Single Kerb Grab – Type 2474, 300 to 1000mm Span

The single kerb grab lifts one kerbstone or slab at a time, with jaws that adjust from 300mm to 1000mm. Merchants' yards and storage depots use it to move single items without putting them on a pallet, which also saves on pallet costs.

Spring-loaded plunger pins let you change the span in seconds. GS20 rubber pads give a strong grip without damaging the load, and a retaining bolt stops the compression arms pushing the jaws out of position. It weighs just 35kg and needs no power or hydraulics.

Specifications

Key Features

• Lifts single kerbs and slabs
• Span adjusts from 300mm to 1000mm with plunger pins
• GS20 rubber pads and a retaining bolt on the jaws
• Light at 35kg, with no power needed
• Made in the UK and supplied fully tested

Before You Order

The single kerb grab is rated at 300kg, so check the weight of your heaviest kerb or slab and that its width sits between 300mm and 1000mm. For packs of kerbs, the double layer kerb grab lifts one or two layers at once.

Scissor grabs are lifting accessories under LOLER, so they need a thorough examination at least every six months unless your examination scheme says otherwise. Read how to choose a scissor grab, then request a quote with your kerb or slab sizes and whether you'll use a crane or a forklift.

Related Attachments

For standard HB kerbs, see the HB kerb lifter. To use this grab on a forklift, add the forklift scissor grab yoke. Compare every model in our scissor grabs range, or browse our forklift attachments.