HB Kerb Lifter – Type 2469, 100kg

The HB kerb lifter picks up one standard UK HB kerb widthways, so you can lay heavy kerbs from a crane or forklift instead of lifting them by hand. At 17kg it's light and compact, so it suits smaller site machines, and it's a practical choice for highways contractors and local authority teams.

It works on a simple scissor principle with no hydraulics or power. GS20 rubber pads grip the kerb firmly, and an automatic lock holds the lifter open between lifts so you can move straight on to the next kerb.

Specifications

Key Features

• Lifts one standard HB kerb at a time
• Light and compact at 17kg
• GS20 rubber pads for a firm grip
• No hydraulics, wiring or power to maintain
• Made in the UK and supplied fully tested

Before You Order

The jaws open from 125mm to 150mm, so check your kerb's width falls in that range, and the lifter is rated at 100kg. For wider kerbs or slabs, the single kerb grab opens from 300mm to 1000mm.

Scissor grabs are lifting accessories under LOLER, so they need a thorough examination at least every six months unless your examination scheme says otherwise. Read how to choose a scissor grab, then request a quote with your kerb type and whether you'll use a crane or a forklift.

Related Attachments

For one or two layers of kerbs at once, see the double layer kerb grab. To use this lifter on a forklift, add the forklift scissor grab yoke. Compare every model in our scissor grabs range, or browse our forklift attachments.