Specifications

Key Features

• Lifts packs of bricks, blocks and pavers up to five layers
• Adjustable free height to suit different pack sizes
• Automatic locking and hooks for a safety net
• Greasable pivot points and interchangeable jaws
• Made in the UK and supplied fully tested

Before You Order

Measure the width and height of your largest pack and check it sits within the span and free height. The 1311 suits standard packs up to four layers, and the 1311-60 gives the extra height for five-layer block paver packs. Your crane or forklift carries the grab as well as the pack, so add 275kg or 320kg to the load when you check its capacity.

Scissor grabs are lifting accessories under LOLER, so they need a thorough examination at least every six months unless your examination scheme says otherwise. Read how to choose a scissor grab, then request a quote with your pack sizes and whether you'll use a crane or a forklift.

Related Attachments

For one or two layers of blocks and slabs, see the block and slab scissor grab. To use this grab on a forklift, add the forklift scissor grab yoke. Compare every model in our scissor grabs range, or browse our forklift attachments.